[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gpsd-3.20 cross compilation

From: raaj lokanathan
Subject: Re: gpsd-3.20 cross compilation
Date: Fri, 15 May 2020 11:44:43 +0800

Hey Gary,

Attached is the gpsd log from my cross-compilation. I have attached the 3.20 and 3.19. It has the complete clean up to install as you mentioned. I hope this is sufficient?

On Fri, 15 May 2020 at 11:03, Gary E. Miller <address@hidden> wrote:
Yo raaj!

On Fri, 15 May 2020 09:53:55 +0800
raaj lokanathan <address@hidden> wrote:

> If I want to compile gpsd-3.20 which python version and gcc version is
> required for my cross-compilation?

Pretty much any gcc version n2 or above should be fine.
Python 2.6 or above.

> Currently, I am using armv7a-gcc5.4.0 and python 2.7. But there is an
> issue to compile gpsd-3.20. Whereas if cross-compile gpsd-3.19 there
> is no any errors.

So, once again, send the full output of your build, starting
with the clean, all the way to install.

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Thanks and regards,

Raaj Lokanathan

Attachment: gpsd-3.19-log
Description: Binary data

Attachment: gpsd-3.20-log
Description: Binary data

reply via email to

[Prev in Thread] Current Thread [Next in Thread]