Re: [Ltib] Trouble adding new package in LTIB

[Stuart Hughes]

Hi James,

Unfortunately I don't think readline is so small.  It's in ltib, so try
manually selecting it and have it build before the parted package.  Take
a look at the size of the (significant) parts of it and decided if you
can tolerate the footprint.  If not, you might be able to configure
without readline, you'll need to check the package to see (./configure
--help).

Regards, Stuart

On Mon, 2008-08-18 at 10:50 -0700, James E. Chargin Jr. wrote:
> Stuart,
> 
> Thanks for the information. My concern was with the size of termcap. 
> Since you feel it is small, I have no objection to including it.
> 
> I did try adding --without-readline to the configure command line. This 
> resulted in compile errors during the build of parted. I was in the 
> midst of working on resolving these when your suggestion arrived and so 
> I've decided to try it rather than having to end up modifying the source 
> for parted to fix some implicit function declaration errors.
> 
> So, I've added "select PKG_TERMCAP" to packages.lkc. I've removed 
> --without-readline from the configure command for parted. I've also made 
> sure termcap is selected in LTIB.
> 
> Now, when I try to build parted, it has found termcap, but it is now 
> looking for "GNU readline". Here is the output:
> 
> 8--
> checking for readline in -lreadline... no
> configure: error: GNU Readline could not be found which is required for 
> the --with-readline (which is enabled by default).  Either disable 
> readline support with --without-readline or downloaded and install it from:
>          ftp.gnu.org/gnu/readline
> Note: if you are using precompiled packages you will also need the 
> development
> package as well (which may be called readline-devel or something similar).
> error: Bad exit status from 
> /home/jimc/b/ltib/ltib-mpc8315erdb-20071129/tmp/rpm-tmp.79834 (%build)
> 
> RPM build errors:
>      Bad exit status from 
> /home/jimc/b/ltib/ltib-mpc8315erdb-20071129/tmp/rpm-tmp.79834 (%build)
> Build time for parted: 11 seconds
> 
> Failed building parted
> 
> 
> f_buildrpms() returned an error, exiting
> 
> Started: Mon Aug 18 10:17:20 2008
> Ended:   Mon Aug 18 10:19:05 2008
> Elapsed: 105 seconds
> 
> These packages failed to build:
> parted
> Build Failed
> 
> Exiting on error or interrupt
> 8--
> 
> I have found evidence that there is already a readline in ltib. 
> dist/lfs-5.1/readline/readline.spec exists (It list you as the Packager).
> 
> So now, what? Is there a way to have parted use the existing readline? 
> Should I install GNU readline, and if so, how is this best done without 
> disturbing the existing readline?
> 
> Any thoughts?
> 
> Thanks,
> Jim
> 
> 
> Stuart Hughes wrote:
> > Hi Jim,
> > 
> > Although that will do the trick, I would try without: --without-readline
> > To get termcap in your system, run ./ltib -m config and add it (you can
> > search by pressing the 's' key).  Termcap is a fairly small package and
> > is normally included in most systems (even small ones).
> > 
> > If you decide this is what you want, you can enforce this selection by
> > adding the clause:
> > 
> >    select PKG_TERMCAP
> > 
> > to the entry you put for your package in packages.lkc.  Take a look at
> > some other packages for examples.
> > 
> > Regards, Stuart
> > 
> > On Fri, 2008-08-15 at 13:34 -0700, James E. Chargin Jr. wrote:
> >> Luis,
> >>
> >> That did the trick, thanks.
> >>
> >> I'll attempt to solve my next problems (compiler errors) without asking 
> >> for help for a while, to avoid asking another question with an obvious 
> >> answer.
> >>
> >> Thanks again,
> >> Jim
> >>
> >>
> >>
> >> Luis Felipe Strano Moraes wrote:
> >>> 2008/8/15 James E. Chargin Jr. <address@hidden>:
> >>>> Thanks for the detailed explanation.
> >>>>
> >>>> I have added the md5 as Peter suggested.
> >>>> I have also "activated" the package via LTIB. On exit from LTIB, I get
> >>>> output from rpmbuild. During this, I get the message (which I mentioned
> >>>> previously):
> >>>>
> >>>> 8--
> >>>> configure: error: termcap could not be found which is required for the
> >>>> --with-readline option (which is enabled by default).  Either disable
> >>>> readline support with --without-readline or download and install termcap
> >>>> from:
> >>>>        ftp.gnu.org/gnu/termcap
> >>>> Note: if you are using precompiled packages you will also need the
> >>>> development package as well (which may be called termcap-devel or 
> >>>> something
> >>>> similar).
> >>>> Note: (n)curses also seems to work as a substitute for termcap.  This was
> >>>> not found either - but you could try installing that as well.
> >>>> --8
> >>>>
> >>>> As I indicated, I need help with this. I would prefer (I think) to build
> >>>> without termcap, rather than include it on my embedded system, but I 
> >>>> don't
> >>>> know where I would specify --without-readline.  I know this would be a
> >>>> command line parameter for configure, but I don't know where that command
> >>>> line is generated.
> >>>>
> >>> Inside the .spec file, on the %Build stage.
> >>>
> >>> --lf
> >>>
> >>>> Could someone provide guidance?
> >>>>
> >>>> Thank you very much,
> >>>> Jim
> >>>>
> >>>>
> >>>> Stuart Hughes wrote:
> >>>>> On Thu, 2008-08-14 at 15:02 -0400, Peter Barada wrote:
> >>>>>> On Thu, 2008-08-14 at 09:07 -0700, James E. Chargin Jr. wrote:
> >>>>>>> Processing: parted
> >>>>>>> ====================
> >>>>>>> Testing network connectivity
> >>>>>>> Testing proxy connection for GPP : FAIL
> >>>>>>> response was: 500 Can't connect to wwwgate0.freescale.net:1080 (Bad
> >>>>>>> hostname 'wwwgate0.freescale.net')
> >>>>>>> Can't get gpp index, proxy forced off
> >>>>>>> FAILED PPP: : 500 Can't connect to auslxsc01.mtwk.freescale.net:80 
> >>>>>>> (Bad
> >>>>>>> hostname 'auslxsc01.mtwk.freescale.net')
> >>>>>>> OK GPP:
> >>>>>>>
> >>>>>>> FAILED GPP: parted-1.8.8.tar.bz2.md5: 404 Not Found
> >>>>>>> WARN: skipping md5sum check for
> >>>>>>> /opt/freescale/pkgs/parted-1.8.8.tar.bz2, md5 file was not found
> >>>>>> When you add a new package to the system, add a md5sum file to
> >>>>>> /opt/freescale/pkgs:
> >>>>>>
> >>>>>> $ pushd /opt/freescale/pkgs
> >>>>>> $ md5sum parted-1.8.8.tar.bz2 > parted-1.8.8.tar.bz2.md5
> >>>>> The .md5sum file will be created if/when you eventually upload the 
> >>>>> content
> >>>>> to the GPP.  However until then this a good thing to do aswell.
> >>>>>
> >>>>>> LTIB looks for the .md5 to be sure that what you have is not corrupt, 
> >>>>>> and
> >>>>>> if it doesn't find the .md5 in /opt/freescale/pkgs/ it looks int the 
> >>>>>> Global
> >>>>>> Package Pool and Private Package Pool.  The global pool is in
> >>>>>> www.bitshrine.org/gpp, <http://www.bitshrine.org/gpp,> but hte provate 
> >>>>>> pool
> >>>>>> is in Freescale (your BSP came from them), which can't be seen by your
> >>>>>> machine since you're outside Freescale's network.  It would be nice if
> >>>>>> Freescale would disable the Provate Package Pool on .iso BSPs they 
> >>>>>> release
> >>>>>> to remove this problem.
> >>>>>>
> >>>>> On later BSPs the PPP references are scrubbed.  These messages can be
> >>>>> ignored, but if they're nuisance, edit .ltibrc and delete the entry for 
> >>>>> the
> >>>>> ppp.
> >>>>>
> >>>>> Regards, Stuart
> >>>> _______________________________________________
> >>>> LTIB home page: http://bitshrine.org
> >>>>
> >>>> Ltib mailing list
> >>>> address@hidden
> >>>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>>
> >>>
> >>>
> >>
> >> _______________________________________________
> >> LTIB home page: http://bitshrine.org
> >>
> >> Ltib mailing list
> >> address@hidden
> >> http://lists.nongnu.org/mailman/listinfo/ltib
> > 
> >