Re: [Ltib] LTIB is showing error

[Stuart Hughes]

Hi Niamathullah,

As this is an ISO image from Freescale I can't be sure what it uses (in 
that version) for detection of host packages.  You can look and find 
this in the file: bin/Ltibutils.pm.   The Savannah CVS version has this:

>     zlib         => sub { my @f = (glob('/usr/lib/libz.so*'),
>                                    glob('/lib/libz.so*'),
>                                    glob('/lib64/libz.so*')  ); @f > 1 ? 1 : 0 },
>     'zlib-devel' => sub { -f '/usr/include/zlib.h' },

If yours is the same, check to see you have the files it is testing for. 
 In the case of zlib, at least one of the files must exist.  In 
zlib-devel it's looking for just the single include file.

If your copy is not the same, you need to get help from Freescale (they 
neded to upgrade the BSP, or you need to use an early host distribution 
for the installation).


Regards, Stuart

Niamathullah sharief wrote:
> see the output
>
>     address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
>     sudo apt-get install zlib1g-dev
>
>     [sudo] password for ariem:
>
>     Reading package lists... Done
>
>     Building dependency tree
>
>     Reading state information... Done
>
>     zlib1g-dev is already the newest version.
>
>     zlib1g-dev set to manually installed.
>
>     0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
>
>
> STILL I AM GETTING THE SAME ERROR.HELP ME 
>
>
> On Tue, Dec 22, 2009 at 7:32 PM, Alan Carvalho de Assis 
> <address@hidden <mailto:address@hidden>> wrote:
>
>     Hi,
>
>     On 12/22/09, Niamathullah sharief <address@hidden
>     <mailto:address@hidden>> wrote:
>      > Hello, I am trying to install gstreamer codec in IMX51 board. for
>     that i
>      > downloaded onr document from website. I folloed the steps
>     accourding to that
>      > document. In that when i tried to install LTIB by giving command
>     ./ltib. It
>      > is not working. All other things are fine. I copies all the
>     things in /opt
>      > and i replaced the spec files. Now my error is
>      >
>      >
>     address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
>      >> ./ltib
>      >>
>      > sh: tclsh: command not found
>      >>
>      >
>      >> ltib cannot be run because one or more of the host packages
>     needed to run
>      >> it
>      >>
>      > are either missing or out of date or not in ltib's standard path.
>     Please
>      >>
>      > install/upgrade these packages on your host. If you have your own
>     utilities
>      >>
>      > in non-standard paths, please add an entry into the .ltibrc file for
>      >> example:
>      >>
>      >
>      >> %path_std
>      >>
>      > /usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/my/own/exes
>      >>
>      >
>      >> Package Minimum ver Installed info
>      >>
>      > ------- ----------- ---------------
>      >>
>      > zlib-devel 0 not installed
>      >>
>      > rpm 0 not installed
>      >>
>      > rpm-build 0 not installed
>      >>
>      > m4 0 not installed
>      >>
>      > bison 0 not installed
>      >>
>      > tcl 0 not installed
>      >>
>      >
>
>     You just need to install the above packages in your host computer. If
>     you use a Debian like distro (i.e. Ubuntu) use this:
>
>     sudo apt-get install zlib1g-dev
>
>     And so on, for all missing packages.
>
>     Best Regards,
>
>     Alan
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib