[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Libreboot] x200 tablet's LCD panel HV121WX6-110, supported?

From: arielmazatlan
Subject: Re: [Libreboot] x200 tablet's LCD panel HV121WX6-110, supported?
Date: Wed, 30 Dec 2015 17:06:34 -0700

Sorry, I know now what the article is referring to as LED backlit panel.
Is the light that illuminates the screen from the back am I right? I
think I can follow the instructions to find out about it from here:

But I'm still concern about my other questions. Hope you could help me


El mié, 30-12-2015 a las 16:43 -0700, arielmazatlan escribió:
> Hello everyone. 
> I have a x200 tablet and I was hoping to get it librebooted, and I'm
> trying to figure out if it would be possible to do so. I uploaded some
> photos:
> I'm reading the following:
> I quite do not understand the part where it talks about “AFFS/IPS
> panels”.
> Using “sudo get-edid | strings” I found that my LCD panel is a
> HV121WX6-110.
> The refereed page starts with “All LCD panels...  X200 Tablet are known
> to work” but then it recommends some specific models without the glass
> touchscreen protection or the digitizer (which could be removed), so I'm
> a little confuse. Will my HV121WX6-110 LCD panel work or do I have to
> get one of the recommended ones in that article?
> Also the article proceeds talking about some LED backlit panel. My x200
> tablet has some lights indicators on the back of the screen, would that
> mean that I'm in the case mentioned there were I'll need to get an
> inverter of some sort? I don't really need those LEDs, couldn't I just
> remove them all along if that were the case?
> Maybe I misunderstanding it all and it's all just a recommendation, but
> I feel it's not very well explained. Also there doesn't seem to be any
> mention of my HV121WX6-110 LCD panel on the site, so I'm a little worry
> it won't work.
> Thank you all.

Ariel Del Valle

Systems assistant

The Palms Resort of Mazatlan

reply via email to

[Prev in Thread] Current Thread [Next in Thread]