[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] Create an SVG skyview image from JSON data

From: Gary E. Miller
Subject: Re: [gpsd-users] Create an SVG skyview image from JSON data
Date: Thu, 4 Oct 2018 15:54:03 -0700

Yo Niccolo!

On Thu, 4 Oct 2018 23:47:53 +0200
Niccolo Rigacci <address@hidden> wrote:

> Hi Gary, I admire your patience with my tries!
> > Firefox displays you sample fine, but "display skyview.svg" still
> > has a few issues.  Like the sat boxes are empty, no PRN.  
> I had a similar problem on my notebook: it turned out that 
> Imagemagick needs the help of two Debian packages: librsvg2-bin 
> and libmagickcore-6.q16-3-extra, otherwise the SVG rendering was 
> incomplete. I don't understand the real meaning of this, because 
> indeed Inkscape and Firefox were rendering the file with no 
> trouble.

I run Gentoo.  I looked at the various gimp install options and found
nothing.  Can you recommend a lightweight svg viewer that works?

> > still has complaints:  
> This is a mistery!

Not so much.  I musta swapped your old and new samples.  When I created
a new svg, it validated fine.  Still the issues with "display".

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

Attachment: pgpub2RHLZTTl.pgp
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]