Re: [Qemu-devel] [PATCH v5 30/45] Postcopy: Postcopy startup in migration thread

[David Gibson]

On Wed, Feb 25, 2015 at 04:51:53PM +0000, Dr. David Alan Gilbert (git) wrote:
> From: "Dr. David Alan Gilbert" <address@hidden>
> 
> Rework the migration thread to setup and start postcopy.
> 
> Signed-off-by: Dr. David Alan Gilbert <address@hidden>
> ---
>  include/migration/migration.h |   3 +
>  migration/migration.c         | 161 
> ++++++++++++++++++++++++++++++++++++++++--
>  trace-events                  |   4 ++
>  3 files changed, 164 insertions(+), 4 deletions(-)
> 
> diff --git a/include/migration/migration.h b/include/migration/migration.h
> index 821d561..2c607e7 100644
> --- a/include/migration/migration.h
> +++ b/include/migration/migration.h
> @@ -131,6 +131,9 @@ struct MigrationState
>      /* Flag set once the migration has been asked to enter postcopy */
>      bool start_postcopy;
>  
> +    /* Flag set once the migration thread is running (and needs joining) */
> +    bool started_migration_thread;
> +
>      /* bitmap of pages that have been sent at least once
>       * only maintained and used in postcopy at the moment
>       * where it's used to send the dirtymap at the start
> diff --git a/migration/migration.c b/migration/migration.c
> index b1ad7b1..6bf9c8d 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -468,7 +468,10 @@ static void migrate_fd_cleanup(void *opaque)
>      if (s->file) {
>          trace_migrate_fd_cleanup();
>          qemu_mutex_unlock_iothread();
> -        qemu_thread_join(&s->thread);
> +        if (s->started_migration_thread) {
> +            qemu_thread_join(&s->thread);
> +            s->started_migration_thread = false;
> +        }
>          qemu_mutex_lock_iothread();
>  
>          qemu_fclose(s->file);
> @@ -874,7 +877,6 @@ out:
>      return NULL;
>  }
>  
> -__attribute__ (( unused )) /* Until later in patch series */
>  static int open_outgoing_return_path(MigrationState *ms)
>  {
>  
> @@ -911,23 +913,141 @@ static void 
> await_outgoing_return_path_close(MigrationState *ms)
>  }
>  
>  /*
> + * Switch from normal iteration to postcopy
> + * Returns non-0 on error
> + */
> +static int postcopy_start(MigrationState *ms, bool *old_vm_running)
> +{
> +    int ret;
> +    const QEMUSizedBuffer *qsb;
> +    int64_t time_at_stop = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> +    migrate_set_state(ms, MIG_STATE_ACTIVE, MIG_STATE_POSTCOPY_ACTIVE);
> +
> +    trace_postcopy_start();
> +    qemu_mutex_lock_iothread();
> +    trace_postcopy_start_set_run();
> +
> +    qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> +    *old_vm_running = runstate_is_running();

I think that needs some explanation.  Why are you doing a wakeup on
the source host?


> +    ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
> +
> +    if (ret < 0) {
> +        goto fail;
> +    }
> +
> +    /*
> +     * in Finish migrate and with the io-lock held everything should
> +     * be quiet, but we've potentially still got dirty pages and we
> +     * need to tell the destination to throw any pages it's already received
> +     * that are dirty
> +     */
> +    if (ram_postcopy_send_discard_bitmap(ms)) {
> +        error_report("postcopy send discard bitmap failed");
> +        goto fail;
> +    }
> +
> +    /*
> +     * send rest of state - note things that are doing postcopy
> +     * will notice we're in MIG_STATE_POSTCOPY_ACTIVE and not actually
> +     * wrap their state up here
> +     */
> +    qemu_file_set_rate_limit(ms->file, INT64_MAX);
> +    /* Ping just for debugging, helps line traces up */
> +    qemu_savevm_send_ping(ms->file, 2);
> +
> +    /*
> +     * We need to leave the fd free for page transfers during the
> +     * loading of the device state, so wrap all the remaining
> +     * commands and state into a package that gets sent in one go
> +     */
> +    QEMUFile *fb = qemu_bufopen("w", NULL);
> +    if (!fb) {
> +        error_report("Failed to create buffered file");
> +        goto fail;
> +    }
> +
> +    qemu_savevm_state_complete(fb);
> +    qemu_savevm_send_ping(fb, 3);
> +
> +    qemu_savevm_send_postcopy_run(fb);
> +
> +    /* <><> end of stuff going into the package */
> +    qsb = qemu_buf_get(fb);
> +
> +    /* Now send that blob */
> +    if (qsb_get_length(qsb) > MAX_VM_CMD_PACKAGED_SIZE) {
> +        error_report("postcopy_start: Unreasonably large packaged state: 
> %lu",
> +                     (unsigned long)(qsb_get_length(qsb)));
> +        goto fail_closefb;
> +    }
> +    qemu_savevm_send_packaged(ms->file, qsb);
> +    qemu_fclose(fb);
> +    ms->downtime =  qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - time_at_stop;
> +
> +    qemu_mutex_unlock_iothread();
> +
> +    /*
> +     * Although this ping is just for debug, it could potentially be
> +     * used for getting a better measurement of downtime at the source.
> +     */
> +    qemu_savevm_send_ping(ms->file, 4);
> +
> +    ret = qemu_file_get_error(ms->file);
> +    if (ret) {
> +        error_report("postcopy_start: Migration stream errored");
> +        migrate_set_state(ms, MIG_STATE_POSTCOPY_ACTIVE, MIG_STATE_ERROR);
> +    }
> +
> +    return ret;
> +
> +fail_closefb:
> +    qemu_fclose(fb);
> +fail:
> +    migrate_set_state(ms, MIG_STATE_POSTCOPY_ACTIVE, MIG_STATE_ERROR);
> +    qemu_mutex_unlock_iothread();
> +    return -1;
> +}
> +
> +/*
>   * Master migration thread on the source VM.
>   * It drives the migration and pumps the data down the outgoing channel.
>   */
>  static void *migration_thread(void *opaque)
>  {
>      MigrationState *s = opaque;
> +    /* Used by the bandwidth calcs, updated later */
>      int64_t initial_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
>      int64_t setup_start = qemu_clock_get_ms(QEMU_CLOCK_HOST);
>      int64_t initial_bytes = 0;
>      int64_t max_size = 0;
>      int64_t start_time = initial_time;
>      bool old_vm_running = false;
> +    bool entered_postcopy = false;
> +    /* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
> +    enum MigrationPhase current_active_type = MIG_STATE_ACTIVE;
>  
>      qemu_savevm_state_header(s->file);
> +
> +    if (migrate_postcopy_ram()) {
> +        /* Now tell the dest that it should open its end so it can reply */
> +        qemu_savevm_send_open_return_path(s->file);
> +
> +        /* And do a ping that will make stuff easier to debug */
> +        qemu_savevm_send_ping(s->file, 1);
> +
> +        /*
> +         * Tell the destination that we *might* want to do postcopy later;
> +         * if the other end can't do postcopy it should fail now, nice and
> +         * early.
> +         */
> +        qemu_savevm_send_postcopy_advise(s->file);
> +    }
> +
>      qemu_savevm_state_begin(s->file, &s->params);
>  
>      s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
> +    current_active_type = MIG_STATE_ACTIVE;
>      migrate_set_state(s, MIG_STATE_SETUP, MIG_STATE_ACTIVE);
>  
>      trace_migration_thread_setup_complete();
> @@ -946,6 +1066,22 @@ static void *migration_thread(void *opaque)
>              trace_migrate_pending(pending_size, max_size,
>                                    pend_post, pend_nonpost);
>              if (pending_size && pending_size >= max_size) {
> +                /* Still a significant amount to transfer */
> +
> +                current_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> +                if (migrate_postcopy_ram() &&
> +                    s->state != MIG_STATE_POSTCOPY_ACTIVE &&
> +                    pend_nonpost <= max_size &&
> +                    atomic_read(&s->start_postcopy)) {
> +
> +                    if (!postcopy_start(s, &old_vm_running)) {
> +                        current_active_type = MIG_STATE_POSTCOPY_ACTIVE;
> +                        entered_postcopy = true;

Do you need entered_postcopy, or could you just use the existing
MIG_STATE variable?

> +                    }
> +
> +                    continue;
> +                }
> +                /* Just another iteration step */
>                  qemu_savevm_state_iterate(s->file);
>              } else {
>                  int ret;
> @@ -975,7 +1111,8 @@ static void *migration_thread(void *opaque)
>          }
>  
>          if (qemu_file_get_error(s->file)) {
> -            migrate_set_state(s, MIG_STATE_ACTIVE, MIG_STATE_ERROR);
> +            migrate_set_state(s, current_active_type, MIG_STATE_ERROR);
> +            trace_migration_thread_file_err();
>              break;
>          }
>          current_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> @@ -1006,12 +1143,15 @@ static void *migration_thread(void *opaque)
>          }
>      }
>  
> +    trace_migration_thread_after_loop();
>      qemu_mutex_lock_iothread();
>      if (s->state == MIG_STATE_COMPLETED) {
>          int64_t end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
>          uint64_t transferred_bytes = qemu_ftell(s->file);
>          s->total_time = end_time - s->total_time;
> -        s->downtime = end_time - start_time;
> +        if (!entered_postcopy) {
> +            s->downtime = end_time - start_time;
> +        }
>          if (s->total_time) {
>              s->mbps = (((double) transferred_bytes * 8.0) /
>                         ((double) s->total_time)) / 1000;
> @@ -1043,8 +1183,21 @@ void migrate_fd_connect(MigrationState *s)
>      /* Notify before starting migration thread */
>      notifier_list_notify(&migration_state_notifiers, s);
>  
> +    /* Open the return path; currently for postcopy but other things might
> +     * also want it.
> +     */
> +    if (migrate_postcopy_ram()) {
> +        if (open_outgoing_return_path(s)) {
> +            error_report("Unable to open return-path for postcopy");
> +            migrate_set_state(s, MIG_STATE_SETUP, MIG_STATE_ERROR);
> +            migrate_fd_cleanup(s);
> +            return;
> +        }
> +    }
> +
>      qemu_thread_create(&s->thread, "migration", migration_thread, s,
>                         QEMU_THREAD_JOINABLE);
> +    s->started_migration_thread = true;
>  }
>  
>  PostcopyState  postcopy_state_get(MigrationIncomingState *mis)
> diff --git a/trace-events b/trace-events
> index 59dea4c..ed8bbe2 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -1404,9 +1404,13 @@ migrate_fd_error(void) ""
>  migrate_fd_cancel(void) ""
>  migrate_pending(uint64_t size, uint64_t max, uint64_t post, uint64_t 
> nonpost) "pending size %" PRIu64 " max %" PRIu64 " (post=%" PRIu64 " 
> nonpost=%" PRIu64 ")"
>  migrate_send_rp_message(int cmd, uint16_t len) "cmd=%d, len=%d"
> +migration_thread_after_loop(void) ""
> +migration_thread_file_err(void) ""
>  migration_thread_setup_complete(void) ""
>  open_outgoing_return_path(void) ""
>  open_outgoing_return_path_continue(void) ""
> +postcopy_start(void) ""
> +postcopy_start_set_run(void) ""
>  source_return_path_thread_bad_end(void) ""
>  source_return_path_bad_header_com(void) ""
>  source_return_path_thread_end(void) ""

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

pgpGSXrGkdROb.pgp
Description: PGP signature