[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging
From: |
Peter Maydell |
Subject: |
[PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging |
Date: |
Mon, 14 Oct 2019 17:04:00 +0100 |
From: Philippe Mathieu-Daudé <address@hidden>
Various logging improvements as once:
- Use 0x prefix for hex numbers
- Display value written during write accesses
- Move some logs from GUEST_ERROR to UNIMP
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
Reviewed-by: Cleber Rosa <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
hw/char/bcm2835_aux.c | 5 +++--
hw/dma/bcm2835_dma.c | 8 ++++----
hw/intc/bcm2836_control.c | 7 ++++---
hw/misc/bcm2835_mbox.c | 7 ++++---
hw/misc/bcm2835_property.c | 16 ++++++++++------
5 files changed, 25 insertions(+), 18 deletions(-)
diff --git a/hw/char/bcm2835_aux.c b/hw/char/bcm2835_aux.c
index 3f855196e3a..a6fc1bf152b 100644
--- a/hw/char/bcm2835_aux.c
+++ b/hw/char/bcm2835_aux.c
@@ -162,8 +162,9 @@ static void bcm2835_aux_write(void *opaque, hwaddr offset,
uint64_t value,
switch (offset) {
case AUX_ENABLES:
if (value != 1) {
- qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI "
- "or disable UART\n", __func__);
+ qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI"
+ " or disable UART: 0x%"PRIx64"\n",
+ __func__, value);
}
break;
diff --git a/hw/dma/bcm2835_dma.c b/hw/dma/bcm2835_dma.c
index 192bd377a00..6acc2b644ec 100644
--- a/hw/dma/bcm2835_dma.c
+++ b/hw/dma/bcm2835_dma.c
@@ -180,7 +180,7 @@ static uint64_t bcm2835_dma_read(BCM2835DMAState *s, hwaddr
offset,
res = ch->debug;
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
break;
}
@@ -228,7 +228,7 @@ static void bcm2835_dma_write(BCM2835DMAState *s, hwaddr
offset,
ch->debug = value;
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
break;
}
@@ -247,7 +247,7 @@ static uint64_t bcm2835_dma0_read(void *opaque, hwaddr
offset, unsigned size)
case BCM2708_DMA_ENABLE:
return s->enable;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
return 0;
}
@@ -274,7 +274,7 @@ static void bcm2835_dma0_write(void *opaque, hwaddr offset,
uint64_t value,
s->enable = (value & 0xffff);
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
}
}
diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c
index 04229b8a17e..61f884ff9e7 100644
--- a/hw/intc/bcm2836_control.c
+++ b/hw/intc/bcm2836_control.c
@@ -264,7 +264,7 @@ static uint64_t bcm2836_control_read(void *opaque, hwaddr
offset, unsigned size)
} else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
return s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2];
} else {
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
return 0;
}
@@ -293,8 +293,9 @@ static void bcm2836_control_write(void *opaque, hwaddr
offset,
} else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) {
s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val;
} else {
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
- __func__, offset);
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx
+ " value 0x%"PRIx64"\n",
+ __func__, offset, val);
return;
}
diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c
index 79bad116311..7690b9afaf8 100644
--- a/hw/misc/bcm2835_mbox.c
+++ b/hw/misc/bcm2835_mbox.c
@@ -176,7 +176,7 @@ static uint64_t bcm2835_mbox_read(void *opaque, hwaddr
offset, unsigned size)
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n",
__func__, offset);
return 0;
}
@@ -228,8 +228,9 @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset,
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
- __func__, offset);
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx
+ " value 0x%"PRIx64"\n",
+ __func__, offset, value);
return;
}
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index d86d510572a..0a1a3eb5d92 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -56,7 +56,8 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
break;
case 0x00010001: /* Get board model */
qemu_log_mask(LOG_UNIMP,
- "bcm2835_property: %x get board model NYI\n", tag);
+ "bcm2835_property: 0x%08x get board model NYI\n",
+ tag);
resplen = 4;
break;
case 0x00010002: /* Get board revision */
@@ -69,7 +70,8 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
break;
case 0x00010004: /* Get board serial */
qemu_log_mask(LOG_UNIMP,
- "bcm2835_property: %x get board serial NYI\n", tag);
+ "bcm2835_property: 0x%08x get board serial NYI\n",
+ tag);
resplen = 8;
break;
case 0x00010005: /* Get ARM memory */
@@ -104,7 +106,8 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
case 0x00038001: /* Set clock state */
qemu_log_mask(LOG_UNIMP,
- "bcm2835_property: %x set clock state NYI\n", tag);
+ "bcm2835_property: 0x%08x set clock state NYI\n",
+ tag);
resplen = 8;
break;
@@ -129,7 +132,8 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
case 0x00038004: /* Set max clock rate */
case 0x00038007: /* Set min clock rate */
qemu_log_mask(LOG_UNIMP,
- "bcm2835_property: %x set clock rates NYI\n", tag);
+ "bcm2835_property: 0x%08x set clock rate NYI\n",
+ tag);
resplen = 8;
break;
@@ -274,8 +278,8 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
break;
default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "bcm2835_property: unhandled tag %08x\n", tag);
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: unhandled tag 0x%08x\n", tag);
break;
}
--
2.20.1
- [PULL 55/68] aspeed/i2c: Add AST2600 support, (continued)
- [PULL 55/68] aspeed/i2c: Add AST2600 support, Peter Maydell, 2019/10/14
- [PULL 54/68] aspeed/i2c: Introduce an object class per SoC, Peter Maydell, 2019/10/14
- [PULL 58/68] m25p80: Add support for w25q512jv, Peter Maydell, 2019/10/14
- [PULL 59/68] aspeed: Add an AST2600 eval board, Peter Maydell, 2019/10/14
- [PULL 56/68] aspeed: Introduce an object class per SoC, Peter Maydell, 2019/10/14
- [PULL 57/68] aspeed/soc: Add AST2600 support, Peter Maydell, 2019/10/14
- [PULL 60/68] aspeed: Parameterise number of MACs, Peter Maydell, 2019/10/14
- [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600, Peter Maydell, 2019/10/14
- [PULL 62/68] aspeed/soc: Add ASPEED Video stub, Peter Maydell, 2019/10/14
- [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions, Peter Maydell, 2019/10/14
- [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging,
Peter Maydell <=
- [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces, Peter Maydell, 2019/10/14
- [PULL 66/68] hw/arm/bcm2835: Rename some definitions, Peter Maydell, 2019/10/14
- [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events, Peter Maydell, 2019/10/14
- [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals, Peter Maydell, 2019/10/14