[Discuss-gnuradio] Is git commit access open to everyone?

[Elvis Dowson]

Hi,
      I was quite surprised when I had commit access to the master branch. 
Isn't that a bit too open, or uncontrolled? :-) Not that I'm complaining, but 
mistakes can happen, and the worst kind of mistake is if someone does a forced 
update from their local branch to the git master branch, thereby over-writing 
all changes on the master branch.

The following patch adds support for the WBX daughterboard, when used with the 
USRP2.

>From 2f149cf2aa094e50bbcfea81d17d874a2f86588e Mon Sep 17 00:00:00 2001
From: Elvis Dowson <address@hidden>
Date: Mon, 9 May 2011 23:33:46 +0400
Subject: [PATCH] gnuradio-exampes/python/usrp2/usrp2_wfm_rcv: Add support for 
WBX daughterboard.

Signed-off-by: Elvis Dowson <address@hidden>
---
 gnuradio-examples/python/usrp2/usrp2_wfm_rcv.py |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/gnuradio-examples/python/usrp2/usrp2_wfm_rcv.py 
b/gnuradio-examples/python/usrp2/usrp2_wfm_rcv.py
index 1783660..2b94c45 100755
--- a/gnuradio-examples/python/usrp2/usrp2_wfm_rcv.py
+++ b/gnuradio-examples/python/usrp2/usrp2_wfm_rcv.py
@@ -87,7 +87,8 @@ class wfm_rx_block (stdgui2.std_top_block):
                 dbid == 0x0040 or #usrp_dbid.TV_RX_REV_3
                 dbid == 0x0043 or #usrp_dbid.TV_RX_MIMO
                 dbid == 0x0044 or #usrp_dbid.TV_RX_REV_2_MIMO
-                dbid == 0x0045 ): #usrp_dbid.TV_RX_REV_3_MIMO
+                dbid == 0x0045 or #usrp_dbid.TV_RX_REV_3_MIMO
+                dbid == 0x0053 ): #usrp_dbid.WBX
             print "This daughterboard does not cover the required frequency 
range"
             print "for this application.  Please use a BasicRX or TVRX 
daughterboard."
             raw_input("Press ENTER to continue anyway, or Ctrl-C to exit.")
-- 
1.7.0.4


Elvis Dowson