[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH V25 1/7] Support for TPM command line options
|
From: |
Stefan Berger |
|
Subject: |
[Qemu-devel] [PATCH V25 1/7] Support for TPM command line options |
|
Date: |
Thu, 21 Feb 2013 11:33:27 -0500 |
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriver structure if the VM can be started or 'NULL'
if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0:
type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <address@hidden>
Reviewed-by: Corey Bryant <address@hidden>
---
Makefile.objs | 1 +
hmp-commands.hx | 2 +
hmp.c | 44 +++++++
hmp.h | 1 +
include/tpm/tpm.h | 21 ++++
monitor.c | 8 ++
qapi-schema.json | 104 +++++++++++++++++
qemu-options.hx | 33 ++++++
qmp-commands.hx | 18 +++
tpm/Makefile.objs | 1 +
tpm/tpm.c | 338 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
tpm/tpm_int.h | 83 ++++++++++++++
tpm/tpm_tis.h | 80 +++++++++++++
vl.c | 37 ++++++
14 files changed, 771 insertions(+)
create mode 100644 include/tpm/tpm.h
create mode 100644 tpm/Makefile.objs
create mode 100644 tpm/tpm.c
create mode 100644 tpm/tpm_int.h
create mode 100644 tpm/tpm_tis.h
diff --git a/Makefile.objs b/Makefile.objs
index a68cdac..047f9c1 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -73,6 +73,7 @@ common-obj-y += bt-host.o bt-vhci.o
common-obj-y += dma-helpers.o
common-obj-y += vl.o
+common-obj-y += tpm/
common-obj-$(CONFIG_SLIRP) += slirp/
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 64008a9..a952fd1 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1642,6 +1642,8 @@ show device tree
show qdev device model list
@item info roms
show roms
address@hidden info tpm
+show the TPM device
@end table
ETEXI
diff --git a/hmp.c b/hmp.c
index 2f47a8a..b0a861c 100644
--- a/hmp.c
+++ b/hmp.c
@@ -607,6 +607,50 @@ void hmp_info_block_jobs(Monitor *mon, const QDict *qdict)
}
}
+void hmp_info_tpm(Monitor *mon, const QDict *qdict)
+{
+ TPMInfoList *info_list, *info;
+ Error *err = NULL;
+ unsigned int c = 0;
+ TPMPassthroughOptions *tpo;
+
+ info_list = qmp_query_tpm(&err);
+ if (err) {
+ monitor_printf(mon, "TPM device not supported\n");
+ error_free(err);
+ return;
+ }
+
+ if (info_list) {
+ monitor_printf(mon, "TPM device:\n");
+ }
+
+ for (info = info_list; info; info = info->next) {
+ TPMInfo *ti = info->value;
+ monitor_printf(mon, " tpm%d: model=%s\n",
+ c, TpmModel_lookup[ti->model]);
+
+ monitor_printf(mon, " \\ %s: type=%s",
+ ti->id, TpmType_lookup[ti->type]);
+
+ switch (ti->tpm_options->kind) {
+ case TPM_TYPE_OPTIONS_KIND_TPM_PASSTHROUGH_OPTIONS:
+ tpo = ti->tpm_options->tpm_passthrough_options;
+ monitor_printf(mon, "%s%s%s%s",
+ tpo->has_path ? ",path=" : "",
+ tpo->has_path ? tpo->path : "",
+ tpo->has_cancel_path ? ",cancel-path=" : "",
+ tpo->has_cancel_path ? tpo->cancel_path : "");
+ break;
+ case TPM_TYPE_OPTIONS_KIND_MAX:
+ break;
+ }
+ monitor_printf(mon, "\n");
+ c++;
+ }
+ qapi_free_TPMInfoList(info_list);
+}
+
void hmp_quit(Monitor *mon, const QDict *qdict)
{
monitor_suspend(mon);
diff --git a/hmp.h b/hmp.h
index 30b3c20..95fe76e 100644
--- a/hmp.h
+++ b/hmp.h
@@ -36,6 +36,7 @@ void hmp_info_spice(Monitor *mon, const QDict *qdict);
void hmp_info_balloon(Monitor *mon, const QDict *qdict);
void hmp_info_pci(Monitor *mon, const QDict *qdict);
void hmp_info_block_jobs(Monitor *mon, const QDict *qdict);
+void hmp_info_tpm(Monitor *mon, const QDict *qdict);
void hmp_quit(Monitor *mon, const QDict *qdict);
void hmp_stop(Monitor *mon, const QDict *qdict);
void hmp_system_reset(Monitor *mon, const QDict *qdict);
diff --git a/include/tpm/tpm.h b/include/tpm/tpm.h
new file mode 100644
index 0000000..cc8f20e
--- /dev/null
+++ b/include/tpm/tpm.h
@@ -0,0 +1,21 @@
+/*
+ * Public TPM functions
+ *
+ * Copyright (C) 2011-2013 IBM Corporation
+ *
+ * Authors:
+ * Stefan Berger <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#ifndef QEMU_TPM_H
+#define QEMU_TPM_H
+
+#include "qemu/option.h"
+
+int tpm_config_parse(QemuOptsList *opts_list, const char *optarg);
+int tpm_init(void);
+void tpm_cleanup(void);
+
+#endif /* QEMU_TPM_H */
diff --git a/monitor.c b/monitor.c
index 6a0f257..a9ba355 100644
--- a/monitor.c
+++ b/monitor.c
@@ -47,6 +47,7 @@
#include "migration/migration.h"
#include "sysemu/kvm.h"
#include "qemu/acl.h"
+#include "tpm/tpm.h"
#include "qapi/qmp/qint.h"
#include "qapi/qmp/qfloat.h"
#include "qapi/qmp/qlist.h"
@@ -2722,6 +2723,13 @@ static mon_cmd_t info_cmds[] = {
.mhandler.cmd = do_trace_print_events,
},
{
+ .name = "tpm",
+ .args_type = "",
+ .params = "",
+ .help = "show the TPM device",
+ .mhandler.cmd = hmp_info_tpm,
+ },
+ {
.name = NULL,
},
};
diff --git a/qapi-schema.json b/qapi-schema.json
index 7275b5d..65481c6 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -3184,3 +3184,107 @@
# Since: 1.4
##
{ 'command': 'chardev-remove', 'data': {'id': 'str'} }
+
+##
+# @TpmModel:
+#
+# An enumeration of TPM models
+#
+# @tpm-tis: TPM TIS model
+#
+# Since: 1.5
+##
+{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
+
+##
+# @query-tpm-models:
+#
+# Return a list of supported TPM models
+#
+# Returns: a list of TpmModel
+#
+# Since: 1.5
+##
+{ 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
+
+##
+# @TpmType:
+#
+# An enumeration of TPM types
+#
+# @passthrough: TPM passthrough type
+#
+# Since: 1.5
+##
+{ 'enum': 'TpmType', 'data': [ 'passthrough' ] }
+
+##
+# @query-tpm-types:
+#
+# Return a list of supported TPM types
+#
+# Returns: a list of TpmType
+#
+# Since: 1.5
+##
+{ 'command': 'query-tpm-types', 'returns': ['TpmType'] }
+
+##
+# @TPMPassthroughOptions:
+#
+# Information about the TPM passthrough type
+#
+# @path: #optional string describing the path used for accessing the TPM device
+#
+# @cancel-path: #optional string showing the TPM's sysfs cancel file
+# for cancellation of TPM commands while they are executing
+#
+# Since: 1.5
+##
+{ 'type': 'TPMPassthroughOptions', 'data': { '*path' : 'str',
+ '*cancel-path' : 'str'} }
+
+##
+# @TpmTypeOptions:
+#
+# A union referencing different TPM backend types' configuration options
+#
+# @tpm-passthough-options: TPMPassthroughOptions describing the TPM
+# passthrough configuration options
+#
+# Since: 1.5
+##
+{ 'union': 'TpmTypeOptions',
+ 'data': { 'tpm-passthrough-options' : 'TPMPassthroughOptions' } }
+
+##
+# @TpmInfo:
+#
+# Information about the TPM
+#
+# @id: The Id of the TPM
+#
+# @model: The TPM frontend model
+#
+# @type: The TPM (backend) type being used
+#
+# @tpm-options: The TPM (backend) type configuration options
+#
+# Since: 1.5
+##
+{ 'type': 'TPMInfo',
+ 'data': {'id': 'str',
+ 'model': 'TpmModel',
+ 'type': 'TpmType',
+ 'tpm-options': 'TpmTypeOptions' } }
+
+##
+# @query-tpm:
+#
+# Return information about the TPM device
+#
+# Returns: @TPMInfo on success
+#
+# Since: 1.5
+##
+{ 'command': 'query-tpm', 'returns': ['TPMInfo'] }
diff --git a/qemu-options.hx b/qemu-options.hx
index 4bc9c85..655b4a3 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2214,6 +2214,39 @@ STEXI
ETEXI
DEFHEADING()
+#ifdef CONFIG_TPM
+DEFHEADING(TPM device options:)
+
+DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
+ "-tpmdev [<type>],id=str[,option][,option][,...]\n",
+ QEMU_ARCH_ALL)
+STEXI
+
+The general form of a TPM device option is:
address@hidden @option
+
address@hidden -tpmdev @var{backend} ,address@hidden [,@var{options}]
address@hidden -tpmdev
+Backend type must be:
+
+The specific backend type will determine the applicable options.
+The @code{-tpmdev} options requires a @code{-device} option.
+
+Options to each backend are described below.
+
+Use 'help' to print all available TPM backend types.
address@hidden
+qemu -tpmdev help
address@hidden example
+
address@hidden table
+
+ETEXI
+
+DEFHEADING()
+
+#endif
+
DEFHEADING(Linux/Multiboot boot specific:)
STEXI
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 799adea..3454cf8 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -2716,6 +2716,24 @@ EQMP
},
{
+ .name = "query-tpm",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_tpm,
+ },
+
+ {
+ .name = "query-tpm-models",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_tpm_models,
+ },
+
+ {
+ .name = "query-tpm-types",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_tpm_types,
+ },
+
+ {
.name = "chardev-add",
.args_type = "id:s,backend:q",
.mhandler.cmd_new = qmp_marshal_input_chardev_add,
diff --git a/tpm/Makefile.objs b/tpm/Makefile.objs
new file mode 100644
index 0000000..dffb567
--- /dev/null
+++ b/tpm/Makefile.objs
@@ -0,0 +1 @@
+common-obj-y = tpm.o
diff --git a/tpm/tpm.c b/tpm/tpm.c
new file mode 100644
index 0000000..02c592e
--- /dev/null
+++ b/tpm/tpm.c
@@ -0,0 +1,338 @@
+/*
+ * TPM configuration
+ *
+ * Copyright (C) 2011-2013 IBM Corporation
+ *
+ * Authors:
+ * Stefan Berger <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * Based on net.c
+ */
+#include "config-host.h"
+
+#include "monitor/monitor.h"
+#include "qapi/qmp/qerror.h"
+#include "tpm_int.h"
+#include "tpm/tpm.h"
+#include "qemu/config-file.h"
+#include "qmp-commands.h"
+
+static QLIST_HEAD(, TPMBackend) tpm_backends =
+ QLIST_HEAD_INITIALIZER(tpm_backends);
+
+
+#define TPM_MAX_MODELS 1
+#define TPM_MAX_DRIVERS 1
+
+static TPMDriverOps const *be_drivers[TPM_MAX_DRIVERS] = {
+ NULL,
+};
+
+static enum TpmModel tpm_models[TPM_MAX_MODELS] = {
+ -1,
+};
+
+int tpm_register_model(enum TpmModel model)
+{
+ int i;
+
+ for (i = 0; i < TPM_MAX_MODELS; i++) {
+ if (tpm_models[i] == -1) {
+ tpm_models[i] = model;
+ return 0;
+ }
+ }
+ error_report("Could not register TPM model");
+ return 1;
+}
+
+static bool tpm_model_is_registered(enum TpmModel model)
+{
+ int i;
+
+ for (i = 0; i < TPM_MAX_MODELS; i++) {
+ if (tpm_models[i] == model) {
+ return true;
+ }
+ }
+ return false;
+}
+
+const TPMDriverOps *tpm_get_backend_driver(const char *type)
+{
+ int i;
+
+ for (i = 0; i < TPM_MAX_DRIVERS && be_drivers[i] != NULL; i++) {
+ if (!strcmp(TpmType_lookup[be_drivers[i]->type], type)) {
+ return be_drivers[i];
+ }
+ }
+
+ return NULL;
+}
+
+#ifdef CONFIG_TPM
+
+int tpm_register_driver(const TPMDriverOps *tdo)
+{
+ int i;
+
+ for (i = 0; i < TPM_MAX_DRIVERS; i++) {
+ if (!be_drivers[i]) {
+ be_drivers[i] = tdo;
+ return 0;
+ }
+ }
+ error_report("Could not register TPM driver");
+ return 1;
+}
+
+/*
+ * Walk the list of available TPM backend drivers and display them on the
+ * screen.
+ */
+void tpm_display_backend_drivers(void)
+{
+ int i;
+
+ fprintf(stderr, "Supported TPM types (choose only one):\n");
+
+ for (i = 0; i < TPM_MAX_DRIVERS && be_drivers[i] != NULL; i++) {
+ fprintf(stderr, "%12s %s\n",
+ TpmType_lookup[be_drivers[i]->type], be_drivers[i]->desc());
+ }
+ fprintf(stderr, "\n");
+}
+
+/*
+ * Find the TPM with the given Id
+ */
+TPMBackend *qemu_find_tpm(const char *id)
+{
+ TPMBackend *drv;
+
+ QLIST_FOREACH(drv, &tpm_backends, list) {
+ if (!strcmp(drv->id, id)) {
+ return drv;
+ }
+ }
+
+ return NULL;
+}
+
+static int configure_tpm(QemuOpts *opts)
+{
+ const char *value;
+ const char *id;
+ const TPMDriverOps *be;
+ TPMBackend *drv;
+
+ if (!QLIST_EMPTY(&tpm_backends)) {
+ error_report("Only one TPM is allowed.\n");
+ return 1;
+ }
+
+ id = qemu_opts_id(opts);
+ if (id == NULL) {
+ qerror_report(QERR_MISSING_PARAMETER, "id");
+ return 1;
+ }
+
+ value = qemu_opt_get(opts, "type");
+ if (!value) {
+ qerror_report(QERR_MISSING_PARAMETER, "type");
+ tpm_display_backend_drivers();
+ return 1;
+ }
+
+ be = tpm_get_backend_driver(value);
+ if (be == NULL) {
+ qerror_report(QERR_INVALID_PARAMETER_VALUE, "type",
+ "a TPM backend type");
+ tpm_display_backend_drivers();
+ return 1;
+ }
+
+ drv = be->create(opts, id);
+ if (!drv) {
+ return 1;
+ }
+
+ QLIST_INSERT_HEAD(&tpm_backends, drv, list);
+
+ return 0;
+}
+
+static int tpm_init_tpmdev(QemuOpts *opts, void *dummy)
+{
+ return configure_tpm(opts);
+}
+
+/*
+ * Walk the list of TPM backend drivers that are in use and call their
+ * destroy function to have them cleaned up.
+ */
+void tpm_cleanup(void)
+{
+ TPMBackend *drv, *next;
+
+ QLIST_FOREACH_SAFE(drv, &tpm_backends, list, next) {
+ QLIST_REMOVE(drv, list);
+ drv->ops->destroy(drv);
+ }
+}
+
+/*
+ * Initialize the TPM. Process the tpmdev command line options describing the
+ * TPM backend.
+ */
+int tpm_init(void)
+{
+ if (qemu_opts_foreach(qemu_find_opts("tpmdev"),
+ tpm_init_tpmdev, NULL, 1) != 0) {
+ return -1;
+ }
+
+ atexit(tpm_cleanup);
+
+ return 0;
+}
+
+/*
+ * Parse the TPM configuration options.
+ * To display all available TPM backends the user may use '-tpmdev help'
+ */
+int tpm_config_parse(QemuOptsList *opts_list, const char *optarg)
+{
+ QemuOpts *opts;
+
+ if (!strcmp(optarg, "help")) {
+ tpm_display_backend_drivers();
+ return -1;
+ }
+ opts = qemu_opts_parse(opts_list, optarg, 1);
+ if (!opts) {
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_TPM */
+
+static const TPMDriverOps *tpm_driver_find_by_type(enum TpmType type)
+{
+ int i;
+
+ for (i = 0; i < TPM_MAX_DRIVERS && be_drivers[i] != NULL; i++) {
+ if (be_drivers[i]->type == type) {
+ return be_drivers[i];
+ }
+ }
+ return NULL;
+}
+
+static TPMInfo *qmp_query_tpm_inst(TPMBackend *drv)
+{
+ TPMInfo *res = g_new0(TPMInfo, 1);
+ TPMPassthroughOptions *tpo;
+
+ res->id = g_strdup(drv->id);
+ res->model = drv->fe_model;
+ res->type = drv->ops->type;
+ res->tpm_options = g_new0(TpmTypeOptions, 1);
+
+ switch (res->type) {
+ case TPM_TYPE_PASSTHROUGH:
+ res->tpm_options->kind = TPM_TYPE_OPTIONS_KIND_TPM_PASSTHROUGH_OPTIONS;
+ tpo = g_new0(TPMPassthroughOptions, 1);
+ res->tpm_options->tpm_passthrough_options = tpo;
+ if (drv->path) {
+ tpo->path = g_strdup(drv->path);
+ tpo->has_path = true;
+ }
+ if (drv->cancel_path) {
+ tpo->cancel_path = g_strdup(drv->cancel_path);
+ tpo->has_cancel_path = true;
+ }
+ break;
+ case TPM_TYPE_MAX:
+ break;
+ }
+
+ return res;
+}
+
+/*
+ * Walk the list of active TPM backends and collect information about them
+ * following the schema description in qapi-schema.json.
+ */
+TPMInfoList *qmp_query_tpm(Error **errp)
+{
+ TPMBackend *drv;
+ TPMInfoList *info, *head = NULL, *cur_item = NULL;
+
+ QLIST_FOREACH(drv, &tpm_backends, list) {
+ info = g_new0(TPMInfoList, 1);
+ info->value = qmp_query_tpm_inst(drv);
+
+ if (!cur_item) {
+ head = cur_item = info;
+ } else {
+ cur_item->next = info;
+ cur_item = info;
+ }
+ }
+
+ return head;
+}
+
+TpmTypeList *qmp_query_tpm_types(Error **errp)
+{
+ unsigned int i = 0;
+ TpmTypeList *head = NULL, *prev = NULL, *cur_item;
+
+ for (i = 0; i < TPM_TYPE_MAX; i++) {
+ if (!tpm_driver_find_by_type(i)) {
+ continue;
+ }
+ cur_item = g_new0(TpmTypeList, 1);
+ cur_item->value = i;
+
+ if (prev) {
+ prev->next = cur_item;
+ }
+ if (!head) {
+ head = cur_item;
+ }
+ prev = cur_item;
+ }
+
+ return head;
+}
+
+TpmModelList *qmp_query_tpm_models(Error **errp)
+{
+ unsigned int i = 0;
+ TpmModelList *head = NULL, *prev = NULL, *cur_item;
+
+ for (i = 0; i < TPM_MODEL_MAX; i++) {
+ if (!tpm_model_is_registered(i)) {
+ continue;
+ }
+ cur_item = g_new0(TpmModelList, 1);
+ cur_item->value = i;
+
+ if (prev) {
+ prev->next = cur_item;
+ }
+ if (!head) {
+ head = cur_item;
+ }
+ prev = cur_item;
+ }
+
+ return head;
+}
diff --git a/tpm/tpm_int.h b/tpm/tpm_int.h
new file mode 100644
index 0000000..d5358ad
--- /dev/null
+++ b/tpm/tpm_int.h
@@ -0,0 +1,83 @@
+/*
+ * TPM configuration
+ *
+ * Copyright (C) 2011-2013 IBM Corporation
+ *
+ * Authors:
+ * Stefan Berger <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#ifndef TPM_TPM_INT_H
+#define TPM_TPM_INT_H
+
+#include "exec/memory.h"
+#include "tpm/tpm_tis.h"
+
+struct TPMDriverOps;
+typedef struct TPMDriverOps TPMDriverOps;
+
+typedef struct TPMBackend {
+ char *id;
+ enum TpmModel fe_model;
+ char *path;
+ char *cancel_path;
+ const TPMDriverOps *ops;
+
+ QLIST_ENTRY(TPMBackend) list;
+} TPMBackend;
+
+/* overall state of the TPM interface */
+typedef struct TPMState {
+ ISADevice busdev;
+ MemoryRegion mmio;
+
+ union {
+ TPMTISEmuState tis;
+ } s;
+
+ uint8_t locty_number;
+ TPMLocality *locty_data;
+
+ char *backend;
+ TPMBackend *be_driver;
+} TPMState;
+
+#define TPM(obj) OBJECT_CHECK(TPMState, (obj), TYPE_TPM_TIS)
+
+typedef void (TPMRecvDataCB)(TPMState *, uint8_t locty);
+
+struct TPMDriverOps {
+ enum TpmType type;
+ /* get a descriptive text of the backend to display to the user */
+ const char *(*desc)(void);
+
+ TPMBackend *(*create)(QemuOpts *opts, const char *id);
+ void (*destroy)(TPMBackend *t);
+
+ /* initialize the backend */
+ int (*init)(TPMBackend *t, TPMState *s, TPMRecvDataCB *datacb);
+ /* start up the TPM on the backend */
+ int (*startup_tpm)(TPMBackend *t);
+ /* returns true if nothing will ever answer TPM requests */
+ bool (*had_startup_error)(TPMBackend *t);
+
+ size_t (*realloc_buffer)(TPMSizedBuffer *sb);
+
+ void (*deliver_request)(TPMBackend *t);
+
+ void (*reset)(TPMBackend *t);
+
+ void (*cancel_cmd)(TPMBackend *t);
+
+ bool (*get_tpm_established_flag)(TPMBackend *t);
+};
+
+TPMBackend *qemu_find_tpm(const char *id);
+int tpm_register_model(enum TpmModel model);
+int tpm_register_driver(const TPMDriverOps *tdo);
+void tpm_display_backend_drivers(void);
+const TPMDriverOps *tpm_get_backend_driver(const char *type);
+
+#endif /* TPM_TPM_INT_H */
diff --git a/tpm/tpm_tis.h b/tpm/tpm_tis.h
new file mode 100644
index 0000000..0c8df80
--- /dev/null
+++ b/tpm/tpm_tis.h
@@ -0,0 +1,80 @@
+/*
+ * tpm_tis.h - QEMU's TPM TIS interface emulator
+ *
+ * Copyright (C) 2006, 2010-2013 IBM Corporation
+ *
+ * Authors:
+ * Stefan Berger <address@hidden>
+ * David Safford <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * Implementation of the TIS interface according to specs found at
+ * http://www.trustedcomputinggroup.org
+ *
+ */
+#ifndef TPM_TPM_TIS_H
+#define TPM_TPM_TIS_H
+
+#include "hw/isa.h"
+#include "qemu-common.h"
+
+#define TPM_TIS_ADDR_BASE 0xFED40000
+
+#define TPM_TIS_NUM_LOCALITIES 5 /* per spec */
+#define TPM_TIS_LOCALITY_SHIFT 12
+#define TPM_TIS_NO_LOCALITY 0xff
+
+#define TPM_TIS_IS_VALID_LOCTY(x) ((x) < TPM_TIS_NUM_LOCALITIES)
+
+#define TPM_TIS_IRQ 5
+
+#define TPM_TIS_BUFFER_MAX 4096
+
+#define TYPE_TPM_TIS "tpm-tis"
+
+
+typedef struct TPMSizedBuffer {
+ uint32_t size;
+ uint8_t *buffer;
+} TPMSizedBuffer;
+
+typedef enum {
+ TPM_TIS_STATE_IDLE = 0,
+ TPM_TIS_STATE_READY,
+ TPM_TIS_STATE_COMPLETION,
+ TPM_TIS_STATE_EXECUTION,
+ TPM_TIS_STATE_RECEPTION,
+} TPMTISState;
+
+/* locality data -- all fields are persisted */
+typedef struct TPMLocality {
+ TPMTISState state;
+ uint8_t access;
+ uint8_t sts;
+ uint32_t inte;
+ uint32_t ints;
+
+ uint16_t w_offset;
+ uint16_t r_offset;
+ TPMSizedBuffer w_buffer;
+ TPMSizedBuffer r_buffer;
+} TPMLocality;
+
+typedef struct TPMTISEmuState {
+ QEMUBH *bh;
+ uint32_t offset;
+ uint8_t buf[TPM_TIS_BUFFER_MAX];
+
+ uint8_t active_locty;
+ uint8_t aborting_locty;
+ uint8_t next_locty;
+
+ TPMLocality loc[TPM_TIS_NUM_LOCALITIES];
+
+ qemu_irq irq;
+ uint32_t irq_num;
+} TPMTISEmuState;
+
+#endif /* TPM_TPM_TIS_H */
diff --git a/vl.c b/vl.c
index c5b0eea..19065d0 100644
--- a/vl.c
+++ b/vl.c
@@ -139,6 +139,7 @@ int main(int argc, char **argv)
#include "sysemu/blockdev.h"
#include "hw/block-common.h"
#include "migration/block.h"
+#include "tpm/tpm.h"
#include "sysemu/dma.h"
#include "audio/audio.h"
#include "migration/migration.h"
@@ -491,6 +492,25 @@ static QemuOptsList qemu_object_opts = {
},
};
+static QemuOptsList qemu_tpmdev_opts = {
+ .name = "tpmdev",
+ .implied_opt_name = "type",
+ .head = QTAILQ_HEAD_INITIALIZER(qemu_tpmdev_opts.head),
+ .desc = {
+ {
+ .name = "type",
+ .type = QEMU_OPT_STRING,
+ .help = "Type of TPM backend",
+ },
+ {
+ .name = "path",
+ .type = QEMU_OPT_STRING,
+ .help = "Path to TPM device on the host",
+ },
+ { /* end of list */ }
+ },
+};
+
const char *qemu_get_vm_name(void)
{
return qemu_name;
@@ -2860,6 +2880,7 @@ int main(int argc, char **argv, char **envp)
qemu_add_opts(&qemu_sandbox_opts);
qemu_add_opts(&qemu_add_fd_opts);
qemu_add_opts(&qemu_object_opts);
+ qemu_add_opts(&qemu_tpmdev_opts);
runstate_init();
@@ -3223,6 +3244,13 @@ int main(int argc, char **argv, char **envp)
}
break;
}
+#ifdef CONFIG_TPM
+ case QEMU_OPTION_tpmdev:
+ if (tpm_config_parse(qemu_find_opts("tpmdev"), optarg) < 0) {
+ exit(1);
+ }
+ break;
+#endif
case QEMU_OPTION_mempath:
mem_path = optarg;
break;
@@ -4080,6 +4108,12 @@ int main(int argc, char **argv, char **envp)
exit(1);
}
+#ifdef CONFIG_TPM
+ if (tpm_init() < 0) {
+ exit(1);
+ }
+#endif
+
/* init the bluetooth world */
if (foreach_device_config(DEV_BT, bt_parse))
exit(1);
@@ -4334,6 +4368,9 @@ int main(int argc, char **argv, char **envp)
bdrv_close_all();
pause_all_vcpus();
res_free();
+#ifdef CONFIG_TPM
+ tpm_cleanup();
+#endif
return 0;
}
--
1.7.11.7
[Qemu-devel] [PATCH V25 5/7] Add a TPM Passthrough backend driver implementation, Stefan Berger, 2013/02/21
[Qemu-devel] [PATCH V25 3/7] Add a debug register, Stefan Berger, 2013/02/21
[Qemu-devel] [PATCH V25 6/7] Add support for cancelling of a TPM command, Stefan Berger, 2013/02/21