Re: [PATCH v3 2/2] tests/avocado/tuxrun_baselines.py: improve code coverage for ppc64

[Kautuk Consul]

Hi,

On 2023-04-20 19:20:40, Harsh Prateek Bora wrote:
> Since we are optimising code a lot, one suggestion below:
> 
> 
> On Thu, Apr 20, 2023 at 6:23 PM Kautuk Consul <kconsul@linux.vnet.ibm.com>
> wrote:
> 
> > Commit c0c8687ef0fd990db8db1655a8a6c5a5e35dd4bb disabled the
> > boot_linux.py test-case due to which the code coverage for ppc
> > decreased by around 2%. As per the discussion on
> > https://lore.kernel.org/qemu-devel/87sfdpqcy4.fsf@linaro.org/ it
> > was mentioned that the baseline test for ppc64 could be modified
> > to make up this 2% code coverage. This patch attempts to achieve
> > this 2% code coverage by adding various device command line
> > arguments (to ./qemu-system-ppc64) in the tuxrun_baselines.py
> > test-case.
> >
> > The code coverage report with boot_linux.py, without it and finally
> > with these tuxrun_baselines.py changes is as follows:
> >
> > With boot_linux.py
> > ------------------
> >   lines......: 13.8% (58006 of 420997 lines)
> >   functions..: 20.7% (7675 of 36993 functions)
> >   branches...: 9.2% (22146 of 240611 branches)
> > Without boot_linux.py (without this patch changes)
> > --------------------------------------------------
> >   lines......: 11.9% (50174 of 420997 lines)
> >   functions..: 18.8% (6947 of 36993 functions)
> >   branches...: 7.4% (17580 of 239017 branches)
> > Without boot_linux.py (with this patch changes)
> > -----------------------------------------------
> >   lines......: 13.8% (58287 of 420997 lines)
> >   functions..: 20.7% (7640 of 36993 functions)
> >   branches...: 8.4% (20223 of 240611 branches)
> >
> > Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
> > Reported-by: Alex Bennée <alex.bennee@linaro.org>
> > ---
> >  tests/avocado/tuxrun_baselines.py | 120 +++++++++++++++++++++++++++++-
> >  1 file changed, 116 insertions(+), 4 deletions(-)
> >
> > diff --git a/tests/avocado/tuxrun_baselines.py
> > b/tests/avocado/tuxrun_baselines.py
> > index d343376faa..ae082ac028 100644
> > --- a/tests/avocado/tuxrun_baselines.py
> > +++ b/tests/avocado/tuxrun_baselines.py
> > @@ -11,6 +11,7 @@
> >
> >  import os
> >  import time
> > +import tempfile
> >
> > <snip>
> >          """
> > -        self.common_tuxrun(drive="scsi-hd")
> > +
> > +        # add device args to command line.
> > +        self.vm.add_args('-netdev', 'user,id=vnet,hostfwd=:127.0.0.1:0
> > -:22',
> > +                         '-device', 'virtio-net,netdev=vnet')
> > +        self.vm.add_args('-netdev', '{"type":"user","id":"hostnet0"}',
> > +                         '-device', '{"driver":"virtio-net-pci","netdev":'
> > +
> >  '"hostnet0","id":"net0","mac":"52:54:00:4c:e3:86",'
> > +                         '"bus":"pci.0","addr":"0x9"}')
> > +        self.vm.add_args('-device',
> > '{"driver":"qemu-xhci","p2":15,"p3":15,'
> > +                         '"id":"usb","bus":"pci.0","addr":"0x2"}')
> > +        self.vm.add_args('-device',
> > '{"driver":"virtio-scsi-pci","id":"scsi0"'
> > +                         ',"bus":"pci.0","addr":"0x3"}')
> > +        self.vm.add_args('-device', '{"driver":"virtio-serial-pci","id":'
> > +                         '"virtio-serial0","bus":"pci.0","addr":"0x4"}')
> > +        self.vm.add_args('-device', '{"driver":"scsi-cd","bus":"scsi0.0"'
> > +                         ',"channel":0,"scsi-id":0,"lun":0,"device_id":'
> > +                         '"drive-scsi0-0-0-0","id":"scsi0-0-0-0"}')
> > +        self.vm.add_args('-device', '{"driver":"virtio-balloon-pci",'
> > +                         '"id":"balloon0","bus":"pci.0","addr":"0x6"}')
> > +        self.vm.add_args('-audiodev', '{"id":"audio1","driver":"none"}')
> > +        self.vm.add_args('-device', '{"driver":"usb-tablet","id":"input0"'
> > +                         ',"bus":"usb.0","port":"1"}')
> > +        self.vm.add_args('-device', '{"driver":"usb-kbd","id":"input1"'
> > +                         ',"bus":"usb.0","port":"2"}')
> > +        self.vm.add_args('-device', '{"driver":"VGA","id":"video0",'
> > +                         '"vgamem_mb":16,"bus":"pci.0","addr":"0x7"}')
> > +        self.vm.add_args('-object',
> > '{"qom-type":"rng-random","id":"objrng0"'
> > +                         ',"filename":"/dev/urandom"}',
> > +                         '-device',
> > '{"driver":"virtio-rng-pci","rng":"objrng0"'
> > +                         ',"id":"rng0","bus":"pci.0","addr":"0x8"}')
> > +        self.vm.add_args('-object',
> > '{"qom-type":"cryptodev-backend-builtin",'
> > +                         '"id":"objcrypto0","queues":1}',
> > +                         '-device', '{"driver":"virtio-crypto-pci",'
> > +                         '"cryptodev":"objcrypto0","id":"crypto0","bus"'
> > +                         ':"pci.0","addr":"0xa"}')
> > +        self.vm.add_args('-device', '{"driver":"spapr-pci-host-bridge"'
> > +                         ',"index":1,"id":"pci.1"}')
> > +        self.vm.add_args('-device', '{"driver":"spapr-vscsi","id":"scsi1"'
> > +                         ',"reg":12288}')
> > +        self.vm.add_args('-m', '2G,slots=32,maxmem=4G',
> > +                         '-object', 'memory-backend-ram,id=ram1,size=1G',
> > +                         '-device', 'pc-dimm,id=dimm1,memdev=ram1')
> > +
> >
> 
> 
> Most of the above code for adding args is getting duplicated in the test
> for ppc64le below as well.
> It could be contained in a helper routine which could be called from both,
> and would be easier to maintain.
I kept it separate because there may be some future reason to make the
devices different for ppc and ppc64le. I know that probably won't happen
but thought to keep it separate to allow for that possibility.
Or if you feel that they should be exactly the same maybe I could send
another patch after this to refactor the code into a single routine ?
> 
> regards,
> Harsh
> 
> +        # Create a temporary qcow2 and launch the test-case
> > +        with tempfile.NamedTemporaryFile(prefix='tuxrun_ppc64_',
> > +                                         suffix='.qcow2') as qcow2:
> > +            process.run(self.qemu_img + ' create -f qcow2 ' +
> > +                        qcow2.name + ' 1G')
> > +
> > +            self.vm.add_args('-drive', 'file=' + qcow2.name +
> > +                         ',format=qcow2,if=none,id='
> > +                         'drive-virtio-disk1',
> > +                         '-device', 'virtio-blk-pci,scsi=off,bus=pci.0,'
> > +
> >  'addr=0xb,drive=drive-virtio-disk1,id=virtio-disk1'
> > +                         ',bootindex=2')
> > +            self.common_tuxrun(drive="scsi-hd")
> >
> >      def test_ppc64le(self):
> >          """
> >          :avocado: tags=arch:ppc64
> >          :avocado: tags=machine:pseries
> > -        :avocado: tags=cpu:POWER8
> > +        :avocado: tags=cpu:POWER10
> >          :avocado: tags=console:hvc0
> >          :avocado: tags=tuxboot:ppc64le
> >          :avocado: tags=image:vmlinux
> >          :avocado: tags=extradev:driver=spapr-vscsi
> >          :avocado: tags=root:sda
> >          """
> > -        self.common_tuxrun(drive="scsi-hd")
> > +        # add device args to command line.
> > +        self.vm.add_args('-netdev', 'user,id=vnet,hostfwd=:127.0.0.1:0
> > -:22',
> > +                         '-device', 'virtio-net,netdev=vnet')
> > +        self.vm.add_args('-netdev', '{"type":"user","id":"hostnet0"}',
> > +                         '-device', '{"driver":"virtio-net-pci","netdev":'
> > +
> >  '"hostnet0","id":"net0","mac":"52:54:00:4c:e3:86",'
> > +                         '"bus":"pci.0","addr":"0x9"}')
> > +        self.vm.add_args('-device',
> > '{"driver":"qemu-xhci","p2":15,"p3":15,'
> > +                         '"id":"usb","bus":"pci.0","addr":"0x2"}')
> > +        self.vm.add_args('-device',
> > '{"driver":"virtio-scsi-pci","id":"scsi0"'
> > +                         ',"bus":"pci.0","addr":"0x3"}')
> > +        self.vm.add_args('-device', '{"driver":"virtio-serial-pci","id":'
> > +                         '"virtio-serial0","bus":"pci.0","addr":"0x4"}')
> > +        self.vm.add_args('-device', '{"driver":"scsi-cd","bus":"scsi0.0"'
> > +                         ',"channel":0,"scsi-id":0,"lun":0,"device_id":'
> > +                         '"drive-scsi0-0-0-0","id":"scsi0-0-0-0"}')
> > +        self.vm.add_args('-device', '{"driver":"virtio-balloon-pci",'
> > +                         '"id":"balloon0","bus":"pci.0","addr":"0x6"}')
> > +        self.vm.add_args('-audiodev', '{"id":"audio1","driver":"none"}')
> > +        self.vm.add_args('-device', '{"driver":"usb-tablet","id":"input0"'
> > +                         ',"bus":"usb.0","port":"1"}')
> > +        self.vm.add_args('-device', '{"driver":"usb-kbd","id":"input1"'
> > +                         ',"bus":"usb.0","port":"2"}')
> > +        self.vm.add_args('-device', '{"driver":"VGA","id":"video0",'
> > +                         '"vgamem_mb":16,"bus":"pci.0","addr":"0x7"}')
> > +        self.vm.add_args('-object',
> > '{"qom-type":"rng-random","id":"objrng0"'
> > +                         ',"filename":"/dev/urandom"}',
> > +                         '-device',
> > '{"driver":"virtio-rng-pci","rng":"objrng0"'
> > +                         ',"id":"rng0","bus":"pci.0","addr":"0x8"}')
> > +        self.vm.add_args('-object',
> > '{"qom-type":"cryptodev-backend-builtin",'
> > +                         '"id":"objcrypto0","queues":1}',
> > +                         '-device', '{"driver":"virtio-crypto-pci",'
> > +                         '"cryptodev":"objcrypto0","id":"crypto0","bus"'
> > +                         ':"pci.0","addr":"0xa"}')
> > +        self.vm.add_args('-device', '{"driver":"spapr-pci-host-bridge"'
> > +                         ',"index":1,"id":"pci.1"}')
> > +        self.vm.add_args('-device', '{"driver":"spapr-vscsi","id":"scsi1"'
> > +                         ',"reg":12288}')
> > +        self.vm.add_args('-m', '2G,slots=32,maxmem=4G',
> > +                         '-object', 'memory-backend-ram,id=ram1,size=1G',
> > +                         '-device', 'pc-dimm,id=dimm1,memdev=ram1')
> > +
> > +        # Create a temporary qcow2 and launch the test-case
> > +        with tempfile.NamedTemporaryFile(prefix='tuxrun_ppc64le_',
> > +                                         suffix='.qcow2') as qcow2:
> > +            process.run(self.qemu_img + ' create -f qcow2 ' +
> > +                        qcow2.name + ' 1G')
> > +
> > +            self.vm.add_args('-drive', 'file=' + qcow2.name +
> > +                         ',format=qcow2,if=none,id='
> > +                         'drive-virtio-disk1',
> > +                         '-device', 'virtio-blk-pci,scsi=off,bus=pci.0,'
> > +
> >  'addr=0xb,drive=drive-virtio-disk1,id=virtio-disk1'
> > +                         ',bootindex=2')
> > +            self.common_tuxrun(drive="scsi-hd")
> >
> >      def test_riscv32(self):
> >          """
> > --
> > 2.25.1
> >
> >
> >