Re: [PATCH RFC] memory: pause all vCPUs for the duration of memory transactions

[Vitaly Kuznetsov]

Peter Xu <peterx@redhat.com> writes:

> On Wed, Nov 04, 2020 at 07:09:02PM +0100, Laszlo Ersek wrote:
>> On 11/03/20 17:37, Peter Xu wrote:
>> > On Tue, Nov 03, 2020 at 02:07:09PM +0100, Vitaly Kuznetsov wrote:
>> >> In case it is a normal access from the guest, yes, but AFAIR here
>> >> guest's CR3 is pointing to non existent memory and when KVM detects that
>> >> it injects #PF by itself without a loop through userspace.
>> > 
>> > I see, thanks Vitaly.  I think this kind of answered my previous confusion 
>> > on
>> > why we can't just bounce all these to QEMU since I thought QEMU should try 
>> > to
>> > take the bql if it's mmio access - probably because there're quite a lot of
>> > references to guest memslots in kernel that cannot be naturally treated as
>> > guest MMIO access (especially for nested, maybe?) so that maybe it's very 
>> > hard
>> > to cover all of them.  Paolo has mentioned quite a few times that he'd 
>> > prefer a
>> > kernel solution for this; I feel like I understand better on the reason 
>> > now..
>> > 
>> > Have any of us tried to collect the requirements on this new kernel 
>> > interface
>> > (if to be proposed)?  I'm kind of thinking how it would look like to solve 
>> > all
>> > the pains we have right now.
>> > 
>> > Firstly, I think we'd likely want to have the capability to handle "holes" 
>> > in
>> > memslots, either to punch a hole, which iiuc is the problem behind this 
>> > patch.
>> > Or the reversed operation, which is to fill up a whole that we've just 
>> > punched.
>> > The other major one could be virtio-mem who would like to extend or shrink 
>> > an
>> > existing memslot.  However IIUC that's also doable with the "hole" idea in 
>> > that
>> > we can create the memslot with the maximum supported size, then "punch a 
>> > hole"
>> > at the end of the memslot just like it shrinked.  When extend, we shrink 
>> > the
>> > hole instead rather than the memslot.
>> > 
>> > Then there's the other case where we want to keep the dirty bitmap when
>> > punching a hole on existing ram.  If with the "hole" idea in the kernel, it
>> > seems easy too - when we punch the hole, we drop dirty bitmaps only for the
>> > range covered by the hole.  Then we won't lose the rest bitmaps that where 
>> > the
>> > RAM still makes sense, since the memslot will use the same bitmap 
>> > before/after
>> > punching a hole.
>> > 
>> > So now an simple idea comes to my mind (I think we can have even more 
>> > better,
>> > or more complicated ideas, e.g., to make kvm memslot a tree? But I'll start
>> > with the simple): maybe we just need to teach each kvm memslot to take 
>> > "holes"
>> > within itself.  By default, there's no holes with 
>> > KVM_SET_USER_MEMORY_REGION
>> > configured kvm memslots, then we can configure holes for each memslot 
>> > using a
>> > new flag (assuming, KVM_MEM_SET_HOLE) of the same ioctl (after 
>> > LOG_DIRTY_PAGES
>> > and READ_ONLY).  Initially we may add a restriction on how many holes we 
>> > need,
>> > so the holes can also be an array.
>> > 
>> > Thoughts?
>> 
>> My only one (and completely unwashed / uneducated) thought is that this
>> resembles the fact (?) that VMAs are represented as rbtrees. So maybe
>> don't turn a single KVM memslot into a tree, but represent the full set
>> of KVM memslots as an rbtree?
>> 
>> My understanding is that "interval tree" is one of the most efficient
>> data structures for tracking a set of (discontiguous) memory regions,
>> and that an rbtree can be generalized into an interval tree. I'm super
>> rusty on the theory (after having contributed a genuine rbtree impl to
>> edk2 in 2014, sic transit gloria mundi :/), but I think that's what the
>> VMA stuff in the kernel does, effectively.
>> 
>> Perhaps it could apply to KVM memslots too.
>> 
>> Sorry if I'm making no sense, of course. (I'm going out on a limb with
>> posting this email, but whatever...)
>
> Appreciate your input, Laszlo.
>
> I agree that in most cases tree is more efficient.  Though, I feel like
> there're two issues, while the structure itself is the less important one.
>
> Firstly, about the "tree or array" question: I'm not sure whether it's 
> urgently
> needed for kvm.  Here imho slot lookup should be the major critical operation
> for kvm memslots, while crrent array impl of kvm memslot has already achieved
> something similar of a tree (O(logn)) by keeping the array ordered (can refer
> to search_memslots()).  That's why I think it's still ok.
>
> The other issue is about the "atomic update" of memslots that we're trying to
> look for a solution that can address all the issues we've seen.  IMHO it's a
> different problem to solve.  For example, even if we start to use tree
> structure, we'll still face the same issue when we want to punch a hole in an
> existing memslot - we'll still need to remove the tree node before adding the
> new one.  AFAICT, same failure could happen on CR3.
>
> So IMHO the more important question is how to make these operations atomic.
>
> To make things clearer, I'll also try to expand a bit more on the "hole" idea
> proposed above.
>
> Firstly, I believe there's also other solutions for these problems.
>
> Assuming we would like to remove slot X (range 0-4G), and add back slots X1
> (range 0-1G) and X2 (range 2G-4G), with range 1G-2G as new MMIO region.
>
> One example is, we can introduce another new ioctl to contain a few operations
> of KVM_SET_USER_MEMORY_REGION, then we can put three items in:
>
>   - Remove memslot X
>   - Add memslot X1
>   - Add memslot X2
>
> So that the container update will be atomic.  I think it works too at least 
> for
> the issue that this patch wants to address.  However I think it's not ideal.
> The thing is, the memslot ID could change before/after the new ioctl even if
> it's backing mostly the same thing.  Meanwhile, we'll need to destroy a 
> memslot
> that is destined to be added back with just some range information changed.
> E.g., if we have dirty bitmap, we need to drop it and reallocate again.  
> That's
> a waste, imho.
>
> So I'm thinking, how about we teach kvm similar things as what QEMU has 
> already
> know with those memory regions?  That means kvm would start to know "ok this
> memslot is always that one, it never changed, however we want to mask some of
> it and bounce to QEMU for whatever reason".  The simplest way to implement 
> this
> is to introduce a "hole" idea to kvm.  And as I mentioned, I believe an array
> would work too similar to memslots, but that's another story.
>
> One thing intersting about the "hole" idea is that, we don't need containers 
> to
> keep a bunch of KVM_SET_USER_MEMORY_REGION ioctls any more!  Because our
> operation is naturally atomic when represented as "holes": when we add a new
> MMIO region within a RAM range, we simply add a new hole element to the
> existing holes of this kvm memslot (note! adding the hole does _not_ change
> slot ID and everything of the slot itself; e.g. dirty bitmaps do not need to 
> be
> re-allocate when we operate on the holes).  As a summary, in the new world: A
> memslot should present something more close to ramblock in QEMU.  It means
> "this range will be used by the guest", but it does not mean that guest can
> access all of it.  When the access reaches a hole, we bounce to QEMU as if the
> memslot is missing.
>
> (Since this is really more kvm-specific, cc kvm list too)

Thank you for the write up Peter!

My first reaction to the 'hole' idea was that it's rather redundant and
sticking to the current concept where 'everything missing is a hole' is
sufficient. I, however, didn't think about dirty bitmap at all so maybe
it is worth considering.

As an in-KVM solution to the problem I could suggest an enhanced version
of KVM_SET_USER_MEMORY_REGION taking multiple regions (or even the whole
memmap for the guest) and we would process it in one shot. We can either
do it in an incremental form (add this, remove that) or require to
supply the full set so KVM will start with dropping everything. We can
also exploit Paolo's idea and make the call return dirty bitmaps of the
removed slots, however, this complicates things from both API (like if I
want to remove two slots and add three -- where would the dirty bitmap
go?) and QEMU PoV (as we don't necessarily want to consume dirty bitmap
when we do the update). So I'd stick with the 'incremental' idea.

Honestly, I'm not fully convinced we need an in-KVM idea. We'll still
have to kick all vCPUs out to do the update (for shorter period compared
to in-QEMU solution but still) so in case we are concerned about e.g. RT
workloads we should be as I don't see a way out: latency spikes are
inevitable.

-- 
Vitaly