[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Plex86-devel] Error Starting plex86
From: |
Eric Laberge |
Subject: |
Re: [Plex86-devel] Error Starting plex86 |
Date: |
Wed, 24 Jul 2002 15:44:59 -0400 |
User-agent: |
KMail/1.4.2 |
On Wed July 24 2002 14:54, Prasad wrote:
> I am sorry, but this is a casual doubt about the plex86.
> I wanted to try out plex86 but am getting the following error... also
> given is the complete log that i get...
>
> please help me out...
>
> LOG BEGINS HERE
> Processing command-line options
> Opening VM (/dev/plex86)
> Processing config file prasad.cfg...
> Allocating 16MB of physical memory in VM
> Mapping virtualized physical memory into monitor
> Zeroing virtualized physical memory
> Mapping monitor print buffer into user mem.
> [CMOS ] <INFO> Setting initial clock to: Thu Jul 25 00:37:17 2002
> [DMA ] <INFO> channel 4 used by cascade
> [XGUI ] <INFO> test_alloc_colors: 16 colors available out of 16 colors
> tried [XGUI ] <INFO> font 8 wide x 16 high, display depth = 24
> [VGA ] <INFO> interval=300000
> [VGA ] <INFO> VBE Bochs Display Extension Enabled
> [KBD ] <INFO> Pasting not supported yet in Plex86
> [HD ] <INFO> hd0: '/dev/hda'
######
Are you absolutely certain you want to access your REAL hard drive?
######
> [HD ] <INFO> Boot device will be 'c'
> [HD ] <INFO> Floppy boot signature check is enabled
> ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
> ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
> Setting prescan depth to 3
> prescan on
> Processed 70 lines of config file 'prasad.cfg'
> Initializing plugins
> Running VM
>
> ::init_monitor OK -----------------
>
> nexus_size = 0x24E
>
> ::plex86 panic:
> ::handleMonFault called recursively.
>
> Fatal monitor error caused Panic
> eax:0x0
> ebx:0x0
> ecx:0x0
> edx:0x503
> ebp:0x0
> esi:0x0
> edi:0x0
> esp:0x0
> eflags:0x2
> eip:0xfff0
> cs:s=0xf000, dl=0xffff, dh=0x9b0f, valid=1
> ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
> ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
> es:s=0x0, dl=0xffff, dh=0x9300, valid=1
> fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
> tr:s=0x0, dl=0x0, dh=0x0, valid=0
> gdtr:base=0x0, limit=0x0
> idtr:base=0x0, limit=0x3ff
> dr0:0x0
> dr1:0x0
> dr2:0x0
> dr3:0x0
> dr6:0xffff0ff0
> dr7:0x400
> tr3:0x0
> tr4:0x0
> tr5:0x0
> tr6:0x0
> tr7:0x0
> cr0:0x60000032
> cr1:0x0
> cr2:0x0
> cr3:0x0
> cr4:0x0
> inhibit_mask:0
> Stack dump:
> Current instruction:
> F000.0000FFF0 E968E0 ljmp $0xf000, $0xe05b
#####
It looks like the very first instruction executed by the BIOS.
#####
>
> Shutting down plugins
> [XGUI ] <INFO> Exit.
> Unmapping guest physical memory.
> Unmapping monitor print buffer.
> Tearing down VM
> Closing VM
>
> END OF LOG
Could you please attach your config file and tell us which version of Plex you
tried?
Thanks
--
Eric Laberge
Jabber ID: address@hidden
GCS/M/S d-(++) s-: a-- C++(++++) UL+++>$ !P L++ E--- W++ N+ w++ !O M
!V PS PE Y PGP-(+++) t++(-) X- R* tv+ b+ DI+++ D+ G e+>+++++ h! r--