RE: [Paparazzi-devel] XBee Modem Powering

[Simon Jobin]

Hi Matthew,

I have always use the 3v3 from conn serial1 to supply our Xbee and aerocomm 
20mW modems. I agree this is probably not the best things to do, but never had 
problems.
You can find breakout board for the Xbee at sparkfun but there is no 3v3 Reg on 
it. I am in the process of building one with supply and molex conn. I don't 
know when it will be finish, I am in mid term exams right now, but I will let 
you know.

Simon Jobin (VAMUdeS)



----------------------------------------> Date: Tue, 16 Oct 2007 12:19:07 
-0700> From: address@hidden> To: address@hidden> Subject: [Paparazzi-devel] 
XBee Modem Powering>> Group,>>> I just wanted to confirm that the 3V3 rail 
produced by the Tiny13 is> unsuitable for usage with the XBee Pro modem and I 
should instead solder> another 3V3 LDO linear reg. to the modem and send the 5V 
to it? Is> anyone using breakout boards or do they just solder directly to the 
module?>>> Regards,> Matthew Currie>>> 
_______________________________________________> Paparazzi-devel mailing list> 
address@hidden> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_________________________________________________________________
Envoie un sourire, fais rire, amuse-toi! Employez-le maintenant!
http://www.emoticonesgratuites.ca/?icid=EMFRCA120