Re: [Qemu-ppc] [PATCHv2 5/7] spapr: Adjust placement of PCI host bridge to allow > 1TiB RAM

[David Gibson]

On Wed, Oct 12, 2016 at 02:06:10PM +0200, Laurent Vivier wrote:
> 
> 
> On 12/10/2016 12:55, David Gibson wrote:
> > On Wed, Oct 12, 2016 at 12:07:50PM +0200, Laurent Vivier wrote:
> >>
> >>
> >> On 12/10/2016 06:44, David Gibson wrote:
> >>> Currently the default PCI host bridge for the 'pseries' machine type is
> >>> constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
> >>> guest memory space.  This means that if > 1TiB of guest RAM is specified,
> >>> the RAM will collide with the PCI IO windows, causing serious problems.
> >>>
> >>> Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
> >>> there's a little unused space at the bottom of the area reserved for PCI,
> >>> but essentially this means that > 1TiB of RAM has never worked with the
> >>> pseries machine type.
> >>>
> >>> This patch fixes this by altering the placement of PHBs on large-RAM VMs.
> >>> Instead of always placing the first PHB at 1TiB, it is placed at the next
> >>> 1 TiB boundary after the maximum RAM address.
> >>>
> >>> Technically, this changes behaviour in a migration-breaking way for
> >>> existing machines with > 1TiB maximum memory, but since having > 1 TiB
> >>> memory was broken anyway, this seems like a reasonable trade-off.
> >>>
> >>> Signed-off-by: David Gibson <address@hidden>
> >>> ---
> >>>  hw/ppc/spapr.c | 12 ++++++++++--
> >>>  1 file changed, 10 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> >>> index f6e9c2a..7cb167c 100644
> >>> --- a/hw/ppc/spapr.c
> >>> +++ b/hw/ppc/spapr.c
> >>> @@ -2376,15 +2376,23 @@ static void spapr_phb_placement(sPAPRMachineState 
> >>> *spapr, uint32_t index,
> >>>                                  unsigned n_dma, uint32_t *liobns, Error 
> >>> **errp)
> >>>  {
> >>>      const uint64_t base_buid = 0x800000020000000ULL;
> >>> -    const hwaddr phb0_base = 0x10000000000ULL; /* 1 TiB */
> >>>      const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
> >>>      const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
> >>>      const hwaddr pio_offset = 0x80000000; /* 2 GiB */
> >>>      const uint32_t max_index = 255;
> >>> +    const hwaddr phb0_alignment = 0x10000000000ULL; /* 1 TiB */
> >>>  
> >>> -    hwaddr phb_base;
> >>> +    uint64_t ram_top = MACHINE(spapr)->ram_size;
> >>> +    hwaddr phb0_base, phb_base;
> >>>      int i;
> >>>  
> >>> +    if (MACHINE(spapr)->maxram_size > ram_top) {
> >>> +        ram_top = spapr->hotplug_memory.base +
> >>> +            memory_region_size(&spapr->hotplug_memory.mr);
> >>> +    }
> >>
> >> Why don't you set directly ram_top to maxram_size?
> > 
> > Because there may be an alignment gap between ram_size and the bottom
> > of the hotplug region.
> 
> Perhaps you could add a comment why we have this check:
> 
> when machine->ram_size == machine->maxram_size, there is no hotpluggable
> memory.

Good idea, I've added something.

> BTW, something strange in hotpluggable memory in hw/ppc/spapr.c:
> 
>      /* initialize hotplug memory address space */
>      if (machine->ram_size < machine->maxram_size) {
>          ram_addr_t hotplug_mem_size = machine->maxram_size -
> machine->ram_size;
> ...
>          spapr->hotplug_memory.base = ROUND_UP(machine->ram_size,
>                                                SPAPR_HOTPLUG_MEM_ALIGN);
>          memory_region_init(&spapr->hotplug_memory.mr, OBJECT(spapr),
>                             "hotplug-memory", hotplug_mem_size);
> 
> So the end of hotpluggable memory can be beyond maxram_size, is that normal?

Yes.  maxram_size is the total possible amount of RAM not counting
gaps, rather than the maximum possible RAM address.

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature