partysip-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Partysip-dev] My INVITE crashes partysip


From: Aymeric Moizard
Subject: RE: [Partysip-dev] My INVITE crashes partysip
Date: Mon, 20 May 2002 18:05:35 +0200 (CEST)

On Mon, 20 May 2002, Shen, Eran wrote:

>
> >did you remove /usr/lib/libosip.* and /usr/lib/libfsmtl.*?
> >It should work after that.
> shouldn't >make clean
> be enough?

No, it won't...

First, I was talking about the rpm!
But for information, 'make clean' won't delete 'installed' files
even if installed from the source...

> I will try with 0.4.4
> Thanks,
>
> Eran.
>
> Eran Shen
>
> Intel Corporation
> Telecommunications and Embedded Group
> P.O Box 58, Migdal Tefen, Israel
> Tel: +972-4-9105020
> <mailto:address@hidden>
>
>
>
>
>
> -----Original Message-----
> From: Aymeric Moizard [mailto:address@hidden
> Sent: Monday, May 20, 2002 6:16 PM
> To: Shen, Eran
> Cc: 'Partysip-Dev (E-mail)
> Subject: Re: [Partysip-dev] My INVITE crashes partysip
>
>
>
>
> On Mon, 20 May 2002, Shen, Eran wrote:
>
> > All well. Than I send this INVITE :
> >
> > INVITE sip:address@hidden SIP/2.0
> > Call-ID: address@hidden
> > From: <sip:address@hidden> ;tag=0-13c4-3ce8bd54-bd5d20-7f3f
> > To: <sip:address@hidden>
> > CSeq: 1 INVITE
> > Via: SIP/2.0/UDP 10.242.212.44:5060
> > Contact: <sip:address@hidden>
> > Content-Length:0
> >
> >
> > And a "segmentation fault" happen on partysip.
>
> Can you download again this file
> http://osip.atosc.org/download/partysip-0.4.4.tar.gz
>
> and tell me if the segfault still happen?
>
> > I could not enable --enable-trace & --enable-debug
> > due to the same problem of my previous email even if I ./configure again
> > libosip with it.
>
> did you remove /usr/lib/libosip.* and /usr/lib/libfsmtl.*?
> It should work after that.
>
> > NOTE: Since I have a Gateway the called party & the calling party have the
> > same address.
> > I hope partysip can live with it.
>
> no issue that I'm aware of.
>
> > Attached is my cfg file.
> >
> > Do I need to add the user I am registering to the users part of the cfg
> > file,
> > Even if I work w/o authentication?
>
> no user are needed.
>
> > Thanks,
> >
> > Eran.
> >
> > Eran Shen
> >
> > Intel Corporation
> > Telecommunications and Embedded Group
> > P.O Box 58, Migdal Tefen, Israel
> > Tel: +972-4-9105020
> > <mailto:address@hidden>
> >
> >
> >
> >
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]