[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] How to calibrate the airspeed?

From: Felix Ruess
Subject: Re: [Paparazzi-devel] How to calibrate the airspeed?
Date: Tue, 9 Aug 2016 21:40:25 +0200

Hi Tom,

there is currently no automatic procedure to calibrate an airspeed sensor.
Did you set the sensor type and pressure range that your sensor has correctly?

Hope that helps,

On Tue, Aug 2, 2016 at 2:36 PM, Tom H <address@hidden> wrote:
    I wanna measure airspeed with my MS4525D.However,the airspeed measured doesn't show the real value.It displays 0m/s when the real below 10m/s.And it displays 16m/s when the real value is 30m/s.
    I know that we can set the parameters for the ms45xx module.Such as "ms45xx_airspeed_scale","ms45xx_pressure_offset",etc.But,how can I get the calibrated parameters for my MS4525D? I have searched the wiki and found nothing about the calibration for the airspeed.
    Thank's a lot!

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]