gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Odp: Nokia 6310i + gnokii 0.4.3


From: C J Kenneth Tan -- Heuchera Technologies
Subject: Re: Odp: Nokia 6310i + gnokii 0.4.3
Date: Mon, 16 Dec 2002 15:27:50 +0000 (UTC)

Pavel,

Thanks for your message!  I managed to get it to work now.  Connecting
to /dev/ircomm0 worked.


Ken
-----------------------------------------------------------------------
C. J. Kenneth Tan, Ph.D.
Heuchera Technologies
Telephone: +44 798 941 7838    E-mail: address@hidden
Telephone:  +1 519 694 2581       Web: http://www.OptimaNumerics.com
-----------------------------------------------------------------------
This e-mail (and any attachments) is confidential and privileged.  It
is intended only for the addressee(s) stated above.  If you are not an
addressee, please accept my apologies and please do not use,
disseminate, disclose, copy, publish or distribute information in this
e-mail nor take any action through knowledge of its contents: to do so
is strictly prohibited and may be unlawful.  Please inform me that
this e-mail has gone astray, and delete this e-mail from your system.
Thank you for your co-operation.
-----------------------------------------------------------------------




On Mon, 16 Dec 2002, Pawel Kot wrote:

> Date: Mon, 16 Dec 2002 10:06:38 +0100
> From: Pawel Kot <address@hidden>
> Reply-To: Discussion forum for gnokii users. <address@hidden>
> To: address@hidden
> Subject: Odp: Nokia 6310i + gnokii 0.4.3
>
> >>> address@hidden 15 Grudzieđ» 2002 21:00:01 >>>
> > I am trying to get my Nokia 6310i to work with gnokii 0.4.3.  I am
>
> Don't use gnokii 0.4.3. Later versions have many fixes.
>
> > able to talk to the phone using xgnokii, and I am able to send SMS
> > out.  But I am not able to use it as a modem to dial up to an ISP.
> If
>
> You don't need gnokii to dial up. You even don't want it.
>
> > I set model to "6310i", gnokii can connect to the phone.  But if I
> > were to set model to "AT", I get the following:
>
> > kolmogorov gnokii/bin# ./gnokii --monitor
>
> I belive we don't have --monitor implemented for AT driver. What about
> gnokii --identify in such configuration?
>
> > Adding key/value port//dev/ttyS1
>
> Are you sure this is correct port for the irda communication?
> What about /dev/ircomm0?
>
> > If I set model to "6310i" and I try to dial up using pppd, I get the
> > message saying "no carrier" in /var/log/messages.
>
> Don't use gnokii for that. Gnokii is not capable doing this at all. I
> even
> can't imagine how you would use gnokii and pppd. There's a possibility
> to use gnokiid as the software modem emulation but there's no sense
> in doing this -- Nokia 6310i has built in modem and accepts AT
> commands.
>
> pkot
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/gnokii-users
>





reply via email to

[Prev in Thread] Current Thread [Next in Thread]