Re: [Ltib] Install Dillo problem

[Stuart Hughes]

Hi Vic,

It may be that you do not have X selected in your configuration.

To check this, run:

$ ./ltib -m config

// quick way,

type s and in the search dialog enter Xorg

make sure the cross is marked in :

(X) X.Org 7.3

// alternative longer way

scroll down and select --- Package selection / Package list ---->

scroll down and find:

[ ] xfsprogs
   X11  --->
[ ] yaffs_utils

Highlight X11 and click enter, make sure for Install X11 it says:
(X.Org 7.3)
if not, click enter and select it.

When you're done, save/exit and then run:

$ ./ltib

Regards, Stuart


Vic wrote:
> Hi,
>  
> I'm new to Linux and just bought an EA LPC3250. I finished the "Getting
> Started with Linux on the LPC3250 OEM board" guide and had a successful
> build using the default configuration but only when I use 2.6.27.8
> instead of the 2.6.34 kernel. My objective is to run a Web browser and
> so I selected dillo from the LTIB configuration package list. When I run
> ./ltib, it failed on libXrender as seen below. and even if I deselect
> dillo, the libXrender error stays.
>  
> 1. How do recover from this? It seems the compilation messages have
> enough info to tell me what exactly is causing the issue.
> 2. What and Where is the file that has the environment settings? The
> guide mentioned about configuration settings such as CONFIG_NET and
> CONFIG_LPC32XX_MII but didnt mention where they are set.
>  
> Any help shall be very much appreciated.
>  
> Vic
>  
> here's the trail
> ...
> checking how to hardcode library paths into programs... immediate
> appending configuration tag "F77" to libtool
> checking for arm-linux-pkg-config... no
> checking for pkg-config... /opt/ltib/usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for X... configure: error: Package requirements (x11) were not met:
>  
> No package 'x11' found
>  
> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> installed software in a non-standard prefix.
>  
> Alternatively, you may set the environment variables X_CFLAGS
> and X_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
>  
> error: Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)
>  
> 
> RPM build errors:
>     Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)
> Build time for libXrender: 16 seconds
>  
> Failed building libXrender
>  
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:567
>  
> 
> Started: Thu Sep 30 02:37:46 2010
> Ended:   Thu Sep 30 02:41:40 2010
> Elapsed: 234 seconds
>  
> VERSION          : 10.1.1
> CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> PLATFORM         : ea3250
> GNUTARCH         : arm
> TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
>  
> These packages failed to build:
> libXrender
>  
> Build Failed
>  
> Exiting on error or interrupt
> address@hidden:~/ltib$ <mailto:address@hidden:~/ltib$>
>  
>  
>   
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib