[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH 7/7] aspeed: Link SCU to the watchdog
From: |
Joel Stanley |
Subject: |
[Qemu-arm] [PATCH 7/7] aspeed: Link SCU to the watchdog |
Date: |
Tue, 7 Aug 2018 17:27:57 +0930 |
The ast2500 uses the watchdog to reset the SDRAM controller. This
operation is usually performed by u-boot's memory training procedure,
and it is enabled by setting a bit in the SCU and then causing the
watchdog to expire. Therefore, we need the watchdog to be able to
acess the SCU's register space.
This does not cause a system reset, but only resets the SDRAM
controller.
Signed-off-by: Joel Stanley <address@hidden>
---
hw/arm/aspeed_soc.c | 2 ++
hw/watchdog/wdt_aspeed.c | 20 ++++++++++++++++++++
include/hw/watchdog/wdt_aspeed.h | 1 +
3 files changed, 23 insertions(+)
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index a27233d4876b..2cbacb4430bb 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -164,6 +164,8 @@ static void aspeed_soc_init(Object *obj)
qdev_set_parent_bus(DEVICE(&s->wdt[i]), sysbus_get_default());
qdev_prop_set_uint32(DEVICE(&s->wdt[i]), "silicon-rev",
sc->info->silicon_rev);
+ object_property_add_const_link(OBJECT(&s->wdt[i]), "scu",
+ OBJECT(&s->scu), &error_abort);
}
object_initialize(&s->ftgmac100, sizeof(s->ftgmac100), TYPE_FTGMAC100);
diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c
index 95f6ad186d72..f5cb30c0b584 100644
--- a/hw/watchdog/wdt_aspeed.c
+++ b/hw/watchdog/wdt_aspeed.c
@@ -43,6 +43,9 @@
#define WDT_RESTART_MAGIC 0x4755
+#define SCU_RESET_CONTROL1 (0x04 / 4)
+#define SCU_RESET_SDRAM BIT(0)
+
static bool aspeed_wdt_is_enabled(const AspeedWDTState *s)
{
return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE;
@@ -221,6 +224,13 @@ static void aspeed_wdt_timer_expired(void *dev)
{
AspeedWDTState *s = ASPEED_WDT(dev);
+ /* Do not reset on SDRAM controller reset */
+ if (s->scu->regs[SCU_RESET_CONTROL1] & SCU_RESET_SDRAM) {
+ timer_del(s->timer);
+ s->regs[WDT_CTRL] = 0;
+ return;
+ }
+
qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n");
watchdog_perform_action();
timer_del(s->timer);
@@ -232,6 +242,16 @@ static void aspeed_wdt_realize(DeviceState *dev, Error
**errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedWDTState *s = ASPEED_WDT(dev);
+ Error *err = NULL;
+ Object *obj;
+
+ obj = object_property_get_link(OBJECT(dev), "scu", &err);
+ if (!obj) {
+ error_propagate(errp, err);
+ error_prepend(errp, "required link 'scu' not found: ");
+ return;
+ }
+ s->scu = ASPEED_SCU(obj);
if (!is_supported_silicon_rev(s->silicon_rev)) {
error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h
index 7de3e5c224fb..cc734bd7ae7b 100644
--- a/include/hw/watchdog/wdt_aspeed.h
+++ b/include/hw/watchdog/wdt_aspeed.h
@@ -26,6 +26,7 @@ typedef struct AspeedWDTState {
MemoryRegion iomem;
uint32_t regs[ASPEED_WDT_REGS_MAX];
+ AspeedSCUState *scu;
uint32_t pclk_freq;
uint32_t silicon_rev;
uint32_t ext_pulse_width_mask;
--
2.17.1
- Re: [Qemu-arm] [PATCH 3/7] aspeed_sdmc: Set 'cache initial sequence' always true, (continued)