[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Distance of a grob from its reference point

From: David Nalesnik
Subject: Re: Distance of a grob from its reference point
Date: Thu, 16 Jan 2020 15:42:50 -0600

Hi Robin,

On Thu, Jan 16, 2020 at 1:02 PM Robin Bannister <address@hidden> wrote:
> Paolo Prete wrote:
> > This is *precious* info. Please, can you tell/confirm  if
> >
> > 1) you are referring to \offset command ?
> No.  That would be premature in this case.
> > 2) is it applicable as a replacement for "\offset Y-offset" for *every*
> > grob that support Y-offset ?
> Well, I have trouble following your trains of thought.
> I won't try to understand that question.
> And I'm puzzled why you focus directly on the property Y-offset.
> As regards the \offset command:
> The section 'Properties which may be offset' at
> says the property must have a default setting in define-grobs.scm.
> OttavaBracket has the property outside-staff-padding because it supports
> the outside-staff-interface.
> but define-grobs.scm doesn't set it.
> So you can't use \offset in this case until that is amended.

This is an argument for adding these hidden default values directly to


reply via email to

[Prev in Thread] Current Thread [Next in Thread]