[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] SDR platform other than usrp with gnuradio
From: |
Anand Prabhu Subramanian |
Subject: |
[Discuss-gnuradio] SDR platform other than usrp with gnuradio |
Date: |
Fri, 18 Jul 2008 16:52:13 -0400 (EDT) |
Hello,
I am currently working on a custom made SDR platform and trying to use gnu
radio to program it. I understand that I need to write seperate source and
sink blocks to receive and send I/Q samples from and to the device. I was
wondering if anybody in the list could help me in understanding how to
write these block. I suspect I would need to write something similar to
the usrp code. Can you please let me know a starting point on how to write
these blocks? The device I am currently using interfaces with the host
using ethernet and sends/receives base band I/Q samples.
Are there documentations on interfacing gnuradio to SDR platforms other
than usrp. It would be very helpful if you could give some pointers.
-Anand
============================================
Anand Prabhu Subramanian
Wireless Networking and Simulation Lab (WINGS)
State University of New York, Stony Brook
http://www.wings.cs.sunysb.edu/~anandps
- [Discuss-gnuradio] SDR platform other than usrp with gnuradio,
Anand Prabhu Subramanian <=