qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] Corrected memory regions


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [PATCH] Corrected memory regions
Date: Wed, 14 Nov 2018 12:38:49 +0100

Hi Seth,

On Wed, Nov 14, 2018 at 8:25 AM Seth K <address@hidden> wrote:
>
> I corrected these 2 memory regions based on specifications from the chip
> manufacturer. The existing ranges seem to overlap and and cause odd
> behavior and/or crashes when trying to set up multiple UARTs,
> I also played with changing MAX_SERIAL_PORTS to 8 to match the hardware,
> but I did not include that in this patch as I never fully tested its
> effects.
> This is my first patch, I hope I did it correctly,
> Seth Kintigh

Welcome to QEMU, and thanks for your patch :)

I checked the DocID15818 (Rev 15) datasheet for this chip and your
patch is technically correct.

I suggest the patch title as "hw/arm/stm32f205: Fix the UART and Timer
region size" (note: use present rather than past).

However for the legal stuff, the QEMU project states all patches "must
include a Signed-off-by: line".
Please have a look at the following page which explains everything you
need to know in order to send useful contributions:
https://wiki.qemu.org/Contribute/SubmitAPatch#Patch_emails_must_include_a_Signed-off-by:_line

> ---

Note than the commit message stay in the repository history forever.
You can add information not related to the patch below the previous
"---" line, it will be cut out when your patch is applied to the
repository.
Here would go your "This is my first patch, I hope I did it correctly"
and signature.

Regards,

Phil.

>  hw/char/stm32f2xx_usart.c  | 2 +-
>  hw/timer/stm32f2xx_timer.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c
> index 032b5fda13..f3363a2952 100644
> --- a/hw/char/stm32f2xx_usart.c
> +++ b/hw/char/stm32f2xx_usart.c
> @@ -202,7 +202,7 @@ static void stm32f2xx_usart_init(Object *obj)
>      sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
>
>      memory_region_init_io(&s->mmio, obj, &stm32f2xx_usart_ops, s,
> -                          TYPE_STM32F2XX_USART, 0x2000);
> +                          TYPE_STM32F2XX_USART, 0x400);
>      sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
>  }
>
> diff --git a/hw/timer/stm32f2xx_timer.c b/hw/timer/stm32f2xx_timer.c
> index 58fc7b1188..ae744d1642 100644
> --- a/hw/timer/stm32f2xx_timer.c
> +++ b/hw/timer/stm32f2xx_timer.c
> @@ -308,7 +308,7 @@ static void stm32f2xx_timer_init(Object *obj)
>      sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
>
>      memory_region_init_io(&s->iomem, obj, &stm32f2xx_timer_ops, s,
> -                          "stm32f2xx_timer", 0x4000);
> +                          "stm32f2xx_timer", 0x400);
>      sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
>
>      s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, stm32f2xx_timer_interrupt,
> s);
> --
> 2.11.0



reply via email to

[Prev in Thread] Current Thread [Next in Thread]