Re: [Qemu-ppc] [PATCHv2 5/7] spapr: Adjust placement of PCI host bridge to allow > 1TiB RAM

[Laurent Vivier]

On 12/10/2016 12:55, David Gibson wrote:
> On Wed, Oct 12, 2016 at 12:07:50PM +0200, Laurent Vivier wrote:
>>
>>
>> On 12/10/2016 06:44, David Gibson wrote:
>>> Currently the default PCI host bridge for the 'pseries' machine type is
>>> constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
>>> guest memory space.  This means that if > 1TiB of guest RAM is specified,
>>> the RAM will collide with the PCI IO windows, causing serious problems.
>>>
>>> Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
>>> there's a little unused space at the bottom of the area reserved for PCI,
>>> but essentially this means that > 1TiB of RAM has never worked with the
>>> pseries machine type.
>>>
>>> This patch fixes this by altering the placement of PHBs on large-RAM VMs.
>>> Instead of always placing the first PHB at 1TiB, it is placed at the next
>>> 1 TiB boundary after the maximum RAM address.
>>>
>>> Technically, this changes behaviour in a migration-breaking way for
>>> existing machines with > 1TiB maximum memory, but since having > 1 TiB
>>> memory was broken anyway, this seems like a reasonable trade-off.
>>>
>>> Signed-off-by: David Gibson <address@hidden>
>>> ---
>>>  hw/ppc/spapr.c | 12 ++++++++++--
>>>  1 file changed, 10 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
>>> index f6e9c2a..7cb167c 100644
>>> --- a/hw/ppc/spapr.c
>>> +++ b/hw/ppc/spapr.c
>>> @@ -2376,15 +2376,23 @@ static void spapr_phb_placement(sPAPRMachineState 
>>> *spapr, uint32_t index,
>>>                                  unsigned n_dma, uint32_t *liobns, Error 
>>> **errp)
>>>  {
>>>      const uint64_t base_buid = 0x800000020000000ULL;
>>> -    const hwaddr phb0_base = 0x10000000000ULL; /* 1 TiB */
>>>      const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
>>>      const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
>>>      const hwaddr pio_offset = 0x80000000; /* 2 GiB */
>>>      const uint32_t max_index = 255;
>>> +    const hwaddr phb0_alignment = 0x10000000000ULL; /* 1 TiB */
>>>  
>>> -    hwaddr phb_base;
>>> +    uint64_t ram_top = MACHINE(spapr)->ram_size;
>>> +    hwaddr phb0_base, phb_base;
>>>      int i;
>>>  
>>> +    if (MACHINE(spapr)->maxram_size > ram_top) {
>>> +        ram_top = spapr->hotplug_memory.base +
>>> +            memory_region_size(&spapr->hotplug_memory.mr);
>>> +    }
>>
>> Why don't you set directly ram_top to maxram_size?
> 
> Because there may be an alignment gap between ram_size and the bottom
> of the hotplug region.

Perhaps you could add a comment why we have this check:

when machine->ram_size == machine->maxram_size, there is no hotpluggable
memory.

BTW, something strange in hotpluggable memory in hw/ppc/spapr.c:

     /* initialize hotplug memory address space */
     if (machine->ram_size < machine->maxram_size) {
         ram_addr_t hotplug_mem_size = machine->maxram_size -
machine->ram_size;
...
         spapr->hotplug_memory.base = ROUND_UP(machine->ram_size,
                                               SPAPR_HOTPLUG_MEM_ALIGN);
         memory_region_init(&spapr->hotplug_memory.mr, OBJECT(spapr),
                            "hotplug-memory", hotplug_mem_size);

So the end of hotpluggable memory can be beyond maxram_size, is that normal?

Thanks,
Laurent