[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 6/9] target-avr: adding helpers for IN, OUT,
From: |
Richard Henderson |
Subject: |
Re: [Qemu-devel] [PATCH v4 6/9] target-avr: adding helpers for IN, OUT, SLEEP, WBR & unsupported instructions |
Date: |
Mon, 6 Jun 2016 14:58:16 -0700 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.1.0 |
On 06/06/2016 03:37 AM, Michael Rolnik wrote:
Signed-off-by: Michael Rolnik <address@hidden>
---
target-avr/helper.c | 153 ++++++++++++++++++++++++++++++++++++++++++++++++----
target-avr/helper.h | 5 ++
2 files changed, 147 insertions(+), 11 deletions(-)
diff --git a/target-avr/helper.c b/target-avr/helper.c
index e798dd9..f514ed6 100644
--- a/target-avr/helper.c
+++ b/target-avr/helper.c
@@ -31,7 +31,7 @@
bool avr_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
{
- CPUClass *cc = CPU_GET_CLASS(cs);
+ CPUClass *cc = CPU_GET_CLASS(cs);
AVRCPU *cpu = AVR_CPU(cs);
CPUAVRState *env = &cpu->env;
@@ -49,7 +49,7 @@ bool avr_cpu_exec_interrupt(CPUState *cs, int
interrupt_request)
}
if (interrupt_request & CPU_INTERRUPT_HARD) {
if (cpu_interrupts_enabled(env) && env->intsrc != 0) {
- int index = ctz32(env->intsrc);
+ int index = ctz32(env->intsrc);
cs->exception_index = EXCP_INT(index);
cc->do_interrupt(cs);
@@ -64,18 +64,18 @@ bool avr_cpu_exec_interrupt(CPUState *cs, int
interrupt_request)
void avr_cpu_do_interrupt(CPUState *cs)
{
- AVRCPU *cpu = AVR_CPU(cs);
- CPUAVRState *env = &cpu->env;
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
- uint32_t ret = env->pc;
- int vector;
- int size = avr_feature(env, AVR_FEATURE_JMP_CALL) ? 2 : 1;
- int base = 0; /* TODO: where to get it */
+ uint32_t ret = env->pc;
+ int vector = 0;
+ int size = avr_feature(env, AVR_FEATURE_JMP_CALL) ? 2 : 1;
+ int base = 0; /* TODO: where to get it */
if (cs->exception_index == EXCP_RESET) {
- vector = 0;
+ vector = 0;
} else if (env->intsrc != 0) {
- vector = ctz32(env->intsrc) + 1;
+ vector = ctz32(env->intsrc) + 1;
}
if (avr_feature(env, AVR_FEATURE_3_BYTE_PC)) {
@@ -90,7 +90,7 @@ void avr_cpu_do_interrupt(CPUState *cs)
}
env->pc = base + vector * size;
- env->sregI = 0; /* clear Global Interrupt Flag */
+ env->sregI = 0; /* clear Global Interrupt Flag */
cs->exception_index = -1;
}
Fold all of these whitespace changes into the original patch.
}
+void helper_sleep(CPUAVRState *env)
Spacing.
+}
+void helper_unsupported(CPUAVRState *env)
Spacing.
+{
+ CPUState *cs = CPU(avr_env_get_cpu(env));
+
+ cs->exception_index = EXCP_DEBUG;
+ cpu_dump_state(cs, stderr, fprintf, 0);
if (qemu_loglevel_mask(LOG_UNIMP))
{
qemu_log("UNSUPPORTED\n");
cpu_dump_state(cs, qemu_logfile, fprintf, 0);
}
You also should be using something other than EXCP_DEBUG.
+void helper_wdr(CPUAVRState *env)
+{
+ CPUState *cs = CPU(avr_env_get_cpu(env));
+
+ cs->exception_index = EXCP_DEBUG;
Likewise.
+ sreg = (env->sregC & 0x01) << 0
+ | (env->sregZ & 0x01) << 1
+ | (env->sregN & 0x01) << 2
+ | (env->sregV & 0x01) << 3
+ | (env->sregS & 0x01) << 4
+ | (env->sregH & 0x01) << 5
+ | (env->sregT & 0x01) << 6
+ | (env->sregI & 0x01) << 7;
Same bug with sregZ.
+ case 0x3d: { /* SPL */
+ if (avr_feature(env, AVR_FEATURE_2_BYTE_SP)) {
+ env->sp = (env->sp & 0xff00) | (data);
+ }
+ break;
Surely you should write to the low byte of SP all the time. How else do you
change SPL when you have a one-byte stack pointer?
+ case 0x3f: { /* SREG */
+ env->sregC = (data >> 0) & 0x01;
+ env->sregZ = (data >> 1) & 0x01;
+ env->sregN = (data >> 2) & 0x01;
+ env->sregV = (data >> 3) & 0x01;
+ env->sregS = (data >> 4) & 0x01;
+ env->sregH = (data >> 5) & 0x01;
+ env->sregT = (data >> 6) & 0x01;
+ env->sregI = (data >> 7) & 0x01;
Same bug with sregZ.
r~
- Re: [Qemu-devel] [PATCH v4 1/9] target-avr: AVR cores support is added. 1. basic CPU structure 2. registers 3. no instructions, (continued)
- Message not available
- Re: [Qemu-devel] [PATCH v4 6/9] target-avr: adding helpers for IN, OUT, SLEEP, WBR & unsupported instructions,
Richard Henderson <=