RE: [Ltib] Qtopia 2

[Kevin Wells]

Hmm, I saw this *once* on the 3250 a while back, but I was
experimenting with some changes at the time and discounted
it as something I did. I did do a recent test and the entire
/opt/qtopia/tree (qt2) area built fine.

Can one of you please send over defconfig.dev file and I'll
try it once here? It might also help to do a distclean and
manually erase the qtopia directory in rpm/BUILD if it
exists.

thanks,
Kevin


> -----Original Message-----
> Subject: RE: [Ltib] Qtopia 2
> 
> Hi Paolo,
> 
> I faced the same problem when I tried to build Qtopia for the PHY3250. No
> binaries are created even if the build is successfull... I only get the
> fonts folder.
> 
> I also have some problems building the more recent version of Qtopia.
> 
> Regards, Pierre-Luc
> 
> Objet : Re: [Ltib] Qtopia 2
> 
> Hi Paolo,
> 
> It depends on platform, but that looks reasonable.  For the imx27 I
> have:  rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
> 
> An extract of the output for the rpm query is:
> $ rpm --root `pwd`/rootfs -ql qtopia
> 
> //etc
> //etc/firstuse
> //etc/rc.d
> //etc/rc.d/init.d
> //etc/rc.d/init.d/qtopia
> //opt
> //opt/Qtopia
> //opt/Qtopia/apps
> //opt/Qtopia/apps/Applications
> //opt/Qtopia/apps/Applications/.directory
> //opt/Qtopia/apps/Applications/addressbook.desktop
> //opt/Qtopia/apps/Applications/calculator.desktop
> .....
> //opt/Qtopia/bin
> //opt/Qtopia/bin/addressbook
> //opt/Qtopia/bin/appearance
> //opt/Qtopia/bin/appservices
> //opt/Qtopia/bin/buttoneditor
> //opt/Qtopia/bin/calculator
> //opt/Qtopia/bin/camera
> //opt/Qtopia/bin/clock
> //opt/Qtopia/bin/datebook
> //opt/Qtopia/bin/embeddedkonsole
> ....
> 
> I suspect you have build errors.  The qtopia build is nasty and so can
> fail undetected.
> 
> NOTE: I don't have either your platform or the imx27 so cannot test the
> actual rpm.
> 
> Regards, Stuart
> 
> Paolo Cremonese wrote:
> > Hi Stuart,
> > I'm sorry, but it does not change.
> > the rpm is
> >
> > 'pwd'/rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
> >
> > is it correct?
> >
> > Best Regards,
> > Paolo
> >
> > On lun, 2009-12-14 at 08:45 +0000, Stuart Hughes wrote:
> >> Hi Paolo,
> >>
> >> Make sure you have it enabled properly in the config system (./ltib -m
> >> config).  If it is, try force rebuilding with:
> >> ./ltib -p qtopia -f
> >>
> >> Regards, Stuart
> >>
> >> Paolo Cremonese wrote:
> >>> Hi Stuart,
> >>> You are right.
> >>> I follow your suggestion, and my rpm seems contains only fonts.
> >>>
> >>> How can I get the right one?
> >>>
> >>> Best regards,
> >>> Paolo
> >>>
> >>> On ven, 2009-12-11 at 16:54 +0000, Stuart Hughes wrote:
> >>>> Hi Paolo,
> >>>>
> >>>> Check the rpm has built and installed correctly:
> >>>>
> >>>> $ rpm --root `pwd`/rootfs -ql qtopia
> >>>>
> >>>> This will list the installed files/directories for that package.
> >>>>
> >>>> Regards, Stuart
> >>>>
> >>>> Paolo Cremonese wrote:
> >>>>> Hi All,
> >>>>> I have configured my image (phy3250) with Qtopia 2 package:
> >>>>> The image building is successfully, but on running the following
> message
> >>>>> is printed on the console:
> >>>>>
> >>>>> /etc/rc.d/init.d/qtopia: line 55: cd: /opt/Qtopia/bin: No such file
> or
> >>>>> directory
> >>>>>
> >>>>> In fact, in the /opt/Qtopia theare isn't any bin dir, only a lib dir
> >>>>> containing fonts.
> >>>>>
> >>>>> Any suggestion?
> >>>>>
> >>>>> Thanks in advance,
> >>>>> Paolo
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> LTIB home page: http://ltib.org
> >>>>>
> >>>>> Ltib mailing list
> >>>>> address@hidden
> >>>>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>>>
> >>>
> >
> >
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib