[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v3 2/2] tests/avocado/tuxrun_baselines.py: improve code cover
From: |
Kautuk Consul |
Subject: |
Re: [PATCH v3 2/2] tests/avocado/tuxrun_baselines.py: improve code coverage for ppc64 |
Date: |
Fri, 21 Apr 2023 09:57:36 +0530 |
On 2023-04-21 09:23:52, Harsh Prateek Bora wrote:
>
>
> On 4/21/23 09:12, Kautuk Consul wrote:
> > Hi,
> >
> > On 2023-04-20 19:20:40, Harsh Prateek Bora wrote:
> > > Since we are optimising code a lot, one suggestion below:
> > >
> > >
> > > On Thu, Apr 20, 2023 at 6:23 PM Kautuk Consul <kconsul@linux.vnet.ibm.com>
> > > wrote:
> > >
> > > > Commit c0c8687ef0fd990db8db1655a8a6c5a5e35dd4bb disabled the
> > > > boot_linux.py test-case due to which the code coverage for ppc
> > > > decreased by around 2%. As per the discussion on
> > > > https://lore.kernel.org/qemu-devel/87sfdpqcy4.fsf@linaro.org/ it
> > > > was mentioned that the baseline test for ppc64 could be modified
> > > > to make up this 2% code coverage. This patch attempts to achieve
> > > > this 2% code coverage by adding various device command line
> > > > arguments (to ./qemu-system-ppc64) in the tuxrun_baselines.py
> > > > test-case.
> > > >
> > > > The code coverage report with boot_linux.py, without it and finally
> > > > with these tuxrun_baselines.py changes is as follows:
> > > >
> > > > With boot_linux.py
> > > > ------------------
> > > > lines......: 13.8% (58006 of 420997 lines)
> > > > functions..: 20.7% (7675 of 36993 functions)
> > > > branches...: 9.2% (22146 of 240611 branches)
> > > > Without boot_linux.py (without this patch changes)
> > > > --------------------------------------------------
> > > > lines......: 11.9% (50174 of 420997 lines)
> > > > functions..: 18.8% (6947 of 36993 functions)
> > > > branches...: 7.4% (17580 of 239017 branches)
> > > > Without boot_linux.py (with this patch changes)
> > > > -----------------------------------------------
> > > > lines......: 13.8% (58287 of 420997 lines)
> > > > functions..: 20.7% (7640 of 36993 functions)
> > > > branches...: 8.4% (20223 of 240611 branches)
> > > >
> > > > Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
> > > > Reported-by: Alex Bennée <alex.bennee@linaro.org>
> > > > ---
> > > > tests/avocado/tuxrun_baselines.py | 120 +++++++++++++++++++++++++++++-
> > > > 1 file changed, 116 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/tests/avocado/tuxrun_baselines.py
> > > > b/tests/avocado/tuxrun_baselines.py
> > > > index d343376faa..ae082ac028 100644
> > > > --- a/tests/avocado/tuxrun_baselines.py
> > > > +++ b/tests/avocado/tuxrun_baselines.py
> > > > @@ -11,6 +11,7 @@
> > > >
> > > > import os
> > > > import time
> > > > +import tempfile
> > > >
> > > > <snip>
> > > > """
> > > > - self.common_tuxrun(drive="scsi-hd")
> > > > +
> > > > + # add device args to command line.
> > > > + self.vm.add_args('-netdev', 'user,id=vnet,hostfwd=:127.0.0.1:0
> > > > -:22',
> > > > + '-device', 'virtio-net,netdev=vnet')
> > > > + self.vm.add_args('-netdev', '{"type":"user","id":"hostnet0"}',
> > > > + '-device',
> > > > '{"driver":"virtio-net-pci","netdev":'
> > > > +
> > > > '"hostnet0","id":"net0","mac":"52:54:00:4c:e3:86",'
> > > > + '"bus":"pci.0","addr":"0x9"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"qemu-xhci","p2":15,"p3":15,'
> > > > + '"id":"usb","bus":"pci.0","addr":"0x2"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"virtio-scsi-pci","id":"scsi0"'
> > > > + ',"bus":"pci.0","addr":"0x3"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"virtio-serial-pci","id":'
> > > > +
> > > > '"virtio-serial0","bus":"pci.0","addr":"0x4"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"scsi-cd","bus":"scsi0.0"'
> > > > +
> > > > ',"channel":0,"scsi-id":0,"lun":0,"device_id":'
> > > > + '"drive-scsi0-0-0-0","id":"scsi0-0-0-0"}')
> > > > + self.vm.add_args('-device', '{"driver":"virtio-balloon-pci",'
> > > > + '"id":"balloon0","bus":"pci.0","addr":"0x6"}')
> > > > + self.vm.add_args('-audiodev',
> > > > '{"id":"audio1","driver":"none"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"usb-tablet","id":"input0"'
> > > > + ',"bus":"usb.0","port":"1"}')
> > > > + self.vm.add_args('-device', '{"driver":"usb-kbd","id":"input1"'
> > > > + ',"bus":"usb.0","port":"2"}')
> > > > + self.vm.add_args('-device', '{"driver":"VGA","id":"video0",'
> > > > + '"vgamem_mb":16,"bus":"pci.0","addr":"0x7"}')
> > > > + self.vm.add_args('-object',
> > > > '{"qom-type":"rng-random","id":"objrng0"'
> > > > + ',"filename":"/dev/urandom"}',
> > > > + '-device',
> > > > '{"driver":"virtio-rng-pci","rng":"objrng0"'
> > > > + ',"id":"rng0","bus":"pci.0","addr":"0x8"}')
> > > > + self.vm.add_args('-object',
> > > > '{"qom-type":"cryptodev-backend-builtin",'
> > > > + '"id":"objcrypto0","queues":1}',
> > > > + '-device', '{"driver":"virtio-crypto-pci",'
> > > > +
> > > > '"cryptodev":"objcrypto0","id":"crypto0","bus"'
> > > > + ':"pci.0","addr":"0xa"}')
> > > > + self.vm.add_args('-device', '{"driver":"spapr-pci-host-bridge"'
> > > > + ',"index":1,"id":"pci.1"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"spapr-vscsi","id":"scsi1"'
> > > > + ',"reg":12288}')
> > > > + self.vm.add_args('-m', '2G,slots=32,maxmem=4G',
> > > > + '-object',
> > > > 'memory-backend-ram,id=ram1,size=1G',
> > > > + '-device', 'pc-dimm,id=dimm1,memdev=ram1')
> > > > +
> > > >
> > >
> > >
> > > Most of the above code for adding args is getting duplicated in the test
> > > for ppc64le below as well.
> > > It could be contained in a helper routine which could be called from both,
> > > and would be easier to maintain.
> > I kept it separate because there may be some future reason to make the
> > devices different for ppc and ppc64le. I know that probably won't happen
> > but thought to keep it separate to allow for that possibility.
> > Or if you feel that they should be exactly the same maybe I could send
> > another patch after this to refactor the code into a single routine ?
>
> We can keep a single routine if all the devices are exactly same for now.
> Whenever (or if now) there is a change in device needed, that can be
> conveyed to that routine via a flag for be/le and the routine can add
> additional devices based on the flag passed.
Sure. Made this change and sent a v4.
>
> > >
> > > regards,
> > > Harsh
> > >
> > > + # Create a temporary qcow2 and launch the test-case
> > > > + with tempfile.NamedTemporaryFile(prefix='tuxrun_ppc64_',
> > > > + suffix='.qcow2') as qcow2:
> > > > + process.run(self.qemu_img + ' create -f qcow2 ' +
> > > > + qcow2.name + ' 1G')
> > > > +
> > > > + self.vm.add_args('-drive', 'file=' + qcow2.name +
> > > > + ',format=qcow2,if=none,id='
> > > > + 'drive-virtio-disk1',
> > > > + '-device',
> > > > 'virtio-blk-pci,scsi=off,bus=pci.0,'
> > > > +
> > > > 'addr=0xb,drive=drive-virtio-disk1,id=virtio-disk1'
> > > > + ',bootindex=2')
> > > > + self.common_tuxrun(drive="scsi-hd")
> > > >
> > > > def test_ppc64le(self):
> > > > """
> > > > :avocado: tags=arch:ppc64
> > > > :avocado: tags=machine:pseries
> > > > - :avocado: tags=cpu:POWER8
> > > > + :avocado: tags=cpu:POWER10
> > > > :avocado: tags=console:hvc0
> > > > :avocado: tags=tuxboot:ppc64le
> > > > :avocado: tags=image:vmlinux
> > > > :avocado: tags=extradev:driver=spapr-vscsi
> > > > :avocado: tags=root:sda
> > > > """
> > > > - self.common_tuxrun(drive="scsi-hd")
> > > > + # add device args to command line.
> > > > + self.vm.add_args('-netdev', 'user,id=vnet,hostfwd=:127.0.0.1:0
> > > > -:22',
> > > > + '-device', 'virtio-net,netdev=vnet')
> > > > + self.vm.add_args('-netdev', '{"type":"user","id":"hostnet0"}',
> > > > + '-device',
> > > > '{"driver":"virtio-net-pci","netdev":'
> > > > +
> > > > '"hostnet0","id":"net0","mac":"52:54:00:4c:e3:86",'
> > > > + '"bus":"pci.0","addr":"0x9"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"qemu-xhci","p2":15,"p3":15,'
> > > > + '"id":"usb","bus":"pci.0","addr":"0x2"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"virtio-scsi-pci","id":"scsi0"'
> > > > + ',"bus":"pci.0","addr":"0x3"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"virtio-serial-pci","id":'
> > > > +
> > > > '"virtio-serial0","bus":"pci.0","addr":"0x4"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"scsi-cd","bus":"scsi0.0"'
> > > > +
> > > > ',"channel":0,"scsi-id":0,"lun":0,"device_id":'
> > > > + '"drive-scsi0-0-0-0","id":"scsi0-0-0-0"}')
> > > > + self.vm.add_args('-device', '{"driver":"virtio-balloon-pci",'
> > > > + '"id":"balloon0","bus":"pci.0","addr":"0x6"}')
> > > > + self.vm.add_args('-audiodev',
> > > > '{"id":"audio1","driver":"none"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"usb-tablet","id":"input0"'
> > > > + ',"bus":"usb.0","port":"1"}')
> > > > + self.vm.add_args('-device', '{"driver":"usb-kbd","id":"input1"'
> > > > + ',"bus":"usb.0","port":"2"}')
> > > > + self.vm.add_args('-device', '{"driver":"VGA","id":"video0",'
> > > > + '"vgamem_mb":16,"bus":"pci.0","addr":"0x7"}')
> > > > + self.vm.add_args('-object',
> > > > '{"qom-type":"rng-random","id":"objrng0"'
> > > > + ',"filename":"/dev/urandom"}',
> > > > + '-device',
> > > > '{"driver":"virtio-rng-pci","rng":"objrng0"'
> > > > + ',"id":"rng0","bus":"pci.0","addr":"0x8"}')
> > > > + self.vm.add_args('-object',
> > > > '{"qom-type":"cryptodev-backend-builtin",'
> > > > + '"id":"objcrypto0","queues":1}',
> > > > + '-device', '{"driver":"virtio-crypto-pci",'
> > > > +
> > > > '"cryptodev":"objcrypto0","id":"crypto0","bus"'
> > > > + ':"pci.0","addr":"0xa"}')
> > > > + self.vm.add_args('-device', '{"driver":"spapr-pci-host-bridge"'
> > > > + ',"index":1,"id":"pci.1"}')
> > > > + self.vm.add_args('-device',
> > > > '{"driver":"spapr-vscsi","id":"scsi1"'
> > > > + ',"reg":12288}')
> > > > + self.vm.add_args('-m', '2G,slots=32,maxmem=4G',
> > > > + '-object',
> > > > 'memory-backend-ram,id=ram1,size=1G',
> > > > + '-device', 'pc-dimm,id=dimm1,memdev=ram1')
> > > > +
> > > > + # Create a temporary qcow2 and launch the test-case
> > > > + with tempfile.NamedTemporaryFile(prefix='tuxrun_ppc64le_',
> > > > + suffix='.qcow2') as qcow2:
> > > > + process.run(self.qemu_img + ' create -f qcow2 ' +
> > > > + qcow2.name + ' 1G')
> > > > +
> > > > + self.vm.add_args('-drive', 'file=' + qcow2.name +
> > > > + ',format=qcow2,if=none,id='
> > > > + 'drive-virtio-disk1',
> > > > + '-device',
> > > > 'virtio-blk-pci,scsi=off,bus=pci.0,'
> > > > +
> > > > 'addr=0xb,drive=drive-virtio-disk1,id=virtio-disk1'
> > > > + ',bootindex=2')
> > > > + self.common_tuxrun(drive="scsi-hd")
> > > >
> > > > def test_riscv32(self):
> > > > """
> > > > --
> > > > 2.25.1
> > > >
> > > >
> > > >
>
[PATCH v3 1/2] avocado_qemu/__init__.py: factor out the qemu-img finding, Kautuk Consul, 2023/04/20
Re: [PATCH v3 0/2] Improve avocado code coverage for ppc64, Alex Bennée, 2023/04/20