Re: [Ltib] Problem while running Dillo2 browser on latest CVS LTIB code + IMX27 ADS board.

[Rajesh Marathe]

Stuart,

Thanks. I think I did not start X server earlier. I had compiled LTIB
with X Server option but did not find "startx" under rootfs on the
device. How to get the X started on the device ?

regards,
Rajesh Marathe.

On Mon, 2009-12-28 at 10:54 +0000, Stuart Hughes wrote:
> Hi Rajesh,
> 
> I don't have that board so can't look.  However, make sure you have 
> started the X server (with startx) first.  Also make sure you have the 
> framebuffer enabled in the kernel (it should be I think).
> 
> Regards, Stuart
> 
> Rajesh Marathe wrote:
> > Hi,
> > 
> > We are working on IMX27 ADS board and have taken latest CVS based LTIB
> > code. I have included 'Dillo2' and 'fltk' packages as my objective would
> > be to run the browser dillo on the imx27 system.
> > 
> > After the Linux boots up, I go to the console and try to run the
> > browser. But, I get the following error:
> > 
> > ----------------------------------------------------------------------
> > mx27#                                                                       
> >     
> > mx27#                                                                       
> >     
> > mx27# ./dillo                                                               
> >     
> > paths: Cannot open file
> > '//.dillo/dillorc'                                      
> > paths:
> > Using /usr/etc/dillo/dillorc                                             
> > paths: Cannot open file
> > '//.dillo/keysrc'                                       
> > paths:
> > Using /usr/etc/dillo/keysrc                                              
> > dillo_dns_init: Here we go!
> > (threaded)                                          
> > Disabling
> > cookies.                                                              
> > Can't open display
> > ":0.0"                                                       
> > mx27# 
> > ----------------------------------------------------------------------
> > 
> > I did try to debug and found out that the function fltk::open_display
> > returns the above display error.
> > 
> > How do I set the display correctly so that the browser's opening page
> > gets displayed on the LCD panel connected to IMX27 board ?
> > 
> > regards,
> > Rajesh Marathe.
> > 
> > 
> > 
> > _______________________________________________
> > LTIB home page: http://ltib.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> >