Re: [Discuss-gnuradio] build error

[Achilleas Anastasopoulos]

yes, i can run all the tests in the different example directories.

However i cannot find/run  grc

Achilleas

On Sun, Oct 24, 2010 at 11:08 AM, Tom Rondeau <address@hidden> wrote:
> On Sun, Oct 24, 2010 at 10:48 AM, Achilleas Anastasopoulos
> <address@hidden> wrote:
>> I am trying a new build from the source tree on fedora 12.
>> Configure gives the result shown at the end of the email.
>> Make and make check complete fine, but sudo make install
>> completes with the message:
>> *** Post-Install Message ***
>> Warning: python could not find the gnuradio module.
>> Make sure that /usr/local/lib64/python2.6/site-packages is in your PYTHONPATH
>>
>> make[3]: Leaving directory `/home/anastas/gnuradio_trunk'
>> make[2]: Leaving directory `/home/anastas/gnuradio_trunk'
>> make[1]: Leaving directory `/home/anastas/gnuradio_trunk
>>
>> I know the PYTHONPATH is set appropriately, since I can import gnuradio
>> from within python...
>
> If you can import gnuradio, can you also run GNU Radio applications?
> This might be a misunderstanding during the install but not an actual
> problem.
>
> Tom
>
>
>
>> Also grc is not installed in /usr/local/bin
>>
>> Any ideas,
>> Achilleas
>>
>>
>>
>>
>> '*********************************************************************
>> The following components were skipped either because you asked not
>> to build them or they didn't pass configuration checks:
>>
>> usrp2-firmware
>>
>> These components will not be built.
>>
>>
>> *********************************************************************
>> The following GNU Radio components have been successfully configured:
>>
>> config
>> gruel
>> gnuradio-core
>> usrp
>> usrp2
>> gr-usrp
>> gr-usrp2
>> gr-msdd6000
>> gr-audio-alsa
>> gr-audio-oss
>> gr-atsc
>> gr-cvsd-vocoder
>> gr-gpio
>> gr-gsm-fr-vocoder
>> gr-noaa
>> gr-pager
>> gr-radar-mono
>> gr-radio-astronomy
>> gr-trellis
>> gr-video-sdl
>> gr-wxgui
>> gr-qtgui
>> gr-sounder
>> gr-utils
>> gnuradio-examples
>> grc
>> docs
>>
>> You my now run the make command to build these components.
>>
>> *********************************************************************
>> The following components were skipped either because you asked not
>> to build them or they didn't pass configuration checks:
>>
>> gcell
>> gr-gcell
>> gr-audio-jack
>> gr-audio-osx
>> gr-audio-portaudio
>> gr-audio-windows
>> gr-comedi
>>
>> These components will not be built.
>>
>> Configured GNU Radio release v3.3.1git-92-gdd74b98a for build.
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>