[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 2/9] hw/block/pflash_cfi01: Extract pflash_cfi01_fill_cfi_tab
From: |
David Edmondson |
Subject: |
Re: [PATCH 2/9] hw/block/pflash_cfi01: Extract pflash_cfi01_fill_cfi_table() |
Date: |
Wed, 10 Mar 2021 09:31:59 +0000 |
On Wednesday, 2021-03-10 at 00:50:21 +01, Philippe Mathieu-Daudé wrote:
> Fill the CFI table in out of DeviceRealize() in a new function:
> pflash_cfi01_fill_cfi_table().
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
> ---
> hw/block/pflash_cfi01.c | 140 +++++++++++++++++++++-------------------
> 1 file changed, 73 insertions(+), 67 deletions(-)
>
> diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
> index b6919bbe474..03472ea5b64 100644
> --- a/hw/block/pflash_cfi01.c
> +++ b/hw/block/pflash_cfi01.c
> @@ -704,30 +704,11 @@ static const MemoryRegionOps pflash_cfi01_ops = {
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> -static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
> +static void pflash_cfi01_fill_cfi_table(PFlashCFI01 *pfl)
> {
> - ERRP_GUARD();
> - PFlashCFI01 *pfl = PFLASH_CFI01(dev);
> - uint64_t total_len;
> - int ret;
> uint64_t blocks_per_device, sector_len_per_device, device_len;
> int num_devices;
>
> - if (pfl->sector_len == 0) {
> - error_setg(errp, "attribute \"sector-length\" not specified or
> zero.");
> - return;
> - }
> - if (pfl->nb_blocs == 0) {
> - error_setg(errp, "attribute \"num-blocks\" not specified or zero.");
> - return;
> - }
> - if (pfl->name == NULL) {
> - error_setg(errp, "attribute \"name\" not specified.");
> - return;
> - }
> -
> - total_len = pfl->sector_len * pfl->nb_blocs;
> -
> /*
> * These are only used to expose the parameters of each device
> * in the cfi_table[].
> @@ -742,53 +723,6 @@ static void pflash_cfi01_realize(DeviceState *dev, Error
> **errp)
> }
> device_len = sector_len_per_device * blocks_per_device;
>
> - memory_region_init_rom_device(
> - &pfl->mem, OBJECT(dev),
> - &pflash_cfi01_ops,
> - pfl,
> - pfl->name, total_len, errp);
> - if (*errp) {
> - return;
> - }
> -
> - pfl->storage = memory_region_get_ram_ptr(&pfl->mem);
> - sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
> -
> - if (pfl->blk) {
> - uint64_t perm;
> - pfl->ro = !blk_supports_write_perm(pfl->blk);
> - perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE);
> - ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp);
> - if (ret < 0) {
> - return;
> - }
> - } else {
> - pfl->ro = 0;
> - }
> -
> - if (pfl->blk) {
> - if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, total_len,
> - errp)) {
> - vmstate_unregister_ram(&pfl->mem, DEVICE(pfl));
> - return;
> - }
> - }
> -
> - /*
> - * Default to devices being used at their maximum device width. This was
> - * assumed before the device_width support was added.
> - */
> - if (!pfl->max_device_width) {
> - pfl->max_device_width = pfl->device_width;
> - }
> -
> - pfl->wcycle = 0;
> - /*
> - * The command 0x00 is not assigned by the CFI open standard,
> - * but QEMU historically uses it for the READ_ARRAY command (0xff).
> - */
> - pfl->cmd = 0x00;
> - pfl->status = 0x80; /* WSM ready */
> /* Hardcoded CFI table */
> /* Standard "QRY" string */
> pfl->cfi_table[0x10] = 'Q';
> @@ -876,6 +810,78 @@ static void pflash_cfi01_realize(DeviceState *dev, Error
> **errp)
> pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */
> }
>
> +static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
> +{
> + ERRP_GUARD();
> + PFlashCFI01 *pfl = PFLASH_CFI01(dev);
> + uint64_t total_len;
> + int ret;
> +
> + if (pfl->sector_len == 0) {
> + error_setg(errp, "attribute \"sector-length\" not specified or
> zero.");
> + return;
> + }
> + if (pfl->nb_blocs == 0) {
> + error_setg(errp, "attribute \"num-blocks\" not specified or zero.");
> + return;
> + }
> + if (pfl->name == NULL) {
> + error_setg(errp, "attribute \"name\" not specified.");
> + return;
> + }
> +
> + total_len = pfl->sector_len * pfl->nb_blocs;
> +
> + memory_region_init_rom_device(
> + &pfl->mem, OBJECT(dev),
> + &pflash_cfi01_ops,
> + pfl,
> + pfl->name, total_len, errp);
> + if (*errp) {
> + return;
> + }
> +
> + pfl->storage = memory_region_get_ram_ptr(&pfl->mem);
> + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
> +
> + if (pfl->blk) {
> + uint64_t perm;
> + pfl->ro = !blk_supports_write_perm(pfl->blk);
> + perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE);
> + ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp);
> + if (ret < 0) {
> + return;
> + }
> + } else {
> + pfl->ro = 0;
> + }
> +
> + if (pfl->blk) {
> + if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, total_len,
> + errp)) {
> + vmstate_unregister_ram(&pfl->mem, DEVICE(pfl));
> + return;
> + }
> + }
> +
> + /*
> + * Default to devices being used at their maximum device width. This was
> + * assumed before the device_width support was added.
> + */
> + if (!pfl->max_device_width) {
> + pfl->max_device_width = pfl->device_width;
> + }
> +
> + pfl->wcycle = 0;
> + /*
> + * The command 0x00 is not assigned by the CFI open standard,
> + * but QEMU historically uses it for the READ_ARRAY command (0xff).
> + */
> + pfl->cmd = 0x00;
> + pfl->status = 0x80; /* WSM ready */
> + pflash_cfi01_fill_cfi_table(pfl);
> +}
> +
> static void pflash_cfi01_system_reset(DeviceState *dev)
> {
> PFlashCFI01 *pfl = PFLASH_CFI01(dev);
> --
> 2.26.2
dme.
--
She's as sweet as Tupelo honey, she's an angel of the first degree.
- [PATCH 0/9] hw/block/pflash: Refactors around setting the device in read-array mode, Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 1/9] hw/block/pflash_cfi: Fix code style for checkpatch.pl, Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 2/9] hw/block/pflash_cfi01: Extract pflash_cfi01_fill_cfi_table(), Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 3/9] hw/block/pflash_cfi02: Extract pflash_cfi02_fill_cfi_table(), Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 4/9] hw/block/pflash_cfi02: Set rom_mode to true in pflash_setup_mappings(), Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 5/9] hw/block/pflash_cfi02: Open-code pflash_register_memory(rom=false), Philippe Mathieu-Daudé, 2021/03/09
- [PATCH 6/9] hw/block/pflash_cfi02: Rename register_memory(true) as mode_read_array, Philippe Mathieu-Daudé, 2021/03/09