Re: [Ltib] Qtopia 2

[Paolo Cremonese]

Hi Stuart,
I'm sorry, but it does not change.
the rpm is

'pwd'/rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm

is it correct?

Best Regards,
Paolo

On lun, 2009-12-14 at 08:45 +0000, Stuart Hughes wrote:
> Hi Paolo,
> 
> Make sure you have it enabled properly in the config system (./ltib -m 
> config).  If it is, try force rebuilding with:
> ./ltib -p qtopia -f
> 
> Regards, Stuart
> 
> Paolo Cremonese wrote:
> > Hi Stuart,
> > You are right.
> > I follow your suggestion, and my rpm seems contains only fonts.
> > 
> > How can I get the right one?
> > 
> > Best regards,
> > Paolo
> > 
> > On ven, 2009-12-11 at 16:54 +0000, Stuart Hughes wrote:
> >> Hi Paolo,
> >>
> >> Check the rpm has built and installed correctly:
> >>
> >> $ rpm --root `pwd`/rootfs -ql qtopia
> >>
> >> This will list the installed files/directories for that package.
> >>
> >> Regards, Stuart
> >>
> >> Paolo Cremonese wrote:
> >>> Hi All,
> >>> I have configured my image (phy3250) with Qtopia 2 package:
> >>> The image building is successfully, but on running the following message
> >>> is printed on the console:
> >>>
> >>> /etc/rc.d/init.d/qtopia: line 55: cd: /opt/Qtopia/bin: No such file or
> >>> directory
> >>>
> >>> In fact, in the /opt/Qtopia theare isn't any bin dir, only a lib dir
> >>> containing fonts.
> >>>
> >>> Any suggestion?
> >>>
> >>> Thanks in advance,
> >>> Paolo
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> LTIB home page: http://ltib.org
> >>>
> >>> Ltib mailing list
> >>> address@hidden
> >>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>
> > 
> >