[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 04/10] sparc32-ledma: don't reference nd_table directly within the
From: |
Mark Cave-Ayland |
Subject: |
[PULL 04/10] sparc32-ledma: don't reference nd_table directly within the device |
Date: |
Wed, 28 Oct 2020 08:23:52 +0000 |
Instead use qdev_set_nic_properties() to configure the on-board NIC at the
sun4m machine level.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200926140216.7368-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
hw/dma/sparc32_dma.c | 5 -----
hw/sparc/sun4m.c | 21 +++++++++++++--------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/hw/dma/sparc32_dma.c b/hw/dma/sparc32_dma.c
index 2cbe331959..b643b413c5 100644
--- a/hw/dma/sparc32_dma.c
+++ b/hw/dma/sparc32_dma.c
@@ -342,12 +342,7 @@ static void sparc32_ledma_device_realize(DeviceState *dev,
Error **errp)
{
LEDMADeviceState *s = SPARC32_LEDMA_DEVICE(dev);
SysBusPCNetState *lance = SYSBUS_PCNET(&s->lance);
- NICInfo *nd = &nd_table[0];
- /* FIXME use qdev NIC properties instead of nd_table[] */
- qemu_check_nic_model(nd, TYPE_LANCE);
-
- qdev_set_nic_properties(DEVICE(lance), nd);
object_property_set_link(OBJECT(lance), "dma", OBJECT(dev), &error_abort);
sysbus_realize(SYS_BUS_DEVICE(lance), &error_fatal);
}
diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
index 38d1e0fd12..66fecb152a 100644
--- a/hw/sparc/sun4m.c
+++ b/hw/sparc/sun4m.c
@@ -319,7 +319,7 @@ static void *iommu_init(hwaddr addr, uint32_t version,
qemu_irq irq)
static void *sparc32_dma_init(hwaddr dma_base,
hwaddr esp_base, qemu_irq espdma_irq,
- hwaddr le_base, qemu_irq ledma_irq)
+ hwaddr le_base, qemu_irq ledma_irq, NICInfo *nd)
{
DeviceState *dma;
ESPDMADeviceState *espdma;
@@ -328,16 +328,11 @@ static void *sparc32_dma_init(hwaddr dma_base,
SysBusPCNetState *lance;
dma = qdev_new(TYPE_SPARC32_DMA);
- sysbus_realize_and_unref(SYS_BUS_DEVICE(dma), &error_fatal);
- sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, dma_base);
-
espdma = SPARC32_ESPDMA_DEVICE(object_resolve_path_component(
OBJECT(dma), "espdma"));
sysbus_connect_irq(SYS_BUS_DEVICE(espdma), 0, espdma_irq);
esp = ESP(object_resolve_path_component(OBJECT(espdma), "esp"));
- sysbus_mmio_map(SYS_BUS_DEVICE(esp), 0, esp_base);
- scsi_bus_legacy_handle_cmdline(&esp->esp.bus);
ledma = SPARC32_LEDMA_DEVICE(object_resolve_path_component(
OBJECT(dma), "ledma"));
@@ -345,6 +340,14 @@ static void *sparc32_dma_init(hwaddr dma_base,
lance = SYSBUS_PCNET(object_resolve_path_component(
OBJECT(ledma), "lance"));
+ qdev_set_nic_properties(DEVICE(lance), nd);
+
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dma), &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, dma_base);
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(esp), 0, esp_base);
+ scsi_bus_legacy_handle_cmdline(&esp->esp.bus);
+
sysbus_mmio_map(SYS_BUS_DEVICE(lance), 0, le_base);
return dma;
@@ -850,6 +853,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
unsigned int max_cpus = machine->smp.max_cpus;
Object *ram_memdev = object_resolve_path_type(machine->ram_memdev_id,
TYPE_MEMORY_BACKEND, NULL);
+ NICInfo *nd = &nd_table[0];
if (machine->ram_size > hwdef->max_mem) {
error_report("Too much memory for this machine: %" PRId64 ","
@@ -910,9 +914,10 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
hwdef->iommu_pad_base, hwdef->iommu_pad_len);
}
+ qemu_check_nic_model(nd, TYPE_LANCE);
sparc32_dma_init(hwdef->dma_base,
hwdef->esp_base, slavio_irq[18],
- hwdef->le_base, slavio_irq[16]);
+ hwdef->le_base, slavio_irq[16], nd);
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
@@ -1049,7 +1054,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
machine->initrd_filename,
machine->ram_size, &initrd_size);
- nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, machine->kernel_cmdline,
+ nvram_init(nvram, (uint8_t *)&nd->macaddr, machine->kernel_cmdline,
machine->boot_order, machine->ram_size, kernel_size,
graphic_width, graphic_height, graphic_depth,
hwdef->nvram_machine_id, "Sun4m");
--
2.20.1
- [PULL 00/10] qemu-sparc queue 20201028, Mark Cave-Ayland, 2020/10/28
- [PULL 01/10] sparc32-dma: use object_initialize_child() for espdma and ledma child objects, Mark Cave-Ayland, 2020/10/28
- [PULL 02/10] sparc32-ledma: use object_initialize_child() for lance child object, Mark Cave-Ayland, 2020/10/28
- [PULL 03/10] sparc32-espdma: use object_initialize_child() for esp child object, Mark Cave-Ayland, 2020/10/28
- [PULL 04/10] sparc32-ledma: don't reference nd_table directly within the device,
Mark Cave-Ayland <=
- [PULL 05/10] sabre: don't call sysbus_mmio_map() in sabre_realize(), Mark Cave-Ayland, 2020/10/28
- [PULL 06/10] hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter, Mark Cave-Ayland, 2020/10/28
- [PULL 07/10] sabre: increase number of PCI bus IRQs from 32 to 64, Mark Cave-Ayland, 2020/10/28
- [PULL 08/10] hw/pci-host/sabre: Update documentation link, Mark Cave-Ayland, 2020/10/28
- [PULL 09/10] hw/pci-host/sabre: Remove superfluous address range check, Mark Cave-Ayland, 2020/10/28
- [PULL 10/10] hw/pci-host/sabre: Simplify code initializing variable once, Mark Cave-Ayland, 2020/10/28
- Re: [PULL 00/10] qemu-sparc queue 20201028, Peter Maydell, 2020/10/31