[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 02/21] target/riscv: Clean up division helpers
From: |
Bin Meng |
Subject: |
Re: [PATCH v2 02/21] target/riscv: Clean up division helpers |
Date: |
Wed, 18 Aug 2021 17:20:31 +0800 |
On Wed, Aug 18, 2021 at 5:18 AM Richard Henderson
<richard.henderson@linaro.org> wrote:
>
> Utilize the condition in the movcond more; this allows some of
> the setcond that were feeding into movcond to be removed.
> Do not write into source1 and source2. Re-name "condN" to "tempN"
> and use the temporaries for more than holding conditions.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
> target/riscv/translate.c | 137 +++++++++++++++++++--------------------
> 1 file changed, 65 insertions(+), 72 deletions(-)
>
> diff --git a/target/riscv/translate.c b/target/riscv/translate.c
> index 20a55c92fb..6ae7e140d0 100644
> --- a/target/riscv/translate.c
> +++ b/target/riscv/translate.c
> @@ -213,106 +213,99 @@ static void gen_mulhsu(TCGv ret, TCGv arg1, TCGv arg2)
>
> static void gen_div(TCGv ret, TCGv source1, TCGv source2)
> {
> - TCGv cond1, cond2, zeroreg, resultopt1;
> + TCGv temp1, temp2, zero, one, mone, min;
> +
> /*
> * Handle by altering args to tcg_gen_div to produce req'd results:
> - * For overflow: want source1 in source1 and 1 in source2
> - * For div by zero: want -1 in source1 and 1 in source2 -> -1 result
> + * For overflow: want source1 in temp1 and 1 in temp2
> + * For div by zero: want -1 in temp1 and 1 in temp2 -> -1 result
> */
> - cond1 = tcg_temp_new();
> - cond2 = tcg_temp_new();
> - zeroreg = tcg_constant_tl(0);
> - resultopt1 = tcg_temp_new();
> + temp1 = tcg_temp_new();
> + temp2 = tcg_temp_new();
> + zero = tcg_constant_tl(0);
> + one = tcg_constant_tl(1);
> + mone = tcg_constant_tl(-1);
> + min = tcg_constant_tl(1ull << (TARGET_LONG_BITS - 1));
> +
> + tcg_gen_setcond_tl(TCG_COND_EQ, temp2, source2, mone);
> + tcg_gen_setcond_tl(TCG_COND_EQ, temp1, source1, min);
nits: I would put temp1 before temp2
> + tcg_gen_and_tl(temp1, temp1, temp2); /* temp1 = overflow */
> + tcg_gen_setcond_tl(TCG_COND_EQ, temp2, source2, zero); /* temp2 = div0 */
> + tcg_gen_or_tl(temp2, temp2, temp1); /* temp2 = overflow | div0 */
>
> - tcg_gen_movi_tl(resultopt1, (target_ulong)-1);
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond2, source2, (target_ulong)(~0L));
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond1, source1,
> - ((target_ulong)1) << (TARGET_LONG_BITS - 1));
> - tcg_gen_and_tl(cond1, cond1, cond2); /* cond1 = overflow */
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond2, source2, 0); /* cond2 = div 0 */
> /* if div by zero, set source1 to -1, otherwise don't change */
%s/source1/temp1
> - tcg_gen_movcond_tl(TCG_COND_EQ, source1, cond2, zeroreg, source1,
> - resultopt1);
> - /* if overflow or div by zero, set source2 to 1, else don't change */
> - tcg_gen_or_tl(cond1, cond1, cond2);
> - tcg_gen_movi_tl(resultopt1, (target_ulong)1);
> - tcg_gen_movcond_tl(TCG_COND_EQ, source2, cond1, zeroreg, source2,
> - resultopt1);
> - tcg_gen_div_tl(ret, source1, source2);
> + tcg_gen_movcond_tl(TCG_COND_NE, temp1, source2, zero, source1, mone);
>
> - tcg_temp_free(cond1);
> - tcg_temp_free(cond2);
> - tcg_temp_free(resultopt1);
> + /* if overflow or div by zero, set source2 to 1, else don't change */
%s/source2/temp2
> + tcg_gen_movcond_tl(TCG_COND_EQ, temp2, temp2, zero, source2, one);
> +
> + tcg_gen_div_tl(ret, temp1, temp2);
> +
> + tcg_temp_free(temp1);
> + tcg_temp_free(temp2);
> }
>
> static void gen_divu(TCGv ret, TCGv source1, TCGv source2)
> {
> - TCGv cond1, zeroreg, resultopt1;
> - cond1 = tcg_temp_new();
> + TCGv temp1, temp2, zero, one, mone;
>
> - zeroreg = tcg_constant_tl(0);
> - resultopt1 = tcg_temp_new();
> + temp1 = tcg_temp_new();
> + temp2 = tcg_temp_new();
> + zero = tcg_constant_tl(0);
> + one = tcg_constant_tl(1);
> + mone = tcg_constant_tl(-1);
-1 is not a possible return value of divu. This should be ULONG_MAX.
>
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond1, source2, 0);
> - tcg_gen_movi_tl(resultopt1, (target_ulong)-1);
> - tcg_gen_movcond_tl(TCG_COND_EQ, source1, cond1, zeroreg, source1,
> - resultopt1);
> - tcg_gen_movi_tl(resultopt1, (target_ulong)1);
> - tcg_gen_movcond_tl(TCG_COND_EQ, source2, cond1, zeroreg, source2,
> - resultopt1);
> - tcg_gen_divu_tl(ret, source1, source2);
> + tcg_gen_movcond_tl(TCG_COND_NE, temp1, source2, zero, source1, mone);
not "mone" here
> + tcg_gen_movcond_tl(TCG_COND_NE, temp2, source2, zero, source2, one);
> + tcg_gen_divu_tl(ret, temp1, temp2);
>
> - tcg_temp_free(cond1);
> - tcg_temp_free(resultopt1);
> + tcg_temp_free(temp1);
> + tcg_temp_free(temp2);
> }
>
> static void gen_rem(TCGv ret, TCGv source1, TCGv source2)
> {
> - TCGv cond1, cond2, zeroreg, resultopt1;
> + TCGv temp1, temp2, zero, one, mone, min;
>
> - cond1 = tcg_temp_new();
> - cond2 = tcg_temp_new();
> - zeroreg = tcg_constant_tl(0);
> - resultopt1 = tcg_temp_new();
> + temp1 = tcg_temp_new();
> + temp2 = tcg_temp_new();
> + zero = tcg_constant_tl(0);
> + one = tcg_constant_tl(1);
> + mone = tcg_constant_tl(-1);
> + min = tcg_constant_tl(1ull << (TARGET_LONG_BITS - 1));
> +
> + tcg_gen_setcond_tl(TCG_COND_EQ, temp2, source2, mone);
> + tcg_gen_setcond_tl(TCG_COND_EQ, temp1, source1, min);
> + tcg_gen_and_tl(temp1, temp1, temp2); /* temp1 = overflow */
> + tcg_gen_setcondi_tl(TCG_COND_EQ, temp2, source2, 0); /* temp2 = div0 */
Is there any difference here if using zero/setcond instead of
0/setcondi? If not, I would prefer using zero/setcond for consistency.
> + tcg_gen_or_tl(temp2, temp2, temp1); /* temp2 = overflow | div0 */
>
> - tcg_gen_movi_tl(resultopt1, 1L);
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond2, source2, (target_ulong)-1);
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond1, source1,
> - (target_ulong)1 << (TARGET_LONG_BITS - 1));
> - tcg_gen_and_tl(cond2, cond1, cond2); /* cond1 = overflow */
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond1, source2, 0); /* cond2 = div 0 */
> /* if overflow or div by zero, set source2 to 1, else don't change */
> - tcg_gen_or_tl(cond2, cond1, cond2);
> - tcg_gen_movcond_tl(TCG_COND_EQ, source2, cond2, zeroreg, source2,
> - resultopt1);
> - tcg_gen_rem_tl(resultopt1, source1, source2);
> - /* if div by zero, just return the original dividend */
> - tcg_gen_movcond_tl(TCG_COND_EQ, ret, cond1, zeroreg, resultopt1,
> - source1);
> + tcg_gen_movcond_tl(TCG_COND_EQ, temp2, temp2, zero, source2, one);
> + tcg_gen_rem_tl(temp1, temp1, temp2);
This is wrong as temp1 is not the dividend.
>
> - tcg_temp_free(cond1);
> - tcg_temp_free(cond2);
> - tcg_temp_free(resultopt1);
> + /* if div by zero, just return the original dividend */
> + tcg_gen_movcond_tl(TCG_COND_NE, ret, source2, zero, temp1, source1);
> +
> + tcg_temp_free(temp1);
> + tcg_temp_free(temp2);
> }
>
> static void gen_remu(TCGv ret, TCGv source1, TCGv source2)
> {
> - TCGv cond1, zeroreg, resultopt1;
> - cond1 = tcg_temp_new();
> - zeroreg = tcg_constant_tl(0);
> - resultopt1 = tcg_temp_new();
> + TCGv temp2, zero, one;
> +
> + temp2 = tcg_temp_new();
> + zero = tcg_constant_tl(0);
> + one = tcg_constant_tl(1);
> +
> + tcg_gen_movcond_tl(TCG_COND_EQ, temp2, source2, zero, source2, one);
This should be TCG_COND_NE.
> + tcg_gen_remu_tl(temp2, source1, temp2);
>
> - tcg_gen_movi_tl(resultopt1, (target_ulong)1);
> - tcg_gen_setcondi_tl(TCG_COND_EQ, cond1, source2, 0);
> - tcg_gen_movcond_tl(TCG_COND_EQ, source2, cond1, zeroreg, source2,
> - resultopt1);
> - tcg_gen_remu_tl(resultopt1, source1, source2);
> /* if div by zero, just return the original dividend */
> - tcg_gen_movcond_tl(TCG_COND_EQ, ret, cond1, zeroreg, resultopt1,
> - source1);
> + tcg_gen_movcond_tl(TCG_COND_NE, ret, source2, zero, temp2, source1);
>
> - tcg_temp_free(cond1);
> - tcg_temp_free(resultopt1);
> + tcg_temp_free(temp2);
> }
>
> static void gen_jal(DisasContext *ctx, int rd, target_ulong imm)
Regards,
Bin
- [PATCH v2 00/21] target/riscv: Use tcg_constant_*, Richard Henderson, 2021/08/17
- [PATCH v2 01/21] target/riscv: Use tcg_constant_*, Richard Henderson, 2021/08/17
- [PATCH v2 02/21] target/riscv: Clean up division helpers, Richard Henderson, 2021/08/17
- Re: [PATCH v2 02/21] target/riscv: Clean up division helpers,
Bin Meng <=
- [PATCH v2 03/21] target/riscv: Add DisasContext to gen_get_gpr, gen_set_gpr, Richard Henderson, 2021/08/17
- [PATCH v2 04/21] target/riscv: Introduce DisasExtend and new helpers, Richard Henderson, 2021/08/17
- [PATCH v2 05/21] target/riscv: Add DisasExtend to gen_arith*, Richard Henderson, 2021/08/17