[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 10/18] linux-user: Use safe_syscall wrapper for epol
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PATCH 10/18] linux-user: Use safe_syscall wrapper for epoll_wait syscalls |
Date: |
Mon, 6 Jun 2016 19:58:11 +0100 |
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.
Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: Peter Maydell <address@hidden>
---
configure | 21 ++-------------------
linux-user/syscall.c | 18 ++++++++++--------
2 files changed, 12 insertions(+), 27 deletions(-)
diff --git a/configure b/configure
index b5aab72..93f8739 100755
--- a/configure
+++ b/configure
@@ -3798,8 +3798,8 @@ if compile_prog "" "" ; then
epoll=yes
fi
-# epoll_create1 and epoll_pwait are later additions
-# so we must check separately for their presence
+# epoll_create1 is a later addition
+# so we must check separately for its presence
epoll_create1=no
cat > $TMPC << EOF
#include <sys/epoll.h>
@@ -3821,20 +3821,6 @@ if compile_prog "" "" ; then
epoll_create1=yes
fi
-epoll_pwait=no
-cat > $TMPC << EOF
-#include <sys/epoll.h>
-
-int main(void)
-{
- epoll_pwait(0, 0, 0, 0, 0);
- return 0;
-}
-EOF
-if compile_prog "" "" ; then
- epoll_pwait=yes
-fi
-
# check for sendfile support
sendfile=no
cat > $TMPC << EOF
@@ -5114,9 +5100,6 @@ fi
if test "$epoll_create1" = "yes" ; then
echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
fi
-if test "$epoll_pwait" = "yes" ; then
- echo "CONFIG_EPOLL_PWAIT=y" >> $config_host_mak
-fi
if test "$sendfile" = "yes" ; then
echo "CONFIG_SENDFILE=y" >> $config_host_mak
fi
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index f1cf809..d40d1a7 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -686,6 +686,9 @@ safe_syscall6(int, pselect6, int, nfds, fd_set *, readfds,
fd_set *, writefds, \
safe_syscall5(int, ppoll, struct pollfd *, ufds, unsigned int, nfds,
struct timespec *, tsp, const sigset_t *, sigmask,
size_t, sigsetsize)
+safe_syscall6(int, epoll_pwait, int, epfd, struct epoll_event *, events,
+ int, maxevents, int, timeout, const sigset_t *, sigmask,
+ size_t, sigsetsize)
safe_syscall6(int,futex,int *,uaddr,int,op,int,val, \
const struct timespec *,timeout,int *,uaddr2,int,val3)
safe_syscall2(int, rt_sigsuspend, sigset_t *, newset, size_t, sigsetsize)
@@ -10194,14 +10197,11 @@ abi_long do_syscall(void *cpu_env, int num, abi_long
arg1,
}
#endif
-#if defined(TARGET_NR_epoll_pwait) && defined(CONFIG_EPOLL_PWAIT)
-#define IMPLEMENT_EPOLL_PWAIT
-#endif
-#if defined(TARGET_NR_epoll_wait) || defined(IMPLEMENT_EPOLL_PWAIT)
+#if defined(TARGET_NR_epoll_wait) || defined(TARGET_NR_epoll_pwait)
#if defined(TARGET_NR_epoll_wait)
case TARGET_NR_epoll_wait:
#endif
-#if defined(IMPLEMENT_EPOLL_PWAIT)
+#if defined(TARGET_NR_epoll_pwait)
case TARGET_NR_epoll_pwait:
#endif
{
@@ -10220,7 +10220,7 @@ abi_long do_syscall(void *cpu_env, int num, abi_long
arg1,
ep = alloca(maxevents * sizeof(struct epoll_event));
switch (num) {
-#if defined(IMPLEMENT_EPOLL_PWAIT)
+#if defined(TARGET_NR_epoll_pwait)
case TARGET_NR_epoll_pwait:
{
target_sigset_t *target_set;
@@ -10239,13 +10239,15 @@ abi_long do_syscall(void *cpu_env, int num, abi_long
arg1,
set = NULL;
}
- ret = get_errno(epoll_pwait(epfd, ep, maxevents, timeout, set));
+ ret = get_errno(safe_epoll_pwait(epfd, ep, maxevents, timeout,
+ set, SIGSET_T_SIZE));
break;
}
#endif
#if defined(TARGET_NR_epoll_wait)
case TARGET_NR_epoll_wait:
- ret = get_errno(epoll_wait(epfd, ep, maxevents, timeout));
+ ret = get_errno(safe_epoll_pwait(epfd, ep, maxevents, timeout,
+ NULL, 0));
break;
#endif
default:
--
1.9.1
- [Qemu-devel] [PATCH 09/18] linux-user: Use safe_syscall wrapper for poll and ppoll syscalls, (continued)
- [Qemu-devel] [PATCH 09/18] linux-user: Use safe_syscall wrapper for poll and ppoll syscalls, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 13/18] linux-user: Use safe_syscall wrapper for ioctl, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 15/18] linux-user: Correct signedness of target_flock l_start and l_len fields, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 11/18] linux-user: Use safe_syscall wrapper for semop, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 17/18] linux-user: Make target_strerror() return 'const char *', Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 01/18] linux-user: Use safe_syscall wrapper for readv and writev syscalls, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 16/18] linux-user: Use safe_syscall wrapper for fcntl, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 12/18] linux-user: Use safe_syscall wrapper for accept and accept4 syscalls, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 10/18] linux-user: Use safe_syscall wrapper for epoll_wait syscalls,
Peter Maydell <=
- [Qemu-devel] [PATCH 14/18] linux-user: Use __get_user() and __put_user() to handle structs in do_fcntl(), Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 08/18] linux-user: Use safe_syscall wrapper for sleep syscalls, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 05/18] linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 03/18] linux-user: Use safe_syscall wrapper for send* and recv* syscalls, Peter Maydell, 2016/06/06
- [Qemu-devel] [PATCH 18/18] linux-user: Special-case ERESTARTSYS in target_strerror(), Peter Maydell, 2016/06/06