[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-developers] Raspberry Pi cannot accept call update by remo

From: Russell
Subject: Re: [Linphone-developers] Raspberry Pi cannot accept call update by remote, if the call is initiated from Raspberry Pi
Date: Wed, 11 Nov 2015 18:02:59 +0800

Oh, the version I installed is linphone4raspberry-3.9.0-cp27-none-any.whl. 
The PC versions works fine.

On Wed, Nov 11, 2015 at 6:00 PM, Russell <address@hidden> wrote:
Hi, Devs

I am building an application using linphone python module for raspberry pi. When I call an android linphone app from my application, the call is established successfully. But, the on android side, it cannot enable/disable video, it just shows the last image from from raspberry pi before doing the enable/disable.

On the other hand, if the call is initiated from the android app side, the android app can enable/disable video after call established. (I do not need to enable/disable video from raspberry pi, thus senarios not tested)

I used tcpdump to capture packets received and sent by Raspberry Pi when android app enable/disable video, it seems that the SIP response packet sent by Raspberry Pi is not correct, see attached image for a screenshot of the packets I captured

reply via email to

[Prev in Thread] Current Thread [Next in Thread]