Re: [STUMP] Building StumpWM/CLisp on Ubuntu

[Sébastien Vauban]

Hi all,

> Magnus Henoch wrote:
>> Sébastien Vauban <address@hidden>
>> writes:
>>
>>> checking for X... (cached) no
>>
>> "Cached" sounds bad.  Could you try removing the config.cache file?
>
> [...] Removing that file had the following effect: [...] when `make'ing
> CLisp:
>
> checking for X... (cached) libraries , headers 
> checking for gethostbyname... (cached) yes
> checking for connect... (cached) yes
> checking for remove... (cached) yes
> checking for shmat... (cached) yes
> checking for IceConnectionNumber in -lICE... (cached) yes
> checking size of KeySym... 4
> checking for XGetAtomNames... yes
> checking for Xpm library... yes
> checking for X shape extension... yes
> checking if XauGetAuthByAddr needs -lXau... no
> configure: ** NEW CLX (output)
> configure: updating cache ../../config.cache
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating link.sh
> config.status: creating config.h
> configure: ** NEW CLX (done)
> CLISP="/home/sva/src/clisp-2.48/src/clisp -K boot -B 
> /home/sva/src/clisp-2.48/src -N /home/sva/src/clisp-2.48/src/locale -E UTF-8 
> -Epathname 1:1 -Emisc 1:1 -norc" ; cd clx/new-clx ; make clisp-module 
> CC="gcc" CPPFLAGS="-I/home/sva/src/clisp-2.48/tools/i686-pc-linux-gnu/include 
> -I/home/sva/src/clisp-2.48/src/gllib" CFLAGS="-g -O2 -W -Wswitch -Wcomment 
> -Wpointer-arith -Wimplicit -Wreturn-type -Wmissing-declarations 
> -Wno-sign-compare -Wno-format-nonliteral -O2 -fexpensive-optimizations 
> -falign-functions=4 -DUNICODE -DNO_TERMCAP_NCURSES -DDYNAMIC_FFI -I." 
> CLFLAGS="" LIBS="-ldl /usr/local/lib/libavcall.a /usr/local/lib/libcallback.a 
>  -L/home/sva/src/clisp-2.48/tools/i686-pc-linux-gnu/lib -lsigsegv -lc" 
> RANLIB="ranlib" CLISP="$CLISP -q" SHREXT=.so
> make[1]: Entering directory `/home/sva/src/clisp-2.48/src/clx/new-clx'
> /home/sva/src/clisp-2.48/src/clisp -K boot -B /home/sva/src/clisp-2.48/src -N 
> /home/sva/src/clisp-2.48/src/locale -E UTF-8 -Epathname 1:1 -Emisc 1:1 -norc 
> -q -i clx-preload.lisp -c clx.lisp
> ;; Loading file clx-preload.lisp ...
> ;; Loaded file clx-preload.lisp
> ;; Compiling file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.lisp ...
> ;; Wrote file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.fas
> The following functions were used but not defined:
>  XLIB::%GCONTEXT-KEY->MASK XLIB::ATOM-NAME XLIB::INTERN-ATOM
>  XLIB::LOOKUP-WINDOW XLIB::WINDOW-ID XLIB::SET-WM-HINTS
>  XLIB::VISUAL-INFO XLIB::LOOKUP-RESOURCE-ID XLIB::DRAWABLE-ID
>  XLIB::GCONTEXT-ID XLIB::CURSOR-ID XLIB::FONT-ID XLIB::LOOKUP-COLORMAP
>  XLIB::WINDOW-DISPLAY XLIB::COLORMAP-ID XLIB::CARD8->CHAR
>  XLIB::GET-PROPERTY XLIB::CHAR->CARD8 XLIB::CHANGE-PROPERTY
>  XLIB::SCREEN-ROOT XLIB::DISPLAY-DEFAULT-SCREEN XLIB::LIST-PROPERTIES
>  XLIB::ROTATE-PROPERTIES XLIB::COLORMAP-VISUAL-INFO
>  XLIB::DISPLAY-DISPLAY XLIB::DISPLAY-HOST
>  XLIB::DISPLAY-PROTOCOL-MAJOR-VERSION
>  XLIB::DISPLAY-PROTOCOL-MINOR-VERSION XLIB::DISPLAY-RELEASE-NUMBER
>  XLIB::DISPLAY-VENDOR-NAME XLIB::DRAWABLE-HEIGHT XLIB::DRAWABLE-WIDTH
>  XLIB::DRAWABLE-X XLIB::DRAWABLE-Y XLIB::%UNTRACED-COLOR-RED
>  XLIB::%UNTRACED-COLOR-GREEN XLIB::%UNTRACED-COLOR-BLUE
>  XLIB::%UNTRACED-DISPLAY-DISPLAY XLIB::%UNTRACED-DISPLAY-VENDOR-NAME
>  XLIB::%UNTRACED-DISPLAY-RELEASE-NUMBER
>  XLIB::%UNTRACED-DISPLAY-PROTOCOL-MAJOR-VERSION
>  XLIB::%UNTRACED-DISPLAY-PROTOCOL-MINOR-VERSION
>  XLIB::%UNTRACED-COLORMAP-VISUAL-INFO XLIB::%UNTRACED-VISUAL-INFO-CLASS
>  XLIB::CLOSED-DISPLAY-P XLIB::%UNTRACED-DRAWABLE-WIDTH
>  XLIB::%UNTRACED-DRAWABLE-HEIGHT XLIB::%UNTRACED-DRAWABLE-X
>  XLIB::%UNTRACED-DRAWABLE-Y XLIB::%UNTRACED-DISPLAY-HOST
>  XLIB::OPEN-DISPLAY XLIB::SET-DISPLAY-DEFAULT-SCREEN XLIB::CREATE-IMAGE
>  XLIB::MAKE-EVENT-MASK
> 0 errors, 0 warnings
> /home/sva/src/clisp-2.48/src/clisp -K boot -B /home/sva/src/clisp-2.48/src -N 
> /home/sva/src/clisp-2.48/src/locale -E UTF-8 -Epathname 1:1 -Emisc 1:1 -norc 
> -q -i clx-preload.lisp -c image.lisp
> ;; Loading file clx-preload.lisp ...
> ;; Loaded file clx-preload.lisp
> ;; Compiling file /home/sva/src/clisp-2.48/src/clx/new-clx/image.lisp ...
> ;; Loading file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.lib ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.lib
> ;; Wrote file /home/sva/src/clisp-2.48/src/clx/new-clx/image.fas
> The following functions were used but not defined:
>  XLIB::CREATE-PIXMAP XLIB::CREATE-GCONTEXT XLIB::PUT-IMAGE
>  XLIB::COPY-AREA XLIB::FREE-GCONTEXT
> 0 errors, 0 warnings
> /home/sva/src/clisp-2.48/src/clisp -K boot -B /home/sva/src/clisp-2.48/src -N 
> /home/sva/src/clisp-2.48/src/locale -E UTF-8 -Epathname 1:1 -Emisc 1:1 -norc 
> -q -i clx-preload.lisp -c resource.lisp
> ;; Loading file clx-preload.lisp ...
> ;; Loaded file clx-preload.lisp
> ;; Compiling file /home/sva/src/clisp-2.48/src/clx/new-clx/resource.lisp ...
> ;; Loading file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.lib ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.lib
> ;; Wrote file /home/sva/src/clisp-2.48/src/clx/new-clx/resource.fas
> The following functions were used but not defined:
>  XLIB::CARD8->CHAR XLIB::DISPLAY-DEFAULT-SCREEN XLIB::SCREEN-ROOT
>  XLIB::DISPLAY-ROOTS XLIB::GET-PROPERTY
> 0 errors, 0 warnings
> ../../ccmp2c clx.f > genclx.c
> ./genclx -l -o clx.e > clx.e
> rm -f genclx.c
> rm -f genclx
> cp clx.e clx.d
> /home/sva/src/clisp-2.48/src/clisp -K boot -B /home/sva/src/clisp-2.48/src -N 
> /home/sva/src/clisp-2.48/src/locale -E UTF-8 -Epathname 1:1 -Emisc 1:1 -norc 
> -q -C $(/home/sva/src/clisp-2.48/src/clisp -K boot -B 
> /home/sva/src/clisp-2.48/src -N /home/sva/src/clisp-2.48/src/locale -E UTF-8 
> -Epathname 1:1 -Emisc 1:1 -norc -q -b)/linkkit/modprep clx.d clx.c
> ;; MODPREP: "clx.d" --> "clx.c"
> ;; MODPREP: reading "clx.d": 352,068 bytes, 8,773 lines
> WARNING: "clx.d":1830:XLIB:OPEN-DISPLAY: emulating signature (1 0 
> &ALLOW-OTHER-KEYS)
> WARNING: "clx.d":3599:XLIB:COPY-AREA: emulating signature (9 0)
> WARNING: "clx.d":3619:XLIB:COPY-PLANE: emulating signature (10 0)
> WARNING: "clx.d":3688:XLIB:DRAW-LINE: emulating signature (6 1)
> WARNING: "clx.d":3774:XLIB:DRAW-RECTANGLE: emulating signature (6 1)
> WARNING: "clx.d":3811:XLIB:DRAW-ARC: emulating signature (8 1)
> WARNING: "clx.d":4022:XLIB:DRAW-GLYPH: emulating signature (5 0 &KEY)
> WARNING: "clx.d":4029:XLIB:DRAW-GLYPHS: emulating signature (5 0 &KEY)
> WARNING: "clx.d":4035:XLIB:DRAW-IMAGE-GLYPH: emulating signature (5 0 &KEY)
> WARNING: "clx.d":4040:XLIB:DRAW-IMAGE-GLYPHS: emulating signature (5 0 &KEY)
> WARNING: "clx.d":5402:XLIB:CHANGE-PROPERTY: emulating signature (5 0 &KEY)
> WARNING: "clx.d":6151:XLIB:QUEUE-EVENT: emulating signature (2 0 
> &ALLOW-OTHER-KEYS)
> WARNING: "clx.d":6247:XLIB:SEND-EVENT: emulating signature (3 0 
> &ALLOW-OTHER-KEYS)
> WARNING: "clx.d":6393:XLIB:WARP-POINTER-IF-INSIDE: emulating signature (6 2)
> WARNING: "clx.d":6413:XLIB:WARP-POINTER-RELATIVE-IF-INSIDE: emulating 
> signature (5 2)
> ;; MODPREP: 543 objects, 410 DEFUNs (15 emulated), 1 DEFVAR (1 init)
> ;; packages: ("XPM" "XLIB")
> MODPREP: wrote clx.c (577,624 bytes)
> make[1]: Leaving directory `/home/sva/src/clisp-2.48/src/clx/new-clx'
> rm -rf base
> CLISP_LINKKIT=. MAKE=make ./clisp-link add boot base i18n syscalls regexp || 
> (rm -rf base ; exit 1)
> make[1]: Entering directory `/home/sva/src/clisp-2.48/src/i18n'
> make[1]: Nothing to be done for `clisp-module'.
> make[1]: Leaving directory `/home/sva/src/clisp-2.48/src/i18n'
> make[1]: Entering directory `/home/sva/src/clisp-2.48/src/syscalls'
> make[1]: Nothing to be done for `clisp-module'.
> make[1]: Leaving directory `/home/sva/src/clisp-2.48/src/syscalls'
> make[1]: Entering directory `/home/sva/src/clisp-2.48/src/regexp'
> make[1]: Nothing to be done for `clisp-module'.
> make[1]: Leaving directory `/home/sva/src/clisp-2.48/src/regexp'
> boot/lisp.run -B . -M boot/lispinit.mem -norc -q -i i18n/preload.lisp -i 
> syscalls/preload.lisp -i regexp/preload.lisp -x (saveinitmem 
> "base/lispinit.mem")
> ;; Loading file i18n/preload.lisp ...
> ;; Loaded file i18n/preload.lisp
> ;; Loading file syscalls/preload.lisp ...
> ;; Loaded file syscalls/preload.lisp
> ;; Loading file regexp/preload.lisp ...
> ;; Loaded file regexp/preload.lisp
> ;; Wrote the memory image into base/lispinit.mem (1,942,240 bytes)
> Bytes permanently allocated:             89,056
> Bytes currently in use:               1,852,256
> Bytes available until next GC:          522,128
> 1852256 ;
> 522128 ;
> 89056 ;
> 1 ;
> 127272 ;
> 32002
> base/lisp.run -B . -M base/lispinit.mem -norc -q -i i18n/i18n -i 
> syscalls/posix -i regexp/regexp -x (saveinitmem "base/lispinit.mem")
> ;; Loading file /home/sva/src/clisp-2.48/src/i18n/i18n.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/i18n/i18n.fas
> ;; Loading file /home/sva/src/clisp-2.48/src/syscalls/posix.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/syscalls/posix.fas
> ;; Loading file /home/sva/src/clisp-2.48/src/regexp/regexp.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/regexp/regexp.fas
> ;; Wrote the memory image into base/lispinit.mem (2,131,496 bytes)
> Bytes permanently allocated:             92,512
> Bytes currently in use:               2,035,616
> Bytes available until next GC:          522,128
> 2035616 ;
> 522128 ;
> 92512 ;
> 2 ;
> 438512 ;
> 52003
> rm -rf full
> CLISP_LINKKIT=. MAKE=make ./clisp-link add base full clx/new-clx || (rm -rf 
> full ; exit 1)
> make[1]: Entering directory `/home/sva/src/clisp-2.48/src/clx/new-clx'
> make[1]: Nothing to be done for `clisp-module'.
> make[1]: Leaving directory `/home/sva/src/clisp-2.48/src/clx/new-clx'
> base/lisp.run -B . -M base/lispinit.mem -norc -q -i 
> clx/new-clx/clx-preload.lisp -x (saveinitmem "full/lispinit.mem")
> ;; Loading file clx/new-clx/clx-preload.lisp ...
> ;; Loaded file clx/new-clx/clx-preload.lisp
> ;; Wrote the memory image into full/lispinit.mem (2,131,744 bytes)
> Bytes permanently allocated:             92,512
> Bytes currently in use:               2,035,864
> Bytes available until next GC:          522,128
> 2035864 ;
> 522128 ;
> 92512 ;
> 1 ;
> 58168 ;
> 20001
> full/lisp.run -B . -M full/lispinit.mem -norc -q -i clx/new-clx/clx -i 
> clx/new-clx/image -i clx/new-clx/resource -x (saveinitmem "full/lispinit.mem")
> ;; Loading file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/clx/new-clx/clx.fas
> ;; Loading file /home/sva/src/clisp-2.48/src/clx/new-clx/image.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/clx/new-clx/image.fas
> ;; Loading file /home/sva/src/clisp-2.48/src/clx/new-clx/resource.fas ...
> ;; Loaded file /home/sva/src/clisp-2.48/src/clx/new-clx/resource.fas
> ;; Wrote the memory image into full/lispinit.mem (2,540,940 bytes)
> Bytes permanently allocated:            105,568
> Bytes currently in use:               2,429,824
> Bytes available until next GC:          604,756
> 2429824 ;
> 604756 ;
> 105568 ;
> 4 ;
> 1505648 ;
> 40001
>
>
> Sounds better. Good enough?  We'll see...
>
> From the `~/src/clisp-2.48/src', I then execute the following commands for
> finishing the installation of CLisp (located at `/usr/local/bin/clisp'):
>
> make check
> sudo make install
> cd ../..
>
> Then, installing StumpWM...
>
> git clone git://git.savannah.nongnu.org/stumpwm.git
>
> cd stumpwm
> autoconf
>
> ./configure --with-lisp=clisp 
> --with-ppcre=/usr/share/common-lisp/source/cl-ppcre
> sudo make
>
> sudo install /home/sva/src/stumpwm/stumpwm /usr/local/bin/
> sudo cp /home/sva/src/stumpwm/contrib/stumpish /usr/local/bin/
>
>
> But login out of Gnome and login into StumpWM does not work. StumpWM crashes
> and the login manager notices that the session did not even last for 10
> seconds...
>
> More info is available in `~/.xsession-errors' it says. Here it is:
>
> /etc/gdm/Xsession: Beginning session setup...
> Setting IM through im-switch for locale=en_US.
> Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to 
> /etc/X11/xinit/xinput.d/default.
> I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
> I: caps.c: Dropping root privileges.
> I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
> N: main.c: Called SUID root and real-time and/or high-priority scheduling was 
> requested in the configuration. However, we lack the necessary privileges:
> N: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the 
> requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO 
> resource limits.
> N: main.c: For enabling real-time/high-priority scheduling please acquire the 
> appropriate PolicyKit privileges, or become a member of 'pulse-rt', or 
> increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
>
> (gnome-settings-daemon:17975): GLib-CRITICAL **: g_propagate_error: assertion 
> `src != NULL' failed
>
> (gnome-settings-daemon:17975): GLib-CRITICAL **: g_propagate_error: assertion 
> `src != NULL' failed
> GNOME_KEYRING_SOCKET=/tmp/keyring-Tw8iMe/socket
> SSH_AUTH_SOCK=/tmp/keyring-Tw8iMe/socket.ssh
> Checking for Xgl: not present. 
> xset q doesn't reveal the location of the log file. Using fallback 
> /var/log/Xorg.0.log 
> Detected PCI ID for VGA: 
> Checking for texture_from_pixmap: present. 
> Checking for non power of two support: present. 
> Checking for Composite extension: present. 
> Checking screen 1Comparing resolution (1280x800) to maximum 3D texture size 
> (4096): Passed.
> Checking for Software Rasterizer: Not present. 
> Checking for nVidia: present. 
> Checking for FBConfig: present. 
> running under gnome seesion, checking for gnomecompat
> Checking for Xgl: not present. 
> /usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling 
> YV12 image format
> ** (gnome-panel:18046): DEBUG: Adding applet 0.
> ** (gnome-panel:18046): DEBUG: Initialized Panel Applet Signaler.
> ** (gnome-panel:18046): DEBUG: Adding applet 1.
> ** (gnome-panel:18046): DEBUG: Adding applet 2.
> ** (gnome-panel:18046): DEBUG: Adding applet 3.
> ** (gnome-panel:18046): DEBUG: Adding applet 4.
> ** (gnome-panel:18046): DEBUG: Adding applet 5.
> ** (gnome-panel:18046): DEBUG: Adding applet 6.
> ** (gnome-panel:18046): DEBUG: Adding applet 7.
> ** (gnome-panel:18046): DEBUG: Adding applet 8.
> ** (gnome-panel:18046): DEBUG: Adding applet 9.
> ** (gnome-panel:18046): DEBUG: Adding applet 10.
> ** (gnome-panel:18046): DEBUG: Adding applet 11.
> ** (gnome-panel:18046): DEBUG: Adding applet 12.
> ** (gnome-panel:18046): DEBUG: Adding applet 13.
>
> ** (nautilus:18047): WARNING **: Unable to add monitor: Not supported
> Nautilus-Share-Message: Called "net usershare info" but it failed: 'net 
> usershare' returned error 255: net usershare: cannot open usershare directory 
> /var/lib/samba/usershares. Error No such file or directory
> Please ask your system administrator to enable user sharing.
>
> I/O warning : failed to load external entity 
> "/home/sva/.compiz/session/102e3db2aeecc13b63125257775361094900000178150022"
> Starting gtk-window-decorator
>
> (gnome-panel:18046): Gdk-WARNING **: 
> /build/buildd/gtk+2.0-2.16.1/gdk/x11/gdkdrawable-x11.c:878 drawable is not a 
> pixmap or window
>
> (gnome-panel:18046): libglade-WARNING **: Unexpected element 
> <requires-version> inside <glade-interface>.
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: old state indicates that this was not a 
> disconnect 0
> ** (gnome-panel:18046): DEBUG: Adding applet 14.
> ** (gnome-panel:18046): DEBUG: Adding applet 15.
>
> (gnome-panel:18046): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to 
> allocate widget with width -5 and height 24
>
> (bluetooth-applet:18070): Gdk-CRITICAL **: 
> gdk_window_thaw_toplevel_updates_libgtk_only: assertion 
> `private->update_and_descendants_freeze_count > 0' failed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> evolution-alarm-notify-Message: Setting timeout for 49415 1252627200 
> 1252577785
> evolution-alarm-notify-Message:  Fri Sep 11 02:00:00 2009
>
> evolution-alarm-notify-Message:  Thu Sep 10 12:16:25 2009
>
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (update-notifier:18071): DEBUG: /usr/lib/update-notifier/apt-check 
> returned 3 (security: 0)
> ** (update-notifier:18071): DEBUG: crashreport_check
>
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
>
> ** (nm-applet:18072): WARNING **: _nm_object_get_property: Error getting 
> 'Default' for /org/freedesktop/NetworkManager/ActiveConnection/7: Method 
> "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" 
> doesn't exist
>
>
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: going for offline with icon: 
> notification-network-wireless-disconnected
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** Message: <info>  New secrets for Auto 
> MisCrit-11-1/802-11-wireless-security requested; ask the user
>
>
> ** (nm-applet:18072): WARNING **: applet-device-wifi.c.1539 
> (get_secrets_dialog_response_cb): canceled
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: applet_common_device_state_changed
> ** (nm-applet:18072): DEBUG: old state indicates that this was not a 
> disconnect 9
> ** (nm-applet:18072): DEBUG: going for offline with icon: 
> notification-network-wireless-disconnected
> ** (update-notifier:18071): DEBUG: /usr/lib/update-notifier/apt-check 
> returned 3 (security: 0)
> Xlib:  extension "XFree86-Misc" missing on display ":0.0".
> Xlib:  extension "XFree86-Misc" missing on display ":0.0".
> Xlib:  extension "XFree86-Misc" missing on display ":0.0".
> database table: ubiquity_suggestion_memory already exists
>
>
> For sure, typing `stumpwm' in a terminal does not work either:
>
>   i i i i i i i       ooooo    o        ooooooo   ooooo   ooooo
>   I I I I I I I      8     8   8           8     8     o  8    8
>   I  \ `+' /  I      8         8           8     8        8    8
>    \  `-+-'  /       8         8           8      ooooo   8oooo
>     `-__|__-'        8         8           8           8  8
>         |            8     o   8           8     o     8  8
>   ------+------       ooooo    8oooooo  ooo8ooo   ooooo   8
>
> Welcome to GNU CLISP 2.48 (2009-07-28) <http://clisp.cons.org/>
>
> Copyright (c) Bruno Haible, Michael Stoll 1992, 1993
> Copyright (c) Bruno Haible, Marcus Daniels 1994-1997
> Copyright (c) Bruno Haible, Pierpaolo Bernardi, Sam Steingold 1998
> Copyright (c) Bruno Haible, Sam Steingold 1999-2000
> Copyright (c) Sam Steingold, Bruno Haible 2001-2009
>
> Type :h and hit Enter for context help.
>
> *** - SYSTEM::%STRUCTURE-STORE: 49 is not a valid index into
>       #<XLIB:DISPLAY localhost:0 (The X.Org Foundation R10600000) X11.0 
> #x21A5F3C6>
>
> Bye.
>
>
> Anybody can help?  I'm sure I'm not so far from the ultimate goal...
>
> Best regards,
>   Seb

Nobody understanding what's the missing piece to this nice puzzle?

Best regards,
  Seb

-- 
Sébastien Vauban