[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] FBW and AP...
From: |
antoine . drouin |
Subject: |
Re: [Paparazzi-devel] FBW and AP... |
Date: |
Sun, 14 Oct 2007 21:14:39 +0200 |
User-agent: |
Internet Messaging Program (IMP) 3.2.5 |
and by the way, I think the best way to check if your rc is beeing decoded
correctly is to look in the FBW_STATUS message for the rc_status field
from conf/messages.xml
<message name="FBW_STATUS" ID="103">
<field name="rc_status" type="uint8" values="OK|LOST|REALLY_LOST"/>
<field name="mode" type="uint8" values="MANUAL|AUTO|FAILSAFE"/>
<field name="vsupply" type="uint8" unit="decivolt"/>
</message>
hth
Poine
Quoting address@hidden:
>
> Hi Alexis
>
> You can choose the direction of ppm signal
>
> from sw/airborne/arm7/ppm_hw.h
>
> /* enable capture 0.2 on falling edge + trigger interrupt */
> #if defined RADIO_CONTROL_TYPE && RADIO_CONTROL_TYPE == RC_FUTABA
> T0CCR = TCCR_CR2_F | TCCR_CR2_I;
> #elif defined RADIO_CONTROL_TYPE && RADIO_CONTROL_TYPE == RC_JR
> T0CCR = TCCR_CR2_R | TCCR_CR2_I;
> #else
> #error "ppm_hw.h: Unknown RADIO_CONTROL_TYPE"
> #endif
>
> HTH
>
> Poine
>
> Quoting Alexis Lussier Desbiens <address@hidden>:
>
> > Pascal,
> >
> > I check and the PPM signal is going to the LPC (I am using the
> > classix), the configuration file is good and I made sure that the RC
> > configuration file has the proper values (didn't had to change
> > anything... 7 channel, data pulse between 1-2ms and sync between
> > 5-15ms)... and it still doesn't seems to work (nothing output on my
> > classix pwm connector, and I only got 0,0,0,0,0,0,0 as the PPM from
> > the telemetry)!
> >
> > One thing that looks weird is that my PPM signal seems to be on
> > falling edge instead of rising edge as seen on the pictures on the
> > website. Do I need to do something for that?
> >
> > Thanks!
> >
> > Alexis
> >
> > On 10/11/07, Pascal Brisset <address@hidden> wrote:
> > > Alexis Lussier Desbiens wrote:
> > > > Anyway, I added the PPM signal to the "default" mode and I only get
> > > > 0,0,0,0,0... Can someone tell me which file I should look at to make
> > > > it work? Because right now... it doesn't seem to do much!
> > > >
> > >
> > > 1) Check the PPM signal on the appropriate pin (PPM_In, c.f.
> > > http://www.recherche.enac.fr/paparazzi/wiki/index.php/Tiny)
> > > 2) Check that your configuration includes the appropriate RC
> > > configuration file. The file name must appear in the conf.xml file (c.f.
> > > http://www.recherche.enac.fr/paparazzi/wiki/index.php/Conf.xml).
> > > The contents of this file is described in
> > > http://www.recherche.enac.fr/paparazzi/wiki/index.php/Radio_Control :
> > > - wrong attributes of the "radio" element will prevent the decoder to
> > > recognize any PPM frame;
> > > - same for a wrong number or channels.
> > >
> > > A oscilloscope may help !
> > >
> > > --Pascal
> > >
> > >
> > > _______________________________________________
> > > Paparazzi-devel mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > >
> >
> >
> > --
> > http://mecano.gme.usherb.ca/~alussierdesbiens
> > "De' remi facemmo ali"
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>