Re: A little problems

[Theodore C. Belding]

I don't think the problem is so much the database format change as the RPM
format change from 3.x to 4.x. All you should have to do is install RPM
4.0.2 and db3; you shouldn't have to upgrade to RH 7.1. You also shouldn't
have to convert the RPM database format immediately, although it is
recommended.
-Ted

http://redhat.com/support/errata/RHEA-2001-015.html
http://redhat.com/support/errata/RHEA-2001-016.html

On Sat, 5 May 2001 address@hidden wrote:

> RPMs built for RedHat 7x systems cannot be installed in older systems
> because of a change in the database format.
>
> I used to have gcc-2.95.2 that was built for that 6.x system. Ah, yes,
> here they are.
>
> http://lark.cc.ukans.edu/~pauljohn/Swarm/miscSupportSoftware/gcc-upgrades/2.95.2/
>
> Sorry, I don't have 2.95.3 RPMS for old Redhat systems. You ought to
> consider upgrading your RedHat, because you won't be able to use any
> RPMs I build from here going forward unless you do it.
>
> pj
>
> liuxg wrote:
> >
> > Hi , all,
> >    I'm a new guy to swarm and I met a little problem.
> > My OS is RedHat 6.1 with egcs 1.1.2, when I upgrade
> > gcc to gcc-2.95.3-27.i386.rpm which download from
> > Paul E. Johnson's website, It reported:
> > >rpm -Uvh  gcc-2.95.3-27.i386.rpm
> > >only packages with major numbers <= 3 are supported by this version of RPM
> > >error: libstdc++-2.10.0-27.i386.rpm cannot be installed
> >
> > Anybody can tell me Why? and how can I resolve it  ?
> >
> > thanks in advances!
> >   ______
> >             liuxg
> >             Dep of CS, nankai university
> >             address@hidden
> >
> >                   ==================================
>
>

-- 
Ted Belding                              address@hidden
University of Michigan Center for the Study of Complex Systems
Homepage: http://www-personal.umich.edu/~streak/
PGP key:  http://www-personal.umich.edu/~streak/pgp-key.html


                  ==================================
   Swarm-Support is for discussion of the technical details of the day
   to day usage of Swarm.  For list administration needs (esp.
   [un]subscribing), please send a message to <address@hidden>
   with "help" in the body of the message.