[Plex86-devel] Error Starting plex86

[Prasad]

I am sorry, but this is a casual doubt about the plex86.
I wanted to try out plex86 but am getting the following error... also 
given is the complete log that i get...

please help me out...

                LOG BEGINS HERE
Processing command-line options
Opening VM (/dev/plex86)
Processing config file prasad.cfg...
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
[CMOS ] <INFO>  Setting initial clock to: Thu Jul 25 00:37:17 2002
[DMA  ] <INFO>  channel 4 used by cascade
[XGUI ] <INFO>  test_alloc_colors: 16 colors available out of 16 colors tried
[XGUI ] <INFO>  font 8 wide x 16 high, display depth = 24
[VGA  ] <INFO>  interval=300000
[VGA  ] <INFO>  VBE Bochs Display Extension Enabled
[KBD  ] <INFO>  Pasting not supported yet in Plex86
[HD   ] <INFO>  hd0: '/dev/hda'
[HD   ] <INFO>  Boot device will be 'c'
[HD   ] <INFO>  Floppy boot signature check is enabled
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
prescan on
Processed 70 lines of config file 'prasad.cfg'
Initializing plugins
Running VM
::init_monitor OK -----------------
nexus_size = 0x24E

::plex86 panic: 
::handleMonFault called recursively.

Fatal monitor error caused Panic
eax:0x0
ebx:0x0
ecx:0x0
edx:0x503
ebp:0x0
esi:0x0
edi:0x0
esp:0x0
eflags:0x2
eip:0xfff0
cs:s=0xf000, dl=0xffff, dh=0x9b0f, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0x0, dl=0xffff, dh=0x9300, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
 F000.0000FFF0  E968E0                   ljmp    $0xf000, $0xe05b

Shutting down plugins
[XGUI ] <INFO>  Exit.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM

                                END OF LOG

-- 
Failure is not an option