Re: [Discuss-gnuradio] build error

[Tom Rondeau]

On Sun, Oct 24, 2010 at 10:48 AM, Achilleas Anastasopoulos
<address@hidden> wrote:
> I am trying a new build from the source tree on fedora 12.
> Configure gives the result shown at the end of the email.
> Make and make check complete fine, but sudo make install
> completes with the message:
> *** Post-Install Message ***
> Warning: python could not find the gnuradio module.
> Make sure that /usr/local/lib64/python2.6/site-packages is in your PYTHONPATH
>
> make[3]: Leaving directory `/home/anastas/gnuradio_trunk'
> make[2]: Leaving directory `/home/anastas/gnuradio_trunk'
> make[1]: Leaving directory `/home/anastas/gnuradio_trunk
>
> I know the PYTHONPATH is set appropriately, since I can import gnuradio
> from within python...

If you can import gnuradio, can you also run GNU Radio applications?
This might be a misunderstanding during the install but not an actual
problem.

Tom



> Also grc is not installed in /usr/local/bin
>
> Any ideas,
> Achilleas
>
>
>
>
> '*********************************************************************
> The following components were skipped either because you asked not
> to build them or they didn't pass configuration checks:
>
> usrp2-firmware
>
> These components will not be built.
>
>
> *********************************************************************
> The following GNU Radio components have been successfully configured:
>
> config
> gruel
> gnuradio-core
> usrp
> usrp2
> gr-usrp
> gr-usrp2
> gr-msdd6000
> gr-audio-alsa
> gr-audio-oss
> gr-atsc
> gr-cvsd-vocoder
> gr-gpio
> gr-gsm-fr-vocoder
> gr-noaa
> gr-pager
> gr-radar-mono
> gr-radio-astronomy
> gr-trellis
> gr-video-sdl
> gr-wxgui
> gr-qtgui
> gr-sounder
> gr-utils
> gnuradio-examples
> grc
> docs
>
> You my now run the make command to build these components.
>
> *********************************************************************
> The following components were skipped either because you asked not
> to build them or they didn't pass configuration checks:
>
> gcell
> gr-gcell
> gr-audio-jack
> gr-audio-osx
> gr-audio-portaudio
> gr-audio-windows
> gr-comedi
>
> These components will not be built.
>
> Configured GNU Radio release v3.3.1git-92-gdd74b98a for build.
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>