qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: scripts/gdb: issues when loading modules after lx-symbols


From: Jan Kiszka
Subject: Re: scripts/gdb: issues when loading modules after lx-symbols
Date: Sun, 4 Oct 2020 20:52:37 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.12.0

On 01.10.20 16:31, Stefano Garzarella wrote:
> Hi,
> I had some issues with gdb scripts and kernel modules in Linux 5.9-rc7.
> 
> If the modules are already loaded, and I do 'lx-symbols', all work fine.
> But, if I load a kernel module after 'lx-symbols', I had this issue:
> 
> [ 5093.393940] invalid opcode: 0000 [#1] SMP PTI
> [ 5093.395134] CPU: 0 PID: 576 Comm: modprobe Not tainted 
> 5.9.0-rc7-ste-00010-gf0b671d9608d-dirty #2
> [ 5093.397566] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 
> 1.13.0-2.fc32 04/01/2014
> [ 5093.400761] RIP: 0010:do_init_module+0x1/0x270
> [ 5093.402553] Code: ff ff e9 cf fe ff ff 0f 0b 49 c7 c4 f2 ff ff ff e9 c1 fe 
> ff ff e8 5f b2 65 00 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 cc <1f> 44 
> 00 00 55 ba 10 00 00 00 be c0 0c 00 00 48 89 e5 41 56 41 55
> [ 5093.409505] RSP: 0018:ffffc90000563d18 EFLAGS: 00010246
> [ 5093.412056] RAX: 0000000000000000 RBX: ffffffffc010a0c0 RCX: 
> 0000000000004ee3
> [ 5093.414472] RDX: 0000000000004ee2 RSI: ffffea0001efe188 RDI: 
> ffffffffc010a0c0
> [ 5093.416349] RBP: ffffc90000563e50 R08: 0000000000000000 R09: 
> 0000000000000002
> [ 5093.418044] R10: 0000000000000096 R11: 00000000000008a4 R12: 
> ffff88807a0d1280
> [ 5093.424721] R13: ffffffffc010a110 R14: ffff88807a0d1300 R15: 
> ffffc90000563e70
> [ 5093.427138] FS:  00007f018f632740(0000) GS:ffff88807dc00000(0000) 
> knlGS:0000000000000000
> [ 5093.430037] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 5093.432279] CR2: 000055fbe282b239 CR3: 000000007922a006 CR4: 
> 0000000000170ef0
> [ 5093.435096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
> 0000000000000000
> [ 5093.436765] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 
> 0000000000000400
> [ 5093.439689] Call Trace:
> [ 5093.440954]  ? load_module+0x24b6/0x27d0
> [ 5093.443212]  ? __kernel_read+0xd6/0x150
> [ 5093.445140]  __do_sys_finit_module+0xd3/0xf0
> [ 5093.446877]  __x64_sys_finit_module+0x1a/0x20
> [ 5093.449098]  do_syscall_64+0x38/0x50
> [ 5093.450877]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [ 5093.456153] RIP: 0033:0x7f018f75c43d
> [ 5093.457728] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 
> f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 
> 01 f0 ff ff 73 01 c3 48 8b 0d 2b 6a 0c 00 f7 d8 64 89 01 48
> [ 5093.466349] RSP: 002b:00007ffd7f080368 EFLAGS: 00000246 ORIG_RAX: 
> 0000000000000139
> [ 5093.470613] RAX: ffffffffffffffda RBX: 0000557e5c96f9c0 RCX: 
> 00007f018f75c43d
> [ 5093.474747] RDX: 0000000000000000 RSI: 0000557e5c964288 RDI: 
> 0000000000000003
> [ 5093.478049] RBP: 0000000000040000 R08: 0000000000000000 R09: 
> 0000000000000000
> [ 5093.481298] R10: 0000000000000003 R11: 0000000000000246 R12: 
> 0000000000000000
> [ 5093.483725] R13: 0000557e5c964288 R14: 0000557e5c96f950 R15: 
> 0000557e5c9775c0
> [ 5093.485778] Modules linked in: virtio_vdpa(+) vdpa sunrpc kvm_intel kvm 
> irqbypass virtio_blk virtio_rng rng_core [last unloaded: virtio_vdpa]
> [ 5093.488695] ---[ end trace 23712ecebc11f53c ]---
> 
> Guest kernel: Linux 5.9-rc7
> gdb: GNU gdb (GDB) Fedora 9.1-6.fc32
> I tried with QEMU 4.2.1 and the latest master branch: same issue.
> 
> 
> I did some digging, and skipping the gdb 'add-symbol-file' command in 
> symbol.py
> avoid the issue, but of course I don't have the symbols loaded:
> 
>     diff --git a/scripts/gdb/linux/symbols.py b/scripts/gdb/linux/symbols.py
>     index 1be9763cf8bb..eadfaa4d4907 100644
>     --- a/scripts/gdb/linux/symbols.py
>     +++ b/scripts/gdb/linux/symbols.py
>     @@ -129,7 +129,7 @@ lx-symbols command."""
>                      filename=module_file,
>                      addr=module_addr,
>                      sections=self._section_arguments(module))
>     -            gdb.execute(cmdline, to_string=True)
>     +            #gdb.execute(cmdline, to_string=True)
>                  if module_name not in self.loaded_modules:
>                      self.loaded_modules.append(module_name)
>              else:
> 
> I tried several modules and this happens every time after '(gdb) lx-symbols'.
> 
> Do you have any hints?
> 
I assume you are debugging a kernel inside QEMU/KVM, right? Does it work
without -enable-kvm?

Debugging guests in KVM mode at least was unstable for a long time. I
avoided setting soft-BPs - which is what the script does for the sake of
tracking modules loading -, falling back to hw-BPs, as I had no time to
debug that further. /Maybe/ that's the issue here.

Jan

-- 
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux



reply via email to

[Prev in Thread] Current Thread [Next in Thread]