|From:||Romney, Jefferson S|
|Subject:||Re: [Paparazzi-devel] GPS not working|
|Date:||Tue, 3 Apr 2012 03:57:07 +0000|
Okay you are using exactly what I was until My GPS broke. Yes the subsystem is in the airframe file.
<subsystem name="gps" type="ublox">
<configure name="GPS_BAUD" value="B38400"/>
this should be what it says but change the baud to whatever yours is. Ucenter should tell you what baud rate it is talking at. One thing I didn't like about the PPZUAV's GPS 13 board is it's lack of an led to tell you when it has lock. If you are getting lock on U-center and this code doesn't work, then I'm not sure what the problem is. I could look into it though.
From: paparazzi-devel-bounces+address@hidden [paparazzi-devel-bounces+address@hidden on behalf of Jaime Rubio address@hidden
Sent: Monday, April 02, 2012 9:48 PM
Subject: Re: [Paparazzi-devel] GPS not working
The subsystem is loaded through the airframe file, isn't it? About the baud rate, I should review how to do it. I am using a Ublox (LEA 6H mounted on a Paparazzi 13 board). About the PPM, we have checked the order several times and it seems to work properly, the only problem is that we cannot switch to manual mode to fully testing it.
On Mon, Apr 2, 2012 at 11:43 PM, Romney, Jefferson S <address@hidden> wrote:
Autopilot Team Lead
|[Prev in Thread]||Current Thread||[Next in Thread]|