Re: [Discuss-gnuradio] Rx dBoard has empty serial

[sirjanselot]

Hello,

I reran the command for each individual USRP radio connected.

Two of my USRP N210s have this output:

Error: RX dboard has empty serial!

One of my USRP N210 has this output:
Error: timed out waiting for TX and/or RX LO to lock

and the USRP1:

Error: self-calibration is not supported for this hardware.

I can understand if the self-calibration is not supported for the USRP1.

However, for the USRP N210s I would like these fixed.  I ran uhd_usrp_probe
and it seems like by dboard has a serial.  It says TX Dboard: A ID:
WBX(0x0052).

Is there a bug in the calibration routines?


Marcus D. Leech wrote:
> 
>   
> 
> When you have more than one USRP device connected to your system,
> you really should be explicit about which device you want to address,
> using the "--args" option. 
> 
> For your N210 it would be "--args
> addr=192.168.X.Y" and for your USRP1 it would be "type=usrp1"
> 
> 
> Otherwise, it just grabs the first USRP device it finds. 
> 
> On Mon, 19
> Mar 2012 07:47:03 -0700 (PDT), sirjanselot wrote: 
> 
>> Hello,
>> 
>> I was
> running the calibration routines for 3 USRP N210s and one 1 USRP
>>
> radio. I had them all connected at once to my computer and all of a
> sudden
>> it says Error: RX dboard has empty serial!
>> 
>> How do I know
> which board has an empty serial and how do I fix this?
>> 
>> Does the
> calibration routines run for all of them @ once, when I call the
>>
> program?
>> 
>> - Jan
> 
>   
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 

-- 
View this message in context: 
http://old.nabble.com/Rx-dBoard-has-empty-serial-tp33532071p33532548.html
Sent from the GnuRadio mailing list archive at Nabble.com.