Re: [Qemu-devel] [PATCH] roms: Flush icache when writing roms to guest memory

[Peter Maydell]

On 11 December 2013 14:18, address@hidden
<address@hidden> wrote:
>> From: Peter Maydell [mailto:address@hidden
>> If the architecture spec says that a freshly reset physical CPU has
>> coherent icache and dcache, then resetting the vCPU should also
>> ensure the icache and dcache are coherent, so one way to solve
>> this would be just to make sure that vcpu reset did the right thing.
>
> This is not related to reset operation. Freescale e500 core family
> does not assure the coherency between data and instruction cache.
> This is an extract from reference manual:
>
> 'When a processor modifies any memory location that can contain an
> instruction, software must ensure that the instruction cache is made
> consistent with data memory and that the modifications are made visible
> to the instruction fetching mechanism. This must be done even if the
> cache is disabled or if the page is marked caching-inhibited.'
>
> So it's the loader duty to synchronize the instruction cache.

But these are (emulated) ROMs, not an emulated bootloader.
They ought to work like actual ROMs: QEMU as the emulator
of the system/devices provides the contents of physical address
space; KVM as the emulator of the CPU provides a CPU which
doesn't start up executing from rubbish in its icache. (This matches
how a real physical CPU executes its first instruction by really
going out to the ROM, not by looking at its cache.)

thanks
-- PMM