[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [kvm-unit-tests PATCH v2 07/16] arm/arm64: ITS: Set the LPI config a
From: |
Andrew Jones |
Subject: |
Re: [kvm-unit-tests PATCH v2 07/16] arm/arm64: ITS: Set the LPI config and pending tables |
Date: |
Mon, 13 Jan 2020 18:31:14 +0100 |
On Fri, Jan 10, 2020 at 03:54:03PM +0100, Eric Auger wrote:
> Allocate the LPI configuration and per re-distributor pending table.
> Set redistributor's PROPBASER and PENDBASER. The LPIs are enabled
> by default in the config table.
>
> Also introduce a helper routine that allows to set the pending table
> bit for a given LPI.
>
> Signed-off-by: Eric Auger <address@hidden>
>
> ---
>
> v1 -> v2:
> - remove memory attributes
> ---
> lib/arm/asm/gic-v3-its.h | 3 ++
> lib/arm/asm/gic-v3.h | 12 ++++++++
> lib/arm/gic-v3-its.c | 60 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 75 insertions(+)
>
> diff --git a/lib/arm/asm/gic-v3-its.h b/lib/arm/asm/gic-v3-its.h
> index 5a4dfe9..2f8b8f1 100644
> --- a/lib/arm/asm/gic-v3-its.h
> +++ b/lib/arm/asm/gic-v3-its.h
> @@ -90,6 +90,9 @@ extern void its_init(void);
> extern int its_parse_baser(int i, struct its_baser *baser);
> extern void its_setup_baser(int i, struct its_baser *baser);
> extern struct its_baser *its_lookup_baser(int type);
> +extern void set_lpi_config(int n, u8 val);
> +extern u8 get_lpi_config(int n);
> +extern void set_pending_table_bit(int rdist, int n, bool set);
Please prefix with 'its' or at least swap the 'lpi' and verb. E.g.
lpi_set_config, its_set_pending_table_bit.
>
> #endif /* !__ASSEMBLY__ */
> #endif /* _ASMARM_GIC_V3_ITS_H_ */
> diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
> index ffb2e26..90a7304 100644
> --- a/lib/arm/asm/gic-v3.h
> +++ b/lib/arm/asm/gic-v3.h
> @@ -48,6 +48,16 @@
> #define MPIDR_TO_SGI_AFFINITY(cluster_id, level) \
> (MPIDR_AFFINITY_LEVEL(cluster_id, level) << ICC_SGI1R_AFFINITY_## level
> ## _SHIFT)
>
> +#define GICR_PROPBASER_IDBITS_MASK (0x1f)
> +
> +#define GICR_PENDBASER_PTZ BIT_ULL(62)
> +
> +#define LPI_PROP_GROUP1 (1 << 1)
> +#define LPI_PROP_ENABLED (1 << 0)
> +#define LPI_PROP_DEFAULT_PRIO 0xa0
> +#define LPI_PROP_DEFAULT (LPI_PROP_DEFAULT_PRIO | LPI_PROP_GROUP1 | \
> + LPI_PROP_ENABLED)
> +
> #include <asm/arch_gicv3.h>
>
> #ifndef __ASSEMBLY__
> @@ -64,6 +74,8 @@ struct gicv3_data {
> void *dist_base;
> void *redist_bases[GICV3_NR_REDISTS];
> void *redist_base[NR_CPUS];
> + void *lpi_prop;
> + void *lpi_pend[NR_CPUS];
> unsigned int irq_nr;
> };
> extern struct gicv3_data gicv3_data;
> diff --git a/lib/arm/gic-v3-its.c b/lib/arm/gic-v3-its.c
> index 79946c3..6c97569 100644
> --- a/lib/arm/gic-v3-its.c
> +++ b/lib/arm/gic-v3-its.c
> @@ -117,3 +117,63 @@ void its_setup_baser(int i, struct its_baser *baser)
> writeq(val, gicv3_its_base() + GITS_BASER + i * 8);
> }
>
> +inline void set_lpi_config(int n, u8 value)
> +{
> + u8 *entry = (u8 *)(gicv3_data.lpi_prop + (n - 8192));
> + *entry = value;
> +}
> +
> +inline u8 get_lpi_config(int n)
> +{
> + u8 *entry = (u8 *)(gicv3_data.lpi_prop + (n - 8192));
> + return *entry;
> +}
Probably don't need the 'inline', but ok.
> +
> +/* alloc_lpi_tables: Allocate LPI config and pending tables */
> +void alloc_lpi_tables(void);
> +void alloc_lpi_tables(void)
Why not add this to the header (renamed to lpi_alloc_tables)? Or should
this function be static?
> +{
> + unsigned long n = SZ_64K >> PAGE_SHIFT;
> + unsigned long order = fls(n);
> + u64 prop_val;
> + int cpu;
> +
> + gicv3_data.lpi_prop = (void *)virt_to_phys(alloc_pages(order));
> +
> + /* ID bits = 13, ie. up to 14b LPI INTID */
> + prop_val = (u64)gicv3_data.lpi_prop | 13;
> +
> + /*
> + * Allocate pending tables for each redistributor
> + * and set PROPBASER and PENDBASER
> + */
> + for_each_present_cpu(cpu) {
> + u64 pend_val;
> + void *ptr;
> +
> + ptr = gicv3_data.redist_base[cpu];
> +
> + writeq(prop_val, ptr + GICR_PROPBASER);
> +
> + gicv3_data.lpi_pend[cpu] =
> + (void *)virt_to_phys(alloc_pages(order));
nit: I think these line brakes on = or worse than going over 80 chars.
And, you don't need to worry about 80 chars anyway. See the README, we
allow 120.
> +
> + pend_val = (u64)gicv3_data.lpi_pend[cpu];
> +
> + writeq(pend_val, ptr + GICR_PENDBASER);
> + }
> +}
> +
> +void set_pending_table_bit(int rdist, int n, bool set)
> +{
> + u8 *ptr = phys_to_virt((phys_addr_t)gicv3_data.lpi_pend[rdist]);
> + u8 mask = 1 << (n % 8), byte;
> +
> + ptr += (n / 8);
> + byte = *ptr;
> + if (set)
> + byte |= mask;
> + else
> + byte &= ~mask;
> + *ptr = byte;
> +}
> --
> 2.20.1
>
Thanks,
drew
- [kvm-unit-tests PATCH v2 03/16] arm/arm64: gic: Introduce setup_irq() helper, (continued)
- [kvm-unit-tests PATCH v2 03/16] arm/arm64: gic: Introduce setup_irq() helper, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 04/16] arm/arm64: gicv3: Add some re-distributor defines, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 05/16] arm/arm64: ITS: Introspection tests, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 06/16] arm/arm64: ITS: Test BASER, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 07/16] arm/arm64: ITS: Set the LPI config and pending tables, Eric Auger, 2020/01/10
- Re: [kvm-unit-tests PATCH v2 07/16] arm/arm64: ITS: Set the LPI config and pending tables,
Andrew Jones <=
- [kvm-unit-tests PATCH v2 08/16] arm/arm64: ITS: Init the command queue, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 09/16] arm/arm64: ITS: Enable/Disable LPIs at re-distributor level, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 10/16] arm/arm64: ITS: its_enable_defaults, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 11/16] arm/arm64: ITS: Device and collection Initialization, Eric Auger, 2020/01/10
- [kvm-unit-tests PATCH v2 12/16] arm/arm64: ITS: commands, Eric Auger, 2020/01/10