[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v30 21/22] BootLinuxConsoleTest: Test the RX-Virt machine
From: |
Yoshinori Sato |
Subject: |
[PATCH v30 21/22] BootLinuxConsoleTest: Test the RX-Virt machine |
Date: |
Wed, 12 Feb 2020 22:03:10 +0900 |
From: Philippe Mathieu-Daudé <address@hidden>
Add two tests for the rx-virt machine, based on the recommended test
setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
- U-Boot prompt
- Linux kernel with Sash shell
These are very quick tests:
$ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG :
/home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
(1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot:
PASS (0.11 s)
(2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux:
PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 |
CANCEL 0
Tests can also be run with:
$ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06
+0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0
20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a
sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a
sci
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Based-on: address@hidden
"RX architecture support"
Signed-off-by: Yoshinori Sato <address@hidden>
---
tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py
b/tests/acceptance/boot_linux_console.py
index 34d37eba3b..367cf480a5 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -686,3 +686,49 @@ class BootLinuxConsole(Test):
tar_hash = '49e88d9933742f0164b60839886c9739cb7a0d34'
self.vm.add_args('-cpu', 'dc233c')
self.do_test_advcal_2018('02', tar_hash, 'santas-sleigh-ride.elf')
+
+ def test_rx_uboot(self):
+ """
+ :avocado: tags=arch:rx
+ :avocado: tags=machine:rx-virt
+ :avocado: tags=endian:little
+ """
+ uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
+ uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
+ uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
+ uboot_path = archive.uncompress(uboot_path, self.workdir)
+
+ self.vm.set_machine('rx-virt')
+ self.vm.set_console()
+ self.vm.add_args('-bios', uboot_path,
+ '-no-reboot')
+ self.vm.launch()
+ uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
+ self.wait_for_console_pattern(uboot_version)
+ gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105
(experimental)'
+ # FIXME limit baudrate on chardev, else we type too fast
+ #self.exec_command_and_wait_for_pattern('version', gcc_version)
+
+ def test_rx_linux(self):
+ """
+ :avocado: tags=arch:rx
+ :avocado: tags=machine:rx-virt
+ :avocado: tags=endian:little
+ """
+ dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
+ dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
+ dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
+ kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
+ kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
+ kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
+
+ self.vm.set_machine('rx-virt')
+ self.vm.set_console()
+ kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-no-reboot')
+ self.vm.launch()
+ self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
+ self.exec_command_and_wait_for_pattern('printenv',
+ 'TERM=linux')
--
2.20.1
- [PATCH v30 10/22] target/rx: Use prt_ldmi for XCHG_mr disassembly, (continued)
- [PATCH v30 10/22] target/rx: Use prt_ldmi for XCHG_mr disassembly, Yoshinori Sato, 2020/02/12
- [PATCH v30 22/22] qemu-doc.texi: Add RX section., Yoshinori Sato, 2020/02/12
- [PATCH v30 14/22] hw/intc: RX62N interrupt controller (ICUa), Yoshinori Sato, 2020/02/12
- [PATCH v30 02/22] qemu/bitops.h: Add extract8 and extract16, Yoshinori Sato, 2020/02/12
- [PATCH v30 04/22] target/rx: TCG translation, Yoshinori Sato, 2020/02/12
- [PATCH v30 09/22] target/rx: Replace operand with prt_ldmi in disassembler, Yoshinori Sato, 2020/02/12
- [PATCH v30 19/22] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core, Yoshinori Sato, 2020/02/12
- [PATCH v30 08/22] target/rx: Disassemble rx_index_addr into a string, Yoshinori Sato, 2020/02/12
- [PATCH v30 07/22] target/rx: RX disassembler, Yoshinori Sato, 2020/02/12
- [PATCH v30 15/22] hw/timer: RX62N internal timer modules, Yoshinori Sato, 2020/02/12
- [PATCH v30 21/22] BootLinuxConsoleTest: Test the RX-Virt machine,
Yoshinori Sato <=
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12
- Re: [PATCH v30 00/22] Add RX archtecture support, no-reply, 2020/02/12