Re: [Qemu-devel] vio-net driver

[Charles . Tsai-蔡清海-研究發展部]

Brain,

        Thank you for information. With your confirmation, I think our engineer 
must have done something wrong during   the software upgrade process. I will 
keep an eye on this when we re-do the test.


-----Original Message-----
From: Brian Jackson [mailto:address@hidden 
Sent: Friday, June 15, 2012 6:30 AM
To: address@hidden
Cc: Charles.Tsai-蔡清海-研究發展部
Subject: Re: [Qemu-devel] vio-net driver

On Sunday, June 10, 2012 08:50:30 PM Charles.Tsai-蔡清海-研究發展部 wrote:
> Hi Brian,
> 
> Do you have any finding for VirtIO Net driver problem?


Nothing jumped out at me after looking over your response. It would still be 
nice to know the actual kvm command line options that were used (since I don't 
really speak libvirt xml all that well). 


> The latest Ubuntu release(v 12.04) still comes with Qemu 0.14.1.
> Did you find any debug report for VirtIO Net driver on qemu 0.14.1?


Hard to say what versions exactly were impacted. I know there were problems 
like you reported in earlier versions, but I don't remember exactly what 
versions. 12.04 should have qemu-kvm-1.0, which I'm pretty sure wouldn't have 
problems like you described.


> If we need to upgrade qemu, is there any installation package 
> available over the web? Last time, my co-worker upgraded the Qemu by 
> compiling the source code. I am wondering that my co-worker might have 
> done something wrong during the upgrade process that caused software 
> conflict. Please let me know the easiest way to upgrade Qemu for Ubuntu 
> without any hassle.


Usually, you want to use what comes with your distro.



> 
> Thanks.
> 
> -----Original Message-----
> From: Charles.Tsai-蔡清海-研究發展部
> Sent: Wednesday, June 06, 2012 11:48 AM
> To: 'Brian Jackson'; address@hidden
> Subject: RE: [Qemu-devel] vio-net driver
> 
> Hi Brian,
> 
>       Here are the information from our system.
> 
>       We launched the VM using the following XML file.
>       The kernel version is 3.0.0.12
>       The Qemu version is 1.0.0(we upgraded it. Default one is 0.14.1)
> 
> ===================================================================
> <domain type='kvm'>
>   <name>MONITOR</name>
>   <uuid>c34f950d-6784-468b-ab1d-d7a4bff3522c</uuid>
>   <memory>2097152</memory>
>   <currentMemory>2097152</currentMemory>
>   <vcpu>1</vcpu>
>   <os>
>     <type arch='x86_64' machine='pc'>hvm</type>
>     <boot dev='network'/>
>     <bootmenu enable='no'/>
>   </os>
>   <features>
>     <acpi/>
>     <apic/>
>     <pae/>
>   </features>
>   <clock offset='utc'/>
>   <on_poweroff>destroy</on_poweroff>
>   <on_reboot>restart</on_reboot>
>   <on_crash>restart</on_crash>
>   <devices>
>     <emulator>/usr/bin/kvm</emulator>
>     <disk type='file' device='disk'>
>       <driver name='qemu' type='raw' cache='none'/>
>       <source file='/opt/cloudena/cloudena_boot/vms/monitor/monitor.img'/>
>       <target dev='vda' bus='virtio'/>
>     </disk>
>     <interface type='bridge'>
>       <mac address='00:00:00:00:00:02'/>
>       <source bridge='deploy'/>
>       <model type='virtio'/>
>     </interface>
>     <serial type='pty'>
>       <source path='/dev/pts/12'/>
>       <target port='0'/>
>       <alias name='serial0'/>
>     </serial>
>     <console type='pty' tty='/dev/pts/12'>
>       <source path='/dev/pts/12'/>
>       <target type='serial' port='0'/>
>       <alias name='serial0'/>
>     </console>
>     <input type='mouse' bus='ps2'/>
>     <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'/>
>     <video>
>       <model type='cirrus' vram='9216' heads='1'/>
>       <alias name='video0'/>
>     </video>
>     <memballoon model='virtio'>
>       <alias name='balloon0'/>
>     </memballoon>
>   </devices>
> </domain>
> 
> -----Original Message-----
> From: Brian Jackson [mailto:address@hidden
> Sent: Wednesday, June 06, 2012 2:30 AM
> To: address@hidden
> Cc: Charles.Tsai-蔡清海-研究發展部
> Subject: Re: [Qemu-devel] vio-net driver
> 
> On Tuesday, June 05, 2012 12:17:17 AM Charles.Tsai-蔡清海-研究發展部 wrote:
> > We recently ran an Ubuntu 11.10 VM which was installed with VirtIO 
> > NIC driver. The VirtIO net driver came from the Ubuntu's default package.
> > The VM we installed was configured as a bridge mode. When we ran the 
> > Iperf test against the VM, the network interface of the VM was 
> > fairly unstable. Sometimes, the network interface of the VM could 
> > not receive the packets and we needed to bright the network 
> > interface down and up in order to make it work. After we replaced 
> > the VirtIo Net driver with ne2k driver and it worked quite stably now.
> 
> The normal answer is "update to the latest kernel (host and guest) and 
> qemu/kvm.
> 
> > We know that the performance of virtIO is much better than ne2k in 
> > virtual environment. We would like to use virtio driver instead. If 
> > this is the virtio driver issue, can you tell us where to get the 
> > latest virtIO driver for Ubuntu VM? Otherwise, tell us how to make 
> > the virtio net driver work in Ubuntu VM if you have ever had similar issue 
> > before.
> > 
> > The version of Qemu installed in Ubuntu is 1.0
> 
> I have to imagine they are backporting 1.0 branch fixes to that, but 
> even then nothing pops out in my memory about problems like that with 1.0.
> Older versions are a different story. You might try telling us host 
> kernel version, guest kernel version (we don't all have a matrix for 
> what random distro version has what kernel/qemu/kvm versions). Also, 
> the command line used to run the guest is almost always a requirement for 
> help.