[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Getting NMEA data out from gpsd for use in u-center

From: Gary E. Miller
Subject: Re: Getting NMEA data out from gpsd for use in u-center
Date: Sun, 3 Oct 2021 10:59:33 -0700

Yo David!

On Sun, 3 Oct 2021 09:31:48 +0100
David Taylor <> wrote:

> I had forgotten the -G switch, although in this case it isn't
> required as u-center doesn't connect or doesn't recognise udp/tcp on
> 2947.

But -G is required to access gpsd remotely.  Once you can access gpsd on
your Windblows host, you just need a filter to connect it to u-center.

> gpspipe -r gives me just what I want, and it was then a matter of
> understanding "nc" to make it serve that outgoing data over a
> connection.

Also easy easier, run gpspipe on your Winblows host, connected to gpsd
that is running with -G.  Then no need for "nc".

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: pgpDW2JsepLW4.pgp
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]