[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] Interfacing remote CORS stations data to improve GPSD a

From: Christopher Story
Subject: Re: [gpsd-users] Interfacing remote CORS stations data to improve GPSD accuracy
Date: Fri, 19 May 2017 12:24:02 -0500

Log data...

Attachment: gpsd_sgfault.log
Description: Binary data

On May 19, 2017, at 12:10, Christopher Story <address@hidden> wrote:

So looking at this again I’m assuming (!) now that they mean you can just add more sources at the end of the command... so i did that..

/usr/sbin/gpsd -G -S 2948 -N /dev/serial0 tcp://

then i use telnet to connect to it...

Chriss-MacBook-Pro:~ cstory$ telnet 2948
Connected to
Escape character is '^]'.

Then copy in this to start the stream....


I get this:

Connection closed by foreign host.

but on the system console it shows this...

Segmentation fault

Im running the latest stable release..



On May 19, 2017, at 11:56, Christopher Story <address@hidden> wrote:


In looking at the man page for GPSD I’m not quite sure of the proper way to have GPSD access a local CORS data source for RTCM correction data in conjunction with the local GPS on a serial port..

i see references to tcp:// 

in my case i want to access Alabama DOT Cors data at tcp://

is there an example of this string?

This is my current string in PS listing...

/usr/sbin/gpsd -N /dev/serial0


reply via email to

[Prev in Thread] Current Thread [Next in Thread]