RE: [Ltib] Building xorg-server; missing dependencies?

[Stuart Hughes]

Hi Alex,

You're on the wrong track here I think.  You should not need to do this.

Anything under rpm/BUILD is not under CVS and so is generated.  If this
build is failing, removed rpm/BUILD/_failed_package_ and then re-try.

If that doesn't work please post the LTIB output.  I need to know the
command you ran, which LTIB (Savannah?) and also which configuration
you're using (cat .config and then send me
config/platform/_target_/.config)

Regards, Stuart

On Wed, 2009-02-25 at 09:27 -0500, Alexandre Paradis wrote:
> OK, I fixed it by replacing the config.sub and config.guess from 
> http://cvs.savannah.gnu.org/viewvc/~checkout~/config/config/
> 
> I replaced them in the /home/alex/savannah/ltib/rpm/BUILD/jpeg-6b then re-ran 
> ./ltib
> 
> Is this something that would need to be added to the GPP package?
> 
> --
> Alex
> 
> -----Original Message-----
> From: address@hidden [mailto:address@hidden On Behalf Of Alexandre Paradis
> Sent: February 25, 2009 9:01 AM
> To: Stuart Hughes
> Cc: address@hidden
> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> 
> Hi Stuart,
> 
> libjpeg failed to build:
> 
> /// OUTPUT ///
> checking host system type... ./config.guess: line 618: ./dummy: cannot 
> execute binary file
> ./config.guess: line 848: ./dummy: cannot execute binary file
> ltconfig: cannot guess host type; you must specify one Try `ltconfig --help' 
> for more information.
> checking libjpeg version number... 62
> creating ./config.status
> creating Makefile
> creating jconfig.h
> + export 
> + PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
> + nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
> + ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
> + :/usr/bin/X11:/usr/X11R6/bin 
> + PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
> + nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
> + ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
> + :/usr/bin/X11:/usr/X11R6/bin
> + make
> ./libtool --mode=compile gcc -O2  -I. -c ./jcapimin.c
> make: ./libtool: Command not found
> make: *** [jcapimin.lo] Error 127
> error: Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.15054 
> (%build)
> 
> 
> RPM build errors:
>     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build) 
> Build time for libjpeg: 2 seconds /// END OUTPUT ///
> 
> 
> I do have libtool installed on my system, but it seems it's trying to run it 
> from the local folder? (./libtool)
> 
> 
> --
> Alex
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden
> Sent: February 25, 2009 4:00 AM
> To: Alexandre Paradis
> Cc: address@hidden
> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> 
> Hi Alex,
> 
> cross-gdb/gdbserver should also build.  If you want those later we can try to 
> debug what is wrong.
> 
> Regards, Stuart
> 
> On Tue, 2009-02-24 at 16:44 -0500, Alexandre Paradis wrote:
> > I think I just selected the wrong gdb package in the list.
> > 
> > I'm rebuilding with the native gdb package instead (without cross-gdb 
> > and gdbserver), and it didn't stop this time, so you can ignore my 
> > last question ;)
> > 
> > --
> > Alex
> > 
> > -----Original Message-----
> > From: address@hidden 
> > [mailto:address@hidden On Behalf Of 
> > Alexandre Paradis
> > Sent: February 24, 2009 4:14 PM
> > To: Stuart Hughes
> > Cc: address@hidden
> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > 
> > Hi Stuart,
> > 
> > Things are moving along.. ;)
> > 
> > Going forth with option #2, I performed the following as per your 
> > advice
> > 
> > 1. Checkout the current CVS
> > 2. Copied the MPC5121 configs from the old BSP to the latest version 
> > 3. Configured my packages (the build process failed before I did the 
> > next step) 4. ** Copied the *mpc5121*.spec files for u-boot and the 
> > kernel from my old BSP to the latest dist/lfs/ folders
> > 
> > I re-started the build process, and everything seemed to work, except when 
> > it got to the GDB package.
> > 
> > It's complaining that it can't execute compiled binaries (obviously since 
> > we're cross-compiling), and says that I should add the "--host" flag:
> >     
> >     checking whether the C compiler works... configure: error: cannot run C 
> > compiled programs.
> >     If you meant to cross compile, use `--host'.
> >     See `config.log' for more details.
> >     error: Bad exit status from 
> > /home/alex/savannah/ltib/tmp/rpm-tmp.74257 (%build)
> > 
> > While I don’t necessarily *need* GDB, it'd be nice to have it.  Where would 
> > I add this flag?
> > 
> > Thanks a lot for your help!
> > 
> > --
> > Alex
> > 
> > 
> > -----Original Message-----
> > From: Stuart Hughes [mailto:address@hidden
> > Sent: February 23, 2009 10:22 AM
> > To: Alexandre Paradis
> > Cc: address@hidden
> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > 
> > Hi Alex,
> > 
> > If you go for option 2:
> > 
> > * checkout Savannah CVS
> > * do a cp -a old_bsp/config/platform/mpc5121ads 
> > savannah/config/platform/
> > * cd  savannah
> > * ./ltib
> > * select mpc5121ads
> > * let it build the default and check it works for you
> > * ./ltib -m config
> > * select the X11 stuff
> > * ./ltib
> > * let it build
> > 
> > The Savannah copy has nothing pre-built, so in effect you are starting from 
> > clean.
> > 
> > If you want your old BSP back to it's original pristine state you can do 
> > (in old_bsp):
> > ./ltib --preconfig config/platform/mpc5121ads/defconfig
> > 
> > Regards, Stuart
> > 
> > On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
> > > The BSP is dated 2008-12-08, which seems to be the latest version they 
> > > have.
> > > 
> > > I'll go for option #2.
> > > 
> > > Should I clean everything since I already added packages using the wrong 
> > > commands?
> > > 
> > > --
> > > Alex
> > > 
> > > 
> > > 
> > > -----Original Message-----
> > > From: Stuart Hughes [mailto:address@hidden
> > > Sent: February 23, 2009 9:31 AM
> > > To: Alexandre Paradis
> > > Cc: address@hidden
> > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > 
> > > Hi Alex,
> > > 
> > > I guess you're using an older Freescale BSP?
> > > 
> > > If so your best bet is to try this:
> > > 
> > > 1/ Ask Freescale if they have a later BSP (the X11 stuff went in 
> > > around Nov/Dec last year IIRC).
> > > 
> > > 2/ If not, use the Savannah LTIB CVS and copy the
> > > config/platform/mpc5121 you have into that copy.  I can't guarantee 
> > > this will work, but at least you'll see the X11 selections.
> > > 
> > > Regards, Stuart
> > > 
> > > On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis wrote:
> > > > Hi Stuart,
> > > > 
> > > > I can't find X11 in the package list.  Would I need to update ltib for 
> > > > them to show up?
> > > > 
> > > > Thanks,
> > > > 
> > > > --
> > > > Alex
> > > > 
> > > > 
> > > > 
> > > > -----Original Message-----
> > > > From: Stuart Hughes [mailto:address@hidden
> > > > Sent: February 23, 2009 3:52 AM
> > > > To: Alexandre Paradis
> > > > Cc: address@hidden
> > > > Subject: Re: [Ltib] Building xorg-server; missing dependencies?
> > > > 
> > > > Hi Alex,
> > > > 
> > > > That's the wrong way to add packages.  Run:
> > > > 
> > > > $ ./ltib -m config
> > > > 
> > > > Select:
> > > > 
> > > >     X11  --->
> > > >     Install X11 (X.Org 7.3)  --->
> > > > 
> > > > And all the packages needed will be turned on.  You probably want 
> > > > to also select some kind of window manager (enlightenment maybe).  
> > > > Once done, save an exit then run:
> > > > 
> > > > $ ./ltib
> > > > 
> > > > NOTE: ./ltib -p <pkg> is normally only used if you're developing a 
> > > > single package.  See the FAQ.
> > > > 
> > > > Regards, Stuart
> > > > 
> > > > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis wrote:
> > > > > Hi,
> > > > > 
> > > > > I need to build the xorg-server package, but I seem to be 
> > > > > missing some needed packages.
> > > > > 
> > > > > I'm currently using LTIB from a Freescale BSP for the MPC5121:
> > > > > 
> > > > >       address@hidden
> > > > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ cat 
> > > > > ../../RELEASE_INFO
> > > > >       Release date = Fri Feb 20 20:20:58 2009 UTC
> > > > >       Release user = alex
> > > > >       Release host = dev-station
> > > > >       Release dir  = /home/alex/ltib/ltib-mpc5121ads-20081208
> > > > >       CVS wtag     = none
> > > > >       CVS tag      = none
> > > > >       Release tag  = none
> > > > >       App version  = 8.1.2
> > > > >       CVS version  = 1.421.4.1
> > > > >       git version  = none
> > > > > 
> > > > > I successfully added the some dependent packages using the 
> > > > > following
> > > > > commands:
> > > > > 
> > > > >       ./ltib -p pixman.spec
> > > > >       ./ltib -p randrproto.spec
> > > > >       ./ltib -p renderproto.spec
> > > > >       ./ltib -p fixesproto.spec
> > > > >       ./ltib -p damageproto.spec
> > > > >       ./ltib -p xcmiscproto.spec
> > > > >       ./ltib -p extproto.spec
> > > > >       ./ltib -p xproto.spec
> > > > >       ./ltib -p xtrans.spec
> > > > >       ./ltib -p scrnsaverproto.spec
> > > > >       ./ltib -p bigreqsproto.spec
> > > > >       ./ltib -p resourceproto.spec
> > > > >       ./ltib -p fontsproto.spec
> > > > >       ./ltib -p inputproto.spec
> > > > >       ./ltib -p kbproto.spec
> > > > >       ./ltib -p videoproto.spec
> > > > >       ./ltib -p compositeproto.spec
> > > > >       ./ltib -p recordproto.spec
> > > > >       ./ltib -p resourceproto.spec
> > > > > 
> > > > > However.. I'm still missing a couple of packages which I can't 
> > > > > seem to find on the GPP, mainly 'xkbfile', 'xfont', 'xau' and 
> > > > > 'fontenc'.
> > > > > 
> > > > > Where can I find these? Do I need to get them from a source 
> > > > > tarball, and create my own package along with a .spec file?
> > > > > 
> > > > > Any help is greatly appreciated.
> > > > > 
> > > > > Thanks!
> > > > > 
> > > > > --
> > > > > Alexandre Paradis
> > > > > 
> > > > > Alexandre Paradis, Technology Architect / Architecte 
> > > > > technologique
> > > > > 
> > > > > bluberi gaming technologies inc.
> > > > > Drummondville, Quebec  Canada
> > > > > 819.475.5155 (telephone) 819.475.5156 (fax) bluberi.com
> > > > >  
> > > > > ----------------------------------------------------------------
> > > > > --
> > > > > -------- This e-mail and any attachments transmitted with it are 
> > > > > personal, privileged and confidential and solely for the use of the 
> > > > > individual to whom they are addressed and intended. If you have 
> > > > > received this e-mail in error, please notify the sender by return 
> > > > > e-mail. If you are not the intended recipient or if you believe that 
> > > > > you are not, you are hereby notified that the dissemination, 
> > > > > distribution, plagiarism or copying of this e-mail and attachments 
> > > > > transmitted with it is strictly prohibited. NOTICE: We have taken 
> > > > > reasonable precautions to prevent viruses from being present in this 
> > > > > e-mail. We do not accept responsibility for any loss or damage 
> > > > > arising from the use of this e-mail or attachments.
> > > > >  
> > > > > Ce courriel et les pièces jointes s’y rattachant sont de nature 
> > > > > personnelle, privilégiée et confidentielle et pour l’usage exclusif 
> > > > > du destinataire à qui ils sont adressés et destinés. Si vous avez 
> > > > > reçu ce courriel par erreur, veuillez s’il vous plaît le renvoyer à 
> > > > > l’expéditeur. Si vous n’êtes pas le bon destinataire ou si vous 
> > > > > croyez ne pas l’être, nous vous informons immédiatement que la 
> > > > > publication, distribution, diffusion, copie ou plagiat de ce courriel 
> > > > > et de ses pièces jointes sont strictement interdits. AVERTISSEMENT : 
> > > > > Nous avons pris des mesures raisonnables afin de prévenir toute 
> > > > > propagation de virus par le biais de ce courriel. Nous n’accepterons 
> > > > > donc aucune responsabilité pour des dommages ou pertes provenant de 
> > > > > l’utilisation de ce courriel ou de ses pièces jointes.
> > > > > ----------------------------------------------------------------
> > > > > --
> > > > > --------
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > LTIB home page: http://bitshrine.org
> > > > > 
> > > > > Ltib mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > 
> > > > 
> > > 
> > 
>