|
From: | dharmik thakkar |
Subject: | [Qemu-arm] Unable to run QEMU with ubuntu ARM image on mac. |
Date: | Mon, 4 Apr 2016 11:00:30 +0530 |
Hi,
I am trying to run ubuntu for arm using qemu. I have tried using different images for ubuntu but have ended up with same error ‘Trying to execute code outside RAM or ROM at 0x08000000’.
Below are the steps I have followed to run ubuntu on qemu -
1. qemu-img create -f qcow2 linuxarm.qcow2 10G.
2. qemu-system-arm -hda linuxarm.qcow2 -cdrom ~/Downloads/2015-04-06-ubuntu-trusty.zip -boot d -m 512 -M virt
I have also tried using different images from http://cdimage.ubuntu.com/ubuntu-core/releases/14.04/release/.
I am seeing the following error -
qemu: fatal: Trying to execute code outside RAM or ROM at 0x08000000
R00=00000000 R01=00000000 R02=00000000 R03=00000000
R04=00000000 R05=00000000 R06=00000000 R07=00000000
R08=00000000 R09=00000000 R10=00000000 R11=00000000
R12=00000000 R13=00000000 R14=00000000 R15=08000000
PSR=400001d3 -Z-- A svc32
s00=00000000 s01=00000000 d00=0000000000000000
s02=00000000 s03=00000000 d01=0000000000000000
s04=00000000 s05=00000000 d02=0000000000000000
s06=00000000 s07=00000000 d03=0000000000000000
s08=00000000 s09=00000000 d04=0000000000000000
s10=00000000 s11=00000000 d05=0000000000000000
s12=00000000 s13=00000000 d06=0000000000000000
s14=00000000 s15=00000000 d07=0000000000000000
s16=00000000 s17=00000000 d08=0000000000000000
s18=00000000 s19=00000000 d09=0000000000000000
s20=00000000 s21=00000000 d10=0000000000000000
s22=00000000 s23=00000000 d11=0000000000000000
s24=00000000 s25=00000000 d12=0000000000000000
s26=00000000 s27=00000000 d13=0000000000000000
s28=00000000 s29=00000000 d14=0000000000000000
s30=00000000 s31=00000000 d15=0000000000000000
s32=00000000 s33=00000000 d16=0000000000000000
s34=00000000 s35=00000000 d17=0000000000000000
s36=00000000 s37=00000000 d18=0000000000000000
s38=00000000 s39=00000000 d19=0000000000000000
s40=00000000 s41=00000000 d20=0000000000000000
s42=00000000 s43=00000000 d21=0000000000000000
s44=00000000 s45=00000000 d22=0000000000000000
s46=00000000 s47=00000000 d23=0000000000000000
s48=00000000 s49=00000000 d24=0000000000000000
s50=00000000 s51=00000000 d25=0000000000000000
s52=00000000 s53=00000000 d26=0000000000000000
s54=00000000 s55=00000000 d27=0000000000000000
s56=00000000 s57=00000000 d28=0000000000000000
s58=00000000 s59=00000000 d29=0000000000000000
s60=00000000 s61=00000000 d30=0000000000000000
s62=00000000 s63=00000000 d31=0000000000000000
FPSCR: 00000000
Abort trap: 6
I am using the following qemu version -
qemu-system-arm --version
QEMU emulator version 2.5.0, Copyright (c) 2003-2008 Fabrice Bellard
I tried using the uboot method -
qemu-system-arm -hda linuxarm1.qcow2 -kernel uImage -initrd uInitrd -dtb apm-mustang.dtb -m 512 -M virt
Please help me with the issue and point out if I am missing something.
Regards
Dharmik
[Prev in Thread] | Current Thread | [Next in Thread] |